SJ/T 2936-2013General specification of medium power meter (English PDF)
中功率计通用规范
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for SJ/T 2936-2013 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2013
Implementation date
January 1, 2013
Scope
SJ/T 2936-2013 is the English-translated version of 中功率计通用规范.
SJ/T 2936-2013 is the Chinese standard "General specification of medium power meter". This standard specifies the requirements for the power meter, test methods, quality inspection rules, packaging, labeling, transport and storage.
This standard applies to the measurement frequencies above 10 MHz, power is within the range of 0. It was issued by Ministry of Industry and Information Technology. It cites 6 other standards.
Found what you need?
Document preview — SJ/T 2936-2013
National Standard of the People's Republic of China
- ICS
- 17.220
- Classification
- L85
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 1.1 Subject Contents
- 1.2 Application Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Height of Raised Access Floor
- 3.2 Abbreviations
- 3.3 Bearing of Four Conner
- 3.4 Systematically Resistance of Raised Access Floor
- 4 Requirements
- 4.1 Relation between the Host and the Device
- 4.2 UTI Interface
- 4.3 Requirements for the Physical Layer of UTI Device
- 4.4 Transport Stream Interface
- 4.5 Command Data Interface
- 4.6 Characteristic Requirements for UTI Physical Layer
- 5 Instruments, equipment, and materials
- 5.1 Diagram of Module in Connection with Host
- 5.2 DTV-CI Interface
- 5.4 Command Interface
- 5.5 Physical Requirement
- 5.6 UTI-HTU
- 5.7 Measuring Condition
- 6 Sample processing and determination
- 6.1 TSI-Physical, Link Layers
- 6.2 TSI-Transport Layer
- 6.3 TSI - Upper Layers
- 6.4 Initialization Test
- 6.5 Resource Manager Test
- 6.6 Application Information Resource Test
- 6.7 Date-time Information Resource Test
- 6.8 CA Application Resource Test
- 6.9 UTI Device TS Test
- 7 Marking, packaging, transportation and storage
- 7.1 Data Structure
- 7.2 Transport Layer
- 7.3 Session Layer
- 7.4 Resource of Resource Manager
- 7.5 Application Information Resources
- 7.6 Date and Time Information Resources
- 7.9 Hot Plugging/Unplugging Test
- 8 Test report
- 8.1 Introduction
- 8.2 Resources
- 8.3 Application Protocol Data Units (APDU)
- 8.4 System Management Resources
- 8.5 Host Control and Information Resources
- 8.6 Man-Machine Interface Resource
- 8.7 Resource Identifiers and Application Object Tags
- 9.1 Electromagnetic Compatibility
- 9.2 Safety
- 9.3 Materials
1 Foreword
SJ/T 2936-2013 was issued by Ministry of Industry and Information Technology on 17 October 2013.
The SJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 16 pages in English translation.
2 Scope Preview
This standard specifies the requirements for the power meter, test methods, quality inspection rules, packaging, labeling, transport and storage. This standard applies to the measurement frequencies above 10 MHz, power is within the range of 0.
SJ/T 2936-2013 falls under ICS 17.220, in the field of metrology and measurement.
This catalogue holds 17 other SJ/T standards in that field.
In this catalogue, SJ/T standards carry edition years from 1980 to 2026.
3 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document.
GB/T 191
GB 4793.1-2007 — Safety requirements for electrical equipment for measurement,control,andlaboratory use-Part 1:General requirements
GB/T 6587-2012 — General specification for electronic measuring instruments
GB/T 16511-1996 — Electrical and electronic measuring equipment. Documentation
GB/T 18268.1
SJ/Y 10463-1993
4 About this standard
Issued by: Ministry of Industry and Information Technology
English translation: about 16 pages (approximate)
5 Related standards
Standards on related subjects:
GM/T 0132-2023 — Implementation guide for information system cryptography application
GB/T 13166-2018 — Design margin and abuse tests for electronic measuring instrument
GA/T 1389-2017 — Information Security Technology - Guidelines for Grading of Classified Protection of Cyber Security
SJ/T 10297-2023 — General Specifications for LCR Meters
SJ/T 2089-2015 — Type designation for electronic measuring instruments
SJ/T 2938-2015 — Technical requirements and test methods for signal generator of television video
6 Classification and status
International classification (ICS): 17.220
Chinese Standard Classification (CCS): L 85
Prefix SJ/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 4793.1-2007Safety requirements for electrical equipment for measurement,control,andlaboratory use-Part 1:General requirements
- GB/T 6587-2012General specification for electronic measuring instruments
- GB/T 16511-1996Electrical and electronic measuring equipment. Documentation
- GB/T 18268.1Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
SJ/Y 10463-1993
How to Download SJ/T 2936-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 4793.1-2007 — Safety requirements for electrical equipment for measurement,control,andlaboratory use-Part 1:General requirements
GB/T 16511-1996 — Electrical and electronic measuring equipment. Documentation
GB/T 18268.1-2010 — Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
SJ/T 2936-2013
$529.00