SL 286-2003Guidelines for the assessment of zones of groundwater overdraft (English PDF)
地下水超采区评价导则
This is a limited preview
Buy now to download the full PDF (19 pages)
Need quotation for your management?
Get a formal quotation for SL 286-2003 in 30 minutes.
Issued by
Ministry of Water Resources of the People's Republic of China
Level / Type
National · Mandatory
Issue date
May 12, 2003
Implementation date
August 1, 2003
Scope
SL 286-2003 is the English-translated version of 地下水超采区评价导则.
SL 286-2003 is the Chinese standard "Guidelines for the assessment of zones of groundwater overdraft".
This standard applies to: delineation of groundwater overdraft area Van Heel, overexploitation of groundwater zone classification and grading, areas of groundwater over-exploitation of dynamic monitoring, investigation, evaluation and data compilation. Issued on 2003-05-12, in force from 2003-08-01.
Found what you need?
Document preview — SL 286-2003
National Standard of the People's Republic of China
- ICS
- 13.060.10
- Classification
- Z50
Contents
- [Preview only]
- 1 General Provisions
- 2 Terms and Symbols
- 2.1 Terms
- 2.2 Symbols
- 3 Soil Erosion Type Division
- 3.1 Grade 1 Type Area
- 3.2 Grade II Type Area
- 3.3 Scope and Feature
- 4 Soil Erosion Intensity Graduation
- 4.1 INTENSITY GRADUATION OF WATER EROSION AND GRAVITY EROSION
- 4.2 WIND EROSION AND MIXING EROSION (DEBRIS FLOW) INTENSITY GRADUATION
- 4.3 Layout of Multipurpose Tunnel
- 5 Soil Erosion Degree Graduation
- 5.1 Selection of Pressure State
- 5.2 Sectional Shape
- 5.3 Sectional Dimension
- 6 Hydraulic Design of Tunnel
- 6.1 Calculation Principle
- 6.2 Anti-cavitation Design of Hydraulic Tunnel with High Velocity
- 7 Design of Soil Tunnel
- 7.1 Support and Lining of Soil Tunnel
- 7.2 Joint Division of Soil Tunnel Lining and its Anti-Seepage and Waterstop
- 8 Design of Tunnel Section at Adverse Geology
- 9 Tunnel Support and Lining
- 9.1 General Requirements
- 9.2 Loads and Load Combinations
- 9.3 Concrete and Reinforced Concrete lining
- 9.4 Prestressed Concrete Lining
- 9.5 Unlined and Anchor-shotcrete Lined Tunnel
- 9.6 Design of Reinforced Concrete Lining Bifurcated Tunnel
- 9.7 Joints on Lining
- 9.8 Design of Water Retaining Jam
1 Foreword
SL 286-2003 was issued by Ministry of Water Resources of the People's Republic of China on 12 May 2003 and has been in force since 1 August 2003.
The SL prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.
The document runs to 19 pages in English translation.
2 Scope Preview
This standard applies to: delineation of groundwater overdraft area Van Heel, overexploitation of groundwater zone classification and grading, areas of groundwater over-exploitation of dynamic monitoring, investigation, evaluation and data compilation.
SL 286-2003 falls under ICS 13.060.10, in the field of environment and health protection, safety.
This catalogue holds 44 other SL standards in that field.
In this catalogue, SL standards carry edition years from 1989 to 2020.
3 About this standard
Sector: Water Resources Industry Standard
Issued by: Ministry of Water Resources of the People's Republic of China
English translation: about 19 pages (approximate)
Chinese original: about 28,257 characters
4 Related standards
Standards on related subjects:
GB 3095-2012 — Ambient air quality standards
GB 3838-2002 — Environmental quality standards for surface water
GB 3097-1997 — Sea water quality standard
SL/T 466-2020 — Specification for ice sampling and pre-processing in the icebound season
SL 496-2010 — Determination of volatile aromatics in water by headspace-gas chromatography (HS-GC)
SL 463-2009 — Determination of phenols in water by gas chromatography
5 Classification and status
International classification (ICS): 13.060.10
Chinese Standard Classification (CCS): Z 50
Prefix SL: mandatory standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.
How to Download SL 286-2003
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SL 274-2020 — Design code for rolled earth-rock fill dams
SL 285-2020 — Design specification for intakes of water and hydropower projects
SL 47-2020 — Technical specification for excavation construction of rock-foundation of hydraulic structures
Secure payment via Stripe
Payments accepted
SL 286-2003
$600.00