Valid

SL 516-2013Technical specification of reservoir-induced earthquake monitoring (English PDF)

水库诱发地震监测技术规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (26 pages)

Need quotation for your management?

Get a formal quotation for SL 516-2013 in 30 minutes.

Issued by

Ministry of Water Resources of the People's Republic of China

Level / Type

National · Mandatory

Issue date

January 1, 2013

Implementation date

January 1, 2013

Scope

SL 516-2013 is the English-translated version of 水库诱发地震监测技术规范.

SL 516-2013 is the Chinese standard "Technical specification of reservoir-induced earthquake monitoring". It was issued by Ministry of Water Resources of the People's Republic of China. It cites 2 other standards.

Found what you need?

Document preview — SL 516-2013

National Standard of the People's Republic of China

ICS
93.160
Classification
P55

Issued by: Ministry of Water Resources of the People's Republic of China

Contents

  • [Preview only]
  • 1 General Provisions
  • 2 Terms and Symbols
  • 2.1 Terms
  • 2.2 Symbols
  • 3 Soil Erosion Type Division
  • 3.1 Grade 1 Type Area
  • 3.2 Grade II Type Area
  • 3.3 Scope and Feature
  • 4 Soil Erosion Intensity Graduation
  • 4.1 INTENSITY GRADUATION OF WATER EROSION AND GRAVITY EROSION
  • 4.2 WIND EROSION AND MIXING EROSION (DEBRIS FLOW) INTENSITY GRADUATION
  • 4.3 Layout of Multipurpose Tunnel
  • 5 Soil Erosion Degree Graduation
  • 5.1 Selection of Pressure State
  • 5.2 Sectional Shape
  • 5.3 Sectional Dimension
  • 6 Hydraulic Design of Tunnel
  • 6.1 Calculation Principle
  • 6.2 Anti-cavitation Design of Hydraulic Tunnel with High Velocity
  • 7 Design of Soil Tunnel
  • 7.1 Support and Lining of Soil Tunnel
  • 7.2 Joint Division of Soil Tunnel Lining and its Anti-Seepage and Waterstop
  • 8 Design of Tunnel Section at Adverse Geology
  • 9 Tunnel Support and Lining
  • 9.1 General Requirements
  • 9.2 Loads and Load Combinations
  • 9.3 Concrete and Reinforced Concrete lining
  • 9.4 Prestressed Concrete Lining
  • 9.5 Unlined and Anchor-shotcrete Lined Tunnel
  • 9.6 Design of Reinforced Concrete Lining Bifurcated Tunnel
  • 9.7 Joints on Lining
  • 9.8 Design of Water Retaining Jam

1 Foreword

SL 516-2013 was issued by Ministry of Water Resources of the People's Republic of China on 17 September 2013 and has been in force since 17 December 2013.

The SL prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.

The document runs to 26 pages in English translation.

2 Scope Preview

SL 516-2013 falls under ICS 93.160, in the field of civil engineering.

This catalogue holds 78 other SL standards in that field.

In this catalogue, SL standards carry edition years from 1989 to 2020.

3 Normative references

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document.

GB 21075

SL 486

4 Where this standard sits

SL 516-2013 is classified under ICS 93.160, in the field of civil engineering.

It cites 2 standards, listed in full above.

5 About this standard

Issued by: Ministry of Water Resources of the People's Republic of China

English translation: about 26 pages (approximate)

6 Related standards

Standards on related subjects:

GB 50788-2012 — Technical code for water supply and sewerage of urban

SL 314-2004 — Design specification for roller compacted concrete dams

SL 282-2003 — Design specification for concrete arch dams

SL 521-2013 — Standard for quality evaluation on preliminary design of water resources and hydropower project

SL 514-2013 — Specifications for construction of hydraulic asphalt concrete

7 Classification and status

International classification (ICS): 93.160

Chinese Standard Classification (CCS): P 55

Prefix SL: mandatory standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 26 pages — is available in the English PDF.

Referenced standards

How to Download SL 516-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
26 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SL 516-2013

$650.00