Valid

SN/T 0464-2013Textile for import and export. Method for quantitative analysis of fiber. Polyurethane fiber mixture textiles (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (11 pages)

Need quotation for your management?

Get a formal quotation for SN/T 0464-2013 in 30 minutes.

Issued by

General Administration of Customs

Level / Type

National · Recommended

Issue date

January 1, 1970

Implementation date

January 1, 1970

Scope

SN/T 0464-2013 (Textile for import and export. Method for quantitative analysis of fiber. Polyurethane fiber mixture textiles) is available as an English-translated PDF.

SN/T 0464-2013 — This standard specifies the method for determining the quantitative analysis of textile spandex hand separation and dissolution method. This standard applies to spandex containing two component, three component content analysis of textile products.

Found what you need?

Document preview — SN/T 0464-2013

National Standard of the People's Republic of China

ICS
59.080.30
Classification
W 52
Replacing
SN/T 0464-2003

Issued by: General Administration of Customs

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3.1 Manual separation
  • 3.2 Dissolution method
  • 4 General test
  • 4.1 Sampling
  • 4.2 Sample Pretreatment

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

Instead of the standard SN/T 0464-2003 "Test Method for Textiles spandex content." this standard compared with SN/T 0464-2003, the main technical changes are as follows.

--- Modify the normative references;

--- Sulfuric acid (mass fraction 75%) increase in the scope of law polylactic acid fiber;

--- Hydrochloric acid (mass fraction is 20%) Law adds correction coefficient acetate fibers and polylactic acid fibers;

--- Formic acid (mass fraction 75%) Law adds polyester fibers and polylactic acid fibers correction coefficient;

--- Sodium thiocyanate (mass fraction 50%) increases the correction factor method of polylactic acid fiber;

--- Increased acid (mass fraction 80%) of lyocell correction coefficient;

--- Were dissolved with dimethyl acetamide instead of the method of dimethylformamide was dissolved method;

--- Increasing the sodium hypochlorite solution method;

--- Modify the sample is a laboratory sample;

--- Modify the sample pretreatment;

--- Drying of the sample, weighing method increases the halogen drying method;

--- Revised Appendix A.

This standard is proposed and managed by the National Certification and Accreditation Administration Committee.

This standard was drafted. Shenzhen Inspection and Quarantine Science Research Institute, Shenzhen People's Republic of China Exit Inspection and Quarantine, the Chinese people Republic of Jiangsu Entry-Exit Inspection and Quarantine Shandong People's Republic of China.

1 Scope

This standard specifies the method for determining the quantitative analysis of textile spandex hand separation and dissolution method.

This standard applies to spandex containing two component, three component content analysis of textile products.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2910.1-2009 Textiles - Quantitative chemical analysis - Part 1. General principles of testing GB/T 2910.2-2009 Textiles - Quantitative chemical analysis - Part 2. Three-component fiber mixture GB/T 8170 repair value expressed about the rules and limit values and judgment Prepare for chemical testing laboratory samples and specimens GB/T 10629 Textiles Principle 3

3.1 Manual separation

After the textile fiber component qualitative identification, using manual separation decomposition fabric or yarns of different types of fibers, dried, weighed, counted Calculating the fiber content of each component.

3.2 Dissolution method

After the textile fiber component qualitative identification, depending on the sample fibers and choose the appropriate chemical reagents and dissolution conditions, the One or two component fibers in the product is dissolved, the residue dry weight, based on corrected mass needed, from dissolved or undissolved substance weightlessness Calculation of the content of each component fiber.

4 General test

4.1 Sampling

According to GB/T 10629 regulations laboratory sample taken to be representative and sufficient to provide all the necessary samples, each sample at least 1g.

Fabric samples may include yarns of the different components in the sample should be considered during this.

4.2 Sample Pretreatment

According to GB/T 2910.1-2009 Appendix A, choose the appropriate way to go unless fibrous substance, and requires no substantial fiber component

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 11 pages — is available in the English PDF.

Referenced standards

How to Download SN/T 0464-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
11 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SN/T 0464-2013

$394.00