Valid

SN/T 0564.2-2012Titanium dioxide. Part 2: Determination of lead, mercury and soluble arsenic content in (English PDF)

钛白粉 第2部分:铅、汞和可溶砷含量的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (9 pages)

Need quotation for your management?

Get a formal quotation for SN/T 0564.2-2012 in 30 minutes.

Issued by

General Administration of Customs

Level / Type

National · Recommended

Issue date

December 12, 2012

Implementation date

July 1, 2013

Scope

SN/T 0564.2-2012 is the English-translated version of 钛白粉 第2部分:铅、汞和可溶砷含量的测定.

SN/T 0564.2-2012 - This standard specifies the graphite furnace atomic titania lead content absorption spectrometry, mercury and arsenic content of soluble atomic fluorescence spectrometry test methods.

This standard applies to titanium dioxide Determination of lead, mercury and arsenic content of soluble, lead, mercury and arsenic measurement range solubles were 0.2mg/kg ~ 100.0mg/kg, 0.01mg/kg ~ 10.00mg/kg, 0.1mg/kg ~ 80.0mg/kg.

Found what you need?

Document preview — SN/T 0564.2-2012

National Standard of the People's Republic of China

Classification
G13

Issued by: General Administration of Customs

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Determination of lead content
  • 3.1 Method summary
  • 3.2 Reagents and materials

Foreword

SN/T 0564 "titanium dioxide" is divided into two parts.

--- Part 1. Determination of iron oxide content;

--- Part 2. Determination of lead, mercury and arsenic content of soluble.

This section SN/T Section 20564 of.

This section drafted in accordance with GB/T 1.1-2009 given rules.

This section proposed and managed by the National Certification and Accreditation Administration Committee.

1 Scope

This standard specifies the graphite furnace atomic titania lead content absorption spectrometry, mercury and arsenic content of soluble atomic fluorescence spectrometry test methods.

This standard applies to titanium dioxide Determination of lead, mercury and arsenic content of soluble, lead, mercury and arsenic measurement range solubles were 0.2mg/kg ~ 100.0mg/kg, 0.01mg/kg ~ 10.00mg/kg, 0.1mg/kg ~ 80.0mg/kg.

2 Normative references

The following documents for the application of this document is essential, dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

Preparation of standard solution of GB/T 602 Determination of impurities in chemical reagents Laboratory use specifications and test methods GB/T 6682 Analysis GB/T 12806 Laboratory glassware single marking flask GB/T 12807 Laboratory glassware indexing pipette JJG694 atomic absorption spectrophotometer test procedures Fluorometer non-dispersive atomic test procedures JJG939

3 Determination of lead content

3.1 Method summary

Sample with hydrofluoric acid, nitric acid dissolution, the reaction was added an excess of hydrofluoric acid, at a wavelength of 283.3nm at the graphite furnace atomic absorption light Spectrometer measuring the absorbance of lead, lead content is calculated according to the standard curve method.

3.2 Reagents and materials

Unless otherwise stated, only recognized as analytical reagents and in line with two or more water GB/T 6682 regulations.

3.2.1 Hydrofluoric acid (rho = 1.13g/mL). pure class distinctions.

Warning. a strong corrosive hydrofluoric acid, should avoid contact with the skin.

3.2.2 nitric acid (rho = 1.42g/mL). pure class distinctions.

3.2.3 boric acid.

3.2.4 ammonium dihydrogen phosphate.

3.2.5 nitric acid solution (595).

3.2.6 solution of ammonium dihydrogen phosphate (5mg/mL).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.

Referenced standards

How to Download SN/T 0564.2-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
9 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SN/T 0564.2-2012

$195.00