SN/T 0007.1-2016General rules for drafting inspection standards of import and export light industrial products--Part 1: Inspection procedure (English PDF)

Foreword

SN/T 0007 "import and export of light industrial product testing standards prepared by the basic provisions" is divided into two parts.

- Part 1. Inspection procedures;

Part 2. Test methods.

This part is part 1 of SN/T 0007.

This part is drafted in accordance with the rules given in GB/T 1.1-2009.

This part together with Part 2 together with SN/T 0007-2009 "import and export of light industrial products inspection procedures, test methods to prepare the basic standards Regulations ".

This section compares with SN/T 0007-2009 as follows.

- modified the "2 normative reference document" (see Chapter 2, Chapter 2 of the 2009 edition);

- the six terms and definitions specified in "3 Terms and Definitions" were deleted, and they were modified to refer to GB/T 1.1, GB/T.20000.1, GB/T 27000, SN/T 2755.1 (see Chapter 3, Edition 3.1, Rev. 3.1);

- the contents of the "4 requirements" in the relevant standard of test methods were deleted, and "inspection basis" and "inspection contents" were added (see 4.3, 2009 edition of 4.3,4.4,4.5);

--- "the typical elements of the standard arrangement of the example" modified to "structure and the preparation of the order", the structure of the map made a change (See Chapter 5, Chapter 5 of the 2009 edition);

- the contents of the "normative general elements" in the relevant standard of test methods were deleted and their contents were modified (see paragraph Chapter 7, Chapter 7 of the 2009 edition);

- Adjust the structure of the "normative technical elements" in accordance with the provisions of Chapter 5, "Normative technical requirements" in this section.

Applicability Modifications (see Chapter 8, Chapter 8 of the 2009 edition).

This part of the State Certification and Accreditation Administration Committee proposed and centralized.

The drafting unit. Hunan Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Shenzhen Entry-Exit Inspection and Quarantine of the People's Republic of China Bureau of Fujian Entry - Exit Inspection and Quarantine Bureau of the People's Republic of China.

1 Scope

SN/T 0007 this part of the provisions of the import and export of light industrial products inspection procedures (hereinafter referred to as the inspection procedures) prepared by the basic requirements, structure and the order of writing.

This part applies to the preparation of inspection procedures for import and export of light industrial products.

2 Normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 1.1-2009 Guidelines for standardization work Part 1. Structure and preparation of standards GB/T.20000.1 Standardized Work Guide Part 1. General terms for standardization and related activities Conformity assessment vocabulary and general principles GB/T 27000-2006 General requirements for classification management of industrial products for export industrial products Basic requirements for classification of industrial products for export classification SN/T 2755.3-2011 Basic requirements for the supervision and management of the classification of industrial products for export industrial products SN/T 2755.4-2011 Export Industrial Products Enterprise Classification Management Product Risk Classification Basic Requirements

3 Terms and definitions

GB/T 1.1, GB/T.20000.1, GB/T 27000, SN/T 2755.1 The terms and definitions defined apply to this document.

4 Requirements