SN/T 0736.5-2010Test method of import and export fertilizers. Part 5: Determination of nitrogen content (English PDF)
进出口化肥检验方法 第5部分:氮含量的测定
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for SN/T 0736.5-2010 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
November 1, 2010
Implementation date
May 1, 2011
Scope
SN/T 0736.5-2010 is the English-translated version of 进出口化肥检验方法 第5部分:氮含量的测定.
SN/T 0736.5-2010 — SN/T 0736 provisions of this part of the determination of the nitrogen content of the fertilizer import and export. This section applies to the import and export of nitrogenous fertilizer testing.
Found what you need?
Document preview — SN/T 0736.5-2010
National Standard of the People's Republic of China
- Classification
- G 20
- Replacing
- SN/T 0736.5-1999
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Preparation, samples
- 4.1 Determination of nitrogen content --- distillation
Foreword
SN/T 0736 "Importers fertilizer test methods" is divided into 12 sections.
--- Part 1. sampling and sample preparation;
--- Part 2. Determination of moisture;
--- Part 3. Determination of particle size;
--- Part 4. Flame atomic absorption spectrometric method for the determination of sodium content;
--- Part 5. Determination of nitrogen content;
--- Part 6. Determination of phosphorus;
--- Part 7. Determination of potassium;
--- Part 8. Determination of shrinkage diurea content;
--- Part 9. Determination of chlorine content;
--- Part 10. Determination of the free acid;
--- Part 11. automatic analyzer nitrogen content;
--- Part 12. Determination of Arsenic, chromium, cadmium, mercury, lead by Inductively Coupled Plasma Mass Spectrometry.
This section SN/T Section 50736 of.
This section is amended to SN/T 0736.5-1999 "Determination of the import and export of fertilizer nitrogen content test method" carried out.
This section compared with the SN/T 0736.5-1999 The main changes are as follows.
--- According to GB/T 1.1-2009 "Standardization Guide Part 1 standard structure and drafting" and GB/T 20001.4-2001 "Rules for drafting standards - Part 4. Chemical analysis methods," the original standard configuration has been modified.
--- Test method distillation, formaldehyde method choreography.
--- Add nitrate-containing sample test method, amide nitrogen, melamine nitrogen and ammonia nitrogen in nitrogen content.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
This section is responsible for drafting unit. People's Republic of China Liaoning Province Exit Inspection and Quarantine.
1 Scope
SN/T 0736 provisions of this part of the determination of the nitrogen content of the fertilizer import and export.
This section applies to the import and export of nitrogenous fertilizer testing.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
Preparation of GB/T 601 chemical reagent standard titration solution Laboratory use specifications and test methods GB/T 6682 Analysis SN/T 0736.1 fertilizer import and export inspection methods of sampling and sample preparation
3 Preparation, samples
Press SN/T 0736.1 performed.
Test Method 4
4.1 Determination of nitrogen content --- distillation
4.1.1 Application
Suitable for containing ammonia nitrogen, nitrate nitrogen, amide nitrogen, and the determination of cyanamide nitrogen fertilizer nitrogen content in the composite.
4.1.2 Principle
Sample by nitration or reduction of various forms of nitrogen into ammonia nitrogen, was added excess lye, ammonium salt decomposition, by distillation, the distilled Ammonia with an excess of standard solution of sulfuric acid to absorb and then back titration with standard sodium hydroxide solution.
4.1.3 Reagents and materials
Unless otherwise indicated, the reagents used were of analytical grade water to comply with GB/T 6682 requirements for laboratory use third grade water.
4.1.3.1 sulfate. a density of 1.84g/mL.
4.1.3.2 hydrochloride. a density of 1.19g/mL.
4.1.3.3 Chromium powder. fineness of less than 250µm.
4.1.3.4 De Wada alloy (Cu50. Al45. Zn5). ground to about 20 mesh (the fineness of less than 850µm).
4.1.3.5 potassium sulfate.
4.1.3.6 copper sulfate pentahydrate.
4.1.3.7 Mixed Catalyst. 50g to 1000g of potassium sulfate and copper sulfate pentahydrate thoroughly mixed and ground carefully.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
How to Download SN/T 0736.5-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 601-2016 — Chemical Reagent - Preparations of Standard Volumetric Solutions
GB/T 6011-2005 — Test method for flammability characteristics of fiber-reinforced plastics-Incandescent rod method
GB/T 6011-2026 — Test method for the flammability characteristics of fibre reinforced plastics - Incandescent rod method
Secure payment via Stripe
Payments accepted
SN/T 0736.5-2010
$165.00