SN/T 0740-2010Rules for inspection of gunny bags for import and export (English PDF)

Foreword

Instead of the standard SN/T 0740-1997 "exports of jute sacks for the inspection." this standard compared with SN/T 0740-1997, the main changes are as follows.

--- Standard name from the "export of jute sacks for the inspection" to "import and export of jute sacks for the inspection";

--- Standard overall structure of the changes;

--- The scope was revised to apply to the import and export of jute sacks test content;

--- Abolition of the "definitions, symbols" section;

--- The original standard Chapter 4, "technical requirements" and Chapter 5, "test project" merged into Chapter 3, "Requirements", and subdivided into Chapter 3.1 "Appearance quality requirements" and Chapter 3.2 "Internal quality requirements";

--- Sampling program further refined into appearance of the test sample, the size of sacks, needle and thread count density test sample, broken Pub crack strength and quality inspection sampling;

--- Increased Chapter 7, "Packaging and Identification";

--- Appendix removed content "sack visual inspection condition".

Appendix A of this standard is an informative annex.

This standard is proposed and managed by the National Certification and Accreditation Administration Committee.

This standard is mainly drafted by. People's Republic of China Exit Inspection and Quarantine of Henan, Shandong, People's Republic of China Entry-Exit Inspection and Quarantine Bureau.

1 Scope

This standard specifies the requirements for the import and export of jute sacks, sampling, testing and judging the results.

This standard applies to jute, kenaf as raw materials import and export inspection and woven sacks.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan GB/T 3923.1 Textiles Tensile properties of fabrics - Part 1. breaking force and elongation Strip method Determination of GB/T 4668 woven fabric density

3 Requirements

4 Sampling