SL 233.12-2016Calibration method of common instruments for hydraulic and river model test -- Part 12: gamma -ray type aerification concentration meter (English PDF)
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for SL 233.12-2016 in 30 minutes.
Issued by
Ministry of Water Resources of the People's Republic of China
Level / Type
National · Mandatory
Issue date
August 15, 2016
Implementation date
November 15, 2016
Scope
SL 233.12-2016 (Calibration method of common instruments for hydraulic and river model test -- Part 12: gamma -ray type aerification concentration meter) is available as an English-translated PDF.
SL 233.12-2016 is the Chinese standard "Calibration method of common instruments for hydraulic and river model test -- Part 12: gamma -ray type aerification concentration meter".
It was issued by Ministry of Water Resources of the People's Republic of China. Issued on 2016-08-15, in force from 2016-11-15.
Found what you need?
Document preview — SL 233.12-2016
National Standard of the People's Republic of China
- ICS
- 93.160
- Classification
- N04
Issued by: Ministry of Water Resources of the People's Republic of China
Contents
- [Preview only]
- 1 General Provisions
- 2 Terms and Symbols
- 2.1 Terms
- 2.2 Symbols
- 3 Soil Erosion Type Division
- 3.1 Grade 1 Type Area
- 3.2 Grade II Type Area
- 3.3 Scope and Feature
- 4 Soil Erosion Intensity Graduation
- 4.1 INTENSITY GRADUATION OF WATER EROSION AND GRAVITY EROSION
- 4.2 WIND EROSION AND MIXING EROSION (DEBRIS FLOW) INTENSITY GRADUATION
- 4.3 Layout of Multipurpose Tunnel
- 5 Soil Erosion Degree Graduation
- 5.1 Selection of Pressure State
- 5.2 Sectional Shape
- 5.3 Sectional Dimension
- 6 Hydraulic Design of Tunnel
- 6.1 Calculation Principle
- 6.2 Anti-cavitation Design of Hydraulic Tunnel with High Velocity
- 7 Design of Soil Tunnel
- 7.1 Support and Lining of Soil Tunnel
- 7.2 Joint Division of Soil Tunnel Lining and its Anti-Seepage and Waterstop
- 8 Design of Tunnel Section at Adverse Geology
- 9 Tunnel Support and Lining
- 9.1 General Requirements
- 9.2 Loads and Load Combinations
- 9.3 Concrete and Reinforced Concrete lining
- 9.4 Prestressed Concrete Lining
- 9.5 Unlined and Anchor-shotcrete Lined Tunnel
- 9.6 Design of Reinforced Concrete Lining Bifurcated Tunnel
- 9.7 Joints on Lining
- 9.8 Design of Water Retaining Jam
1 Foreword
SL 233.12-2016 was issued by Ministry of Water Resources of the People's Republic of China on 15 August 2016 and has been in force since 15 November 2016.
It is one of 14 parts of the SL 233 series.
The SL prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.
2 Scope Preview
SL 233.12-2016 falls under ICS 93.160, in the field of civil engineering.
This catalogue holds 78 other SL standards in that field.
In this catalogue, SL standards carry edition years from 1989 to 2020.
3 About this standard
Sector: Water Resources Industry Standard
Issued by: Ministry of Water Resources of the People's Republic of China
English translation: about 8 pages (approximate)
Chinese original: about 6,696 characters
4 Related standards
Other parts of this standard:
SL 233-2016 — Calibration method of common instruments for hydraulic and river model test
SL 233.1-2016 — Calibration method of common instruments for hydraulic and river model test
SL 233.2-2016 — Part 2: Tracking type water level meter
SL 233.3-2016 — Part 3: Wave height meter
SL 233.4-2016 — Part 4: Water pressure measuring system
SL 233.5-2016 — Part 5: Tension and pressure measuring system
SL 233.6-2016 — Part 6: Propeller type current meter
SL 233.7-2016 — Part 7: Acoustic doppler velocimetry
SL 233.8-2016 — Part 8: Flow measuring weir
SL 233.9-2016 — Part 9: Electromagnetic flowmeter
SL 233.10-2016 — Part 10: Ultrasonic flowmeter
SL 233.11-2016 — Part 11: Resistance type aerification concentration meter
SL 233.13-2016 — Part 13: Photoelectric sediment concentration meter
Standards on related subjects:
GB/T 42125.14-2023 — Safety requirements for electrical equipment for measurement, control and laboratory use - Part 14: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
GB/T 903-2019 — Colourless optical glass
GB/T 10586-2006 — Specification for damp heat testing chambers
5 Classification and status
International classification (ICS): 93.160
Chinese Standard Classification (CCS): N 04
Prefix SL: mandatory standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
How to Download SL 233.12-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SL 233.13-2016 — Calibration method of common instruments for hydraulic and river model test -- Part 13: Photoelectric sediment concentration meter
SL 233.11-2016 — Calibration method of common instruments for hydraulic and river model test -- Part 11: Resistance type aerification concentration meter
SL 233.10-2016 — Calibration method of common instruments for hydraulic and river model test -- Part 10: Ultrasonic flowmeter
SL 233.12-2016
$105.00