SH/T — Petrochemical

Found: 1834 — page 24 of 39

PDF

SH/T 3132-2002 — Design specification for reinforced concrete tanks in petrochemical industry

National·Recommended
Superseded$650.00
PDF

SH/T 3133-2002 — Specification for cartographic symbols of present maps in petrochemical engineering

National·Recommended
Superseded$435.00
PDF

SH/T 3134-2002 — Technical specification for portable filling device in automobile filling station

National·Recommended
Superseded$175.00
PDF

SH/T 3512-2002 — Procedure Code for Construction of Spherical Tanks

National·Recommended
Superseded$470.00
PDF

SH/T 3519-2002 — Technical Code for Construction of Centrifugal Compressor Unit for Ethylene Plant

National·Recommended
Superseded$800.00
PDF

SH/T 3535-2002 — Specification for the construction and acceptance of concrete water pit engineering for petrochemical industry

National·Recommended
Superseded$205.00
PDF

SH/T 3536-2002 — Lifting Construction Specification for Petrochemical Engineering

National·Recommended
Superseded$235.00
PDF

SH/T 3537-2002 — Technical Code for Construction of Vertical Cylindrical Low Temperature Storage Tank

National·Recommended
Superseded$385.00
PDF

SH 3009-2001 — Specification for design of fuel gas system and combustible gas emission system in petrochemical enterprises

National·Mandatory
Superseded$135.00
PDF

SH 3501-2001 — Petrochemical toxic and combustible medium piping engineering construction and acceptance

National·Mandatory
Superseded$135.00
PDF

SH/T 0084-2001 — Standard test method for effect of cooling system chemical solutions on organic finishes for automotive vehicles

National·Recommended
Valid$120.00
15 pages

SH/T 0172-2001 — Deter mination of sulfur in petroleum products (high-temperature method)

National·Recommended
Valid$135.00
PDF

SH/T 0562-2001 — Standard test method for determination of yield stress and apparent viscosity of engine oils at low temperature

National·Recommended
Withdrawn$169.00
15 pages

SH/T 0701-2001 — Determination of total sediment in residual fuel oils by hot filtration

National·Recommended
Valid$105.00
15 pages

SH/T 0702-2001 — Determination of total sediment in residual fuel oils (standard procedures for ageing)

National·Recommended
Valid$115.00
PDF

SH/T 0704-2001 — Standard test method for nitrogen in petroleum and petroleum products by boat-inlet chemiluminescence

National·Recommended
Withdrawn$169.00
15 pages

SH/T 0705-2001 — Standard test method for determination of vanadium in heavy oils by spectrophotometry

National·Recommended
Valid$85.00
15 pages

SH/T 0706-2001 — Petroleum products. Determination of aluminium and silicon in fuel oils. Inductively coupled plasma emission and atomic absorption spectroscopy methods

National·Recommended
Valid$237.00
15 pages

SH/T 0708-2001 — Standard test method for evaluating detergency and general performance of water-cooled two-stroke gasoline engine oil (OMC 70HP)

National·Recommended
Valid$325.00
15 pages

SH/T 0709-2001 — Standard test method for evaluating detergency and general performance of water-cooled two-stroke gasoline engine oil (Mercury 15HP)

National·Recommended
Valid$355.00
15 pages

SH/T 0710-2001 — Detergency test procedure for evaluating air-cooled two-stroke gasoline engine oil (EGD)

National·Recommended
Valid$255.00
PDF

SH/T 1140-2001 — Ethylbenzene for industrial use. Specification

National·Recommended
Superseded$40.00
PDF

SH/T 1148-2001 — Ethylbenzene for industrial use. Determination of purity and hydrocarbon impurities. Gas chromatographic method

National·Recommended
Superseded$85.00
PDF

SH/T 1501-2001 — Synthetic rubber latex. Preparation of dry polymer

National·Recommended
Superseded$85.00
PDF

SH/T 1610-2001 — Styrene-butadiene block copolymer

National·Recommended
Superseded$249.00
PDF

SH/T 3096-2001 — Material selection guideline for design of major equipment in key units processing sour crude oil

National·Recommended
Superseded$525.00
PDF

SH/T 3109-2001 — Specifications for design of additive facilities in refineries

National·Recommended
Superseded$434.00
PDF

SH/T 3123-2001 — Petrochemical monitoring code for controlled water test to preload steel storage tanks subgrade

National·Recommended
Superseded$780.00
15 pages

SH/T 3124-2001 — Legend of water supply and drainage process flow in petrochemical industry

National·Recommended
Valid$435.00
15 pages

SH/T 3127-2001 — Technical standard for chrome-molybdenum alloy steel plug-welding return of petrochemical tubular heater

National·Recommended
Valid$375.00
PDF

SH/T 3516-2001 — Technical specification for construction of FCCU axial flow compressor-flue gas turbine trains

National·Recommended
Superseded$1,250.00
PDF

SH/T 3517-2001 — Technical standard for construction of steel piping for petrochemical industry

National·Recommended
Superseded$1,400.00
PDF

SH/T 3530-2001 — Construction technique standard for vertical cylindrical steel storage tank for petrochemical industry

National·Recommended
Superseded$2,249.00
PDF

SH 3011-2000 — General rule of process plant layout design for petrochemical industry

National·Mandatory
Superseded$195.00
PDF

SH 3012-2000 — General rule of piping layout design for petrochemical industry

National·Mandatory
Superseded$285.00
PDF

SH 3518-2000 — Code for valves inspection and management

National·Mandatory
Superseded$105.00
8 pages

SH/T 0124-2000 — Determination of oxidation stability of inhibited turbine oils

National·Recommended
Valid$85.00
PDF

SH/T 0422-2000 — Standard test method for ash in bitumen

National·Recommended
Valid$120.00
PDF

SH/T 0474-2000 — Standard test method for gasoline diluent in used gasoline engine oils by gas chromatography

National·Recommended
Withdrawn$169.00
PDF

SH/T 0538-2000 — Criteria for change of compress oils used in light duty rotary oil-flooded air compressor

National·Recommended
Withdrawn$169.00
PDF

SH/T 0604-2000 — Crude petroleum and petroleum products. Determination of density. Oscillating U-tube method

National·Recommended
Valid$120.00
9 pages

SH/T 0687-2000 — Standard test method for measurement of lubricity of aviation turbine fuels by the ball-on-cylinder lubricity evaluator (BOCLE)

National·Recommended
Valid$165.00
7 pages

SH/T 0688-2000 — Petroleum products and lubricants. Determination of base number. Potentiometric titration method

National·Recommended
Valid$135.00
7 pages

SH/T 0689-2000 — Standard test method for determination of total sulfur in light hydrocarbons, motor fuels and oils by ultraviolet fluorescence

National·Recommended
Valid$165.00
PDF

SH/T 0690-2000 — Standard test method for distillate fuel storage stability at 43 Celsius

National·Recommended
Withdrawn$169.00
4 pages

SH/T 0691-2000 — Standard test method for determining the effect of lubricants on swelling property of synthetic rubbers

National·Recommended
Valid$55.00
12 pages

SH/T 0692-2000 — Rust preventive oils

National·Recommended
Valid$235.00
PDF

SH/T 0693-2000 — Standard test method for determination of benzene, boluene, ethylbenzene, p/m-xylene, o-xylene, C9 and heavier aromatics, and total aromatics in finished gasoline by gas chromatography

National·Recommended
Valid$120.00