Valid

SN/T 0188.6-2011Rules for the weight survey by weighing instrument on import and export commodities. Part 6: Weight survey by balance (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (4 pages)

Need quotation for your management?

Get a formal quotation for SN/T 0188.6-2011 in 30 minutes.

Issued by

General Administration of Customs

Level / Type

National · Recommended

Issue date

May 31, 2011

Implementation date

December 1, 2011

Scope

SN/T 0188.6-2011 (Rules for the weight survey by weighing instrument on import and export commodities. Part 6: Weight survey by balance) is available as an English-translated PDF.

SN/T 0188.6-2011 — This section provides import and export commodities balance Akishige basic requirements, in view of the heavy methods and general procedures. This section applies to the import and export trade balance Akishige.

Found what you need?

Document preview — SN/T 0188.6-2011

National Standard of the People's Republic of China

Classification
A 53
Replacing
SN/T 0188-1993

Issued by: General Administration of Customs

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Akishige basic requirements
  • 4.1 Working conditions
  • 4.2 Technical requirements

Foreword

SN/T 0188 "Import and Export Commodity weight survey by scale of order" standard series is divided into seven sections.

--- Part 1. Terminology;

--- Part 2. General weight survey by scale;

--- Part 3. Cars weight survey by scale;

--- Part 4. Track Scale Akishige;

--- Part 5. Kam weight scales;

--- Part 6. Kam balance weight;

--- Part 7. Electronic hopper scales Kam weight.

This section SN/T 0188 "Import and Export Commodity weight survey by scale" Regulations Section 6.

The partial replacement of SN/T 0188-1993 "Import and Export Commodity weight authentication procedures weight survey by scale." And SN/T 0188-1993 phase Ratio, in addition to editorial changes outside the main technical changes are as follows.

--- Standard adds balance Akishige basic requirements in the scope, methods and general procedures Akishige;

--- Standard adds balance Akishige working conditions, technical conditions, safety and inspection and appraisal of the suspension of the requirement;

--- Standard adds balance Akishige methods and procedures;

--- Revised standard weight identification data, the results of treatment.

This section drafted in accordance with GB/T 1.1-2009 given rules.

This section proposed and managed by the National Certification and Accreditation Administration Committee.

1 Scope

This section provides import and export commodities balance Akishige basic requirements, in view of the heavy methods and general procedures.

This section applies to the import and export trade balance Akishige.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member, undated references, the latest edition (including any amendments) applies to this document.

SN/T 0188.1 Import and Export weight survey by scale procedures - Part 1. Terminology SN/T 0188.2-2010 weight survey by scale import and export commodities procedures - Part 2. General weight survey by scale

3 Terms and Definitions

Terms and definitions SN/T 0188.1 defined apply to this document.

4 Akishige basic requirements

4.1 Working conditions

4.1.1 Akishige scene, balance and related facilities and other conditions according to SN/T 0188.2-2010 4.1.1 and 4.1.3 are implemented.

4.1.2 scales should be placed on a flat solid platform.

4.1.3 scales working ambient temperature, relative humidity should meet the requirements in Table 1.

Table 1 Working conditions

Temperature/°C temperature fluctuation is less than/(°C/h) humidity less than/(% RH) 10 to 32 2.0 90 4.1.4 scales around the balance shall not affect the measurement of vibration and airflow performance exists, and avoid direct sunlight and away from heat.

Non-corrosive gases 4.1.5 balance the ambient air, the presence of high dust.

4.1.6 Akishige site should be equipped with necessary set of different magnitudes metered certified by the standard weight for the balance for verification.

4.1.7 scales should be placed in a location away from magnetic fields having sex objects or items or equipment capable of generating a magnetic field.

4.2 Technical requirements

4.2.1 scales accuracy class shall comply II - grade above criteria.

4.2.2 Scales scale intervals n should reach 20000<=n

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 4 pages — is available in the English PDF.

Referenced standards

How to Download SN/T 0188.6-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
4 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SN/T 0188.6-2011

$134.00