Valid

SJ/T 11460.3.3-2016Backlight assemblies for liquid crystal displays - Part 3-3-1: Detailed specifications for direct-lit LED backlight assemblies for television receivers (English PDF)

液晶显示用背光组件 第3-3部分:电视接收机用LED背光组件空白详细规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for SJ/T 11460.3.3-2016 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

January 1, 2016

Implementation date

June 1, 2021

Scope

SJ/T 11460.3.3-2016 is the English-translated version of 液晶显示用背光组件 第3-3部分:电视接收机用LED背光组件空白详细规范.

SJ/T 11460.3.3-2016 is the Chinese standard "Backlight assemblies for liquid crystal displays - Part 3-3-1: Detailed specifications for direct-lit LED backlight assemblies for television receivers".

This standard specifies the definition, technical requirements, inspection methods, inspection rules, and requirements for marking, packaging, transportation, and storage of direct-lit LED backlight components for television receivers.

It is suitable for direct-type backlight components that use LED as the light source and are used in television receivers. It was issued by Ministry of Industry and Information Technology.

Found what you need?

Document preview — SJ/T 11460.3.3-2016

National Standard of the People's Republic of China

Classification
L47

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Subject Contents
  • 1.2 Application Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 3.1 Height of Raised Access Floor
  • 3.2 Abbreviations
  • 3.3 Bearing of Four Conner
  • 3.4 Systematically Resistance of Raised Access Floor
  • 4 Requirements
  • 4.1 Relation between the Host and the Device
  • 4.2 UTI Interface
  • 4.3 Requirements for the Physical Layer of UTI Device
  • 4.4 Transport Stream Interface
  • 4.5 Command Data Interface
  • 4.6 Characteristic Requirements for UTI Physical Layer
  • 5 Instruments, equipment, and materials
  • 5.1 Diagram of Module in Connection with Host
  • 5.2 DTV-CI Interface
  • 5.4 Command Interface
  • 5.5 Physical Requirement
  • 5.6 UTI-HTU
  • 5.7 Measuring Condition
  • 6 Sample processing and determination
  • 6.1 TSI-Physical, Link Layers
  • 6.2 TSI-Transport Layer
  • 6.3 TSI - Upper Layers
  • 6.4 Initialization Test
  • 6.5 Resource Manager Test
  • 6.6 Application Information Resource Test
  • 6.7 Date-time Information Resource Test
  • 6.8 CA Application Resource Test
  • 6.9 UTI Device TS Test
  • 7 Marking, packaging, transportation and storage
  • 7.1 Data Structure
  • 7.2 Transport Layer
  • 7.3 Session Layer
  • 7.4 Resource of Resource Manager
  • 7.5 Application Information Resources
  • 7.6 Date and Time Information Resources
  • 7.9 Hot Plugging/Unplugging Test
  • 8 Test report
  • 8.1 Introduction
  • 8.2 Resources
  • 8.3 Application Protocol Data Units (APDU)
  • 8.4 System Management Resources
  • 8.5 Host Control and Information Resources
  • 8.6 Man-Machine Interface Resource
  • 8.7 Resource Identifiers and Application Object Tags
  • 9.1 Electromagnetic Compatibility
  • 9.2 Safety
  • 9.3 Materials

1 Foreword

SJ/T 11460.3.3-2016 was issued by Ministry of Industry and Information Technology on 5 April 2016 and has been in force since 1 June 2021.

It is one of 14 parts of the SJ/T 11460 series.

The SJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard specifies the definition, technical requirements, inspection methods, inspection rules, and requirements for marking, packaging, transportation, and storage of direct-lit LED backlight components for television receivers. It is suitable for direct-type backlight components that use LED as the light source and are used in television receivers.

SJ/T 11460.3.3-2016 is filed under Chinese Standard Classification L47, in the field of electronic components and information technology.

This catalogue holds 1,078 other SJ/T standards without an ICS number.

In this catalogue, SJ/T standards carry edition years from 1980 to 2026.

3 About this standard

Sector: Electronics Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Other parts of this standard:

SJ/T 11460.1-2013 — Backlight units for liquid crystal displays. Part 1: Generic specification

SJ/T 11460.2-2014 — Backlight units for liquid crystal displays. Part 2: Cold Cathode Fluorescent Lamp (CCFL) backlight units. Blank detailspecification

SJ/T 11460.3.1-2014 — Backlight units for liquid crystal displays. Part 3-1: LED backlight unit for portable display. Blank detail specification

SJ/T 11460.3.2-2013 — Backlight units for liquid crystal displays. Part 3-2: LED backlight unit for monitor. Blank detail specification

SJ/T 11460.3.3.2-2025 — Display Light Source Assembly - Part 3-3-2: Detailed Specifications for Side-Lighted LED Backlight Assembly for Television Receivers

SJ/T 11460.3.4-2019 — LCD backlight assembly Part 3-4: Blank detail specification for automotive LED backlight assembly

SJ/T 11460.3.5-2019 — LCD backlight assembly Part 3-5: Blank detail specification for LED backlight assembly for household appliances

SJ/T 11460.3.6-2019 — Part 3-6: Blank detail specification for LED backlight assemblies for industrial instruments

SJ/T 11460.3.8-2025 — Display Light Source Components - Part 3-8: Detailed Specifications for Micro-miniature LED Backlight Components

SJ/T 11460.4-2018 — Liquid gas forging hammer

SJ/T 11460.6.1-2015 — Backlight unit for liquid crystal display. Part 6-1: Measuring method of optical and optoelectrical parameters

SJ/T 11460.6.2-2015 — Backlight unit for liquid crystal display. Part 6-2: Measuring methods of dynamic optical and optoelectrical parameters

SJ/T 11460.6.4-2023 — Display lighting unit - Part 6-4: Measuring methods of optoelectrical parameters of LED light board

Standards on related subjects:

SJ/T 11141-2017 — Generic specification for LED displays

SJ/T 11281-2017 — Measure methods of light emitting diode (LED) displays

GB/T 18910.2-2003 — Liquid crystal and solid-state display devices -- Part 2: Liquid crystal display modules sectional specification

5 Classification and status

Chinese Standard Classification (CCS): L 47

Prefix SJ/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download SJ/T 11460.3.3-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SJ/T 11460.3.3-2016

$419.00