Valid

SL/T 806-2020Fundamental technical requirements for pumps of water and hydropower projects (English PDF)

水利水电工程水泵基本技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (22 pages)

Need quotation for your management?

Get a formal quotation for SL/T 806-2020 in 30 minutes.

Issued by

Ministry of Water Resources of the People's Republic of China

Level / Type

National · Recommended

Issue date

November 30, 2020

Implementation date

February 28, 2021

Scope

SL/T 806-2020 is the English-translated version of 水利水电工程水泵基本技术条件.

SL/T 806-2020 — This standard specifies the performance assurance, technical requirements, scope of supply and inspection and test items for the pumps of the water supply and drainage pumping stations of water conservancy and hydropower projects in terms of product design and manufacturing.

It also proposes its packaging, transportation, storage, installation, operation, and maintenance. Regulations to be complied with.

This standard applies to water pump products whose delivery medium is clean water, sandy water, etc., and the delivery water temperature is normal temperature and meets one of the following conditions: a) The shaft power of the pump is 1000kW and above; b) The nominal diameter of the centrifugal pump impeller is 800mm and above ; c) Mixed flow pump, axial flow pump, tubular flow pump, the nominal diameter of the impeller is 1600mm and above.

Found what you need?

Document preview — SL/T 806-2020

National Standard of the People's Republic of China

ICS
27.140
Classification
P 98

Issued by: Ministry of Water Resources of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 2.1 Terms
  • 3 Terms and Definitions
  • 4 Overview
  • 4.1 General requirements
  • 5 Technical Requirements
  • 6 Calibration conditions
  • 6.1 Environmental conditions
  • 6.2 Measurement standards and other equipment
  • 7 Calibration items and calibration methods
  • 7.1 Calibration Items
  • 7.2 Calibration method
  • 8 Expression of calibration results
  • 9 Recalibration interval

1 Foreword

SL/T 806-2020 was issued by Ministry of Water Resources of the People's Republic of China on 30 November 2020 and has been in force since 28 February 2021.

The SL/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 22 pages in English translation.

2 Scope Preview

This standard specifies the performance assurance, technical requirements, scope of supply and inspection and test items for the pumps of the water supply and drainage pumping stations of water conservancy and hydropower projects in terms of product design and manufacturing. It also proposes its packaging, transportation, storage, installation, operation, and maintenance. Regulations to be complied with. This standard applies to water pump products whose delivery medium is clean water, sandy water, etc., and the delivery water temperature is normal temperature and meets one of the following conditions: a) The shaft power of the pump is 1000kW and above; b) The nominal diameter of the centrifugal pump impeller is 800mm and above ; c) Mixed flow pump, axial flow pump, tubular flow pump, the nominal diameter of the impeller is 1600mm and above. If the water contains obvious chemically corrosive substances or the gas content is extremely high, the supplier and the buyer can negotiate separately.

SL/T 806-2020 falls under ICS 27.140, in the field of energy and heat transfer engineering.

This catalogue holds 23 other SL/T standards in that field.

In this catalogue, SL/T standards carry edition years from 1994 to 2026.

3 About this standard

Issued by: Ministry of Water Resources of the People's Republic of China

English translation: about 22 pages

Chinese original: about 33,315 characters

4 Related standards

Standards on related subjects:

JB/T 2985-2016 — Bimetal bushings for construction machinery

JGJ 276-2012 — Technical code for safety of lifting in construction

SL/T 317-2023 — Specification for equipment installation and acceptance of pumping stations

SL 400-2016 — Technical code for installation safety of electromechanical equipment for water conservancy and hydropower project

5 Classification and status

International classification (ICS): 27.140

Chinese Standard Classification (CCS): P 98

Prefix SL/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.

How to Download SL/T 806-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
22 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SL/T 806-2020

$465.00