SL 333-2005Technical specification for the water resources legislation (English PDF)
水利立法技术规范
This is a limited preview
Buy now to download the full PDF (13 pages)
Need quotation for your management?
Get a formal quotation for SL 333-2005 in 30 minutes.
Issued by
Ministry of Water Resources of the People's Republic of China
Level / Type
National · Mandatory
Issue date
November 15, 2005
Implementation date
March 1, 2006
Scope
SL 333-2005 is the English-translated version of 水利立法技术规范.
SL 333-2005 is the Chinese standard "Technical specification for the water resources legislation".
This standard applies to: the water basin management or administrative departments at all levels in accordance with the statutory authority and procedures, drafting, involved in the drafting and formulation related to the development, utilization, conservation, protection and management of water resources, as well as prevention of water damage and other water-related activities (hereinafter referred to wade Affairs) by laws, administrative regulations, local laws, regulations and regulatory documents (hereinafter referred to as Act) and related documents prepared. Issued on 2005-11-15, in force from 2006-03-01.
Found what you need?
Document preview — SL 333-2005
National Standard of the People's Republic of China
- ICS
- 03.160
- Classification
- A00
Contents
- [Preview only]
- 1 General Provisions
- 2 Terms and Symbols
- 2.1 Terms
- 2.2 Symbols
- 3 Soil Erosion Type Division
- 3.1 Grade 1 Type Area
- 3.2 Grade II Type Area
- 3.3 Scope and Feature
- 4 Soil Erosion Intensity Graduation
- 4.1 INTENSITY GRADUATION OF WATER EROSION AND GRAVITY EROSION
- 4.2 WIND EROSION AND MIXING EROSION (DEBRIS FLOW) INTENSITY GRADUATION
- 4.3 Layout of Multipurpose Tunnel
- 5 Soil Erosion Degree Graduation
- 5.1 Selection of Pressure State
- 5.2 Sectional Shape
- 5.3 Sectional Dimension
- 6 Hydraulic Design of Tunnel
- 6.1 Calculation Principle
- 6.2 Anti-cavitation Design of Hydraulic Tunnel with High Velocity
- 7 Design of Soil Tunnel
- 7.1 Support and Lining of Soil Tunnel
- 7.2 Joint Division of Soil Tunnel Lining and its Anti-Seepage and Waterstop
- 8 Design of Tunnel Section at Adverse Geology
- 9 Tunnel Support and Lining
- 9.1 General Requirements
- 9.2 Loads and Load Combinations
- 9.3 Concrete and Reinforced Concrete lining
- 9.4 Prestressed Concrete Lining
- 9.5 Unlined and Anchor-shotcrete Lined Tunnel
- 9.6 Design of Reinforced Concrete Lining Bifurcated Tunnel
- 9.7 Joints on Lining
- 9.8 Design of Water Retaining Jam
1 Foreword
SL 333-2005 was issued by Ministry of Water Resources of the People's Republic of China on 15 November 2005 and has been in force since 1 March 2006.
The SL prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.
The document runs to 13 pages in English translation.
2 Scope Preview
This standard applies to: the water basin management or administrative departments at all levels in accordance with the statutory authority and procedures, drafting, involved in the drafting and formulation related to the development, utilization, conservation, protection and management of water resources, as well as prevention of water damage and other water-related activities (hereinafter referred to wade Affairs) by laws, administrative regulations, local laws, regulations and regulatory documents (hereinafter referred to as Act) and related documents prepared.
SL 333-2005 falls under ICS 03.160, in the field of services and company organization.
This catalogue holds 2 other SL standards in that field.
In this catalogue, SL standards carry edition years from 1989 to 2020.
3 About this standard
Sector: Water Resources Industry Standard
Issued by: Ministry of Water Resources of the People's Republic of China
English translation: about 13 pages (approximate)
Chinese original: about 19,161 characters
4 Related standards
Standards on related subjects:
RB/T 033-2020 — Guidance on verification and validation of microbiological testing methods
SL/T 476-2023 — Water-saving product certification specification
SL 2-2014 — Quantities and units in water resources and hydropower
5 Classification and status
International classification (ICS): 03.160
Chinese Standard Classification (CCS): A 00
Prefix SL: mandatory standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 13 pages — is available in the English PDF.
How to Download SL 333-2005
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SL 274-2020 — Design code for rolled earth-rock fill dams
SL 285-2020 — Design specification for intakes of water and hydropower projects
SL 47-2020 — Technical specification for excavation construction of rock-foundation of hydraulic structures
Secure payment via Stripe
Payments accepted
SL 333-2005
$265.00