JB/T — Machinery
Found: 18110 — page 332 of 378
Valid
JB/T 7625.1-1994 — Thyristor modules - Test methods - General rules
Industry·Recommended
Instant delivery (0–9 sec)
$170.0015 pages
Valid
JB/T 7625.2-1994 — Test methods for thyristor modules - Pairs of arms and anti-parallel pairs of arms
Industry·Recommended
Instant delivery (0–9 sec)
$170.0015 pages
Valid
JB/T 7625.3-1994 — Test methods for thyristor modules - Single-phase bridges and three-phase bridges
Industry·Recommended
Instant delivery (0–9 sec)
$230.0015 pages
Valid
JB/T 7626-1994 — Reverse blocking triode thyristors - Test methods
Industry·Recommended
Instant delivery (0–9 sec)
$1,470.0033 pages
Valid
JB/T 7628-1994 — KN series 100 A-60 A to 400 A-400 A case-rated reverse conducting triode thyristors - Detail specification
Industry·Recommended
Instant delivery (0–9 sec)
$440.0015 pages
Valid
JB/T 7629-1994 — Specification for design and installation of refractory fiber furnace linings
Industry·Recommended
Instant delivery (0–9 sec)
$380.0021 pages
Valid
JB/T 7632-1994 — Oil-immersed iron-core series reactors - Test guide
Industry·Recommended
Instant delivery (0–9 sec)
$194.0015 pages
Valid
JB/T 7633-1994 — Spiral plate forced-oil water coolers for transformers
Industry·Recommended
Instant delivery (0–9 sec)
$290.0015 pages
Valid
JB/T 7634-1994 — Slot insulation inserting machines for small power motors
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7635-1994 — Battery-powered industrial trucks - Complete vehicle test methods
Industry·Recommended
Instant delivery (0–9 sec)
$1,054.0020 pages
Valid
JB/T 7636-1994 — Battery-powered industrial trucks - Series spectrum
Industry·Recommended
Instant delivery (0–9 sec)
$400.0015 pages
Valid
JB/T 7637-1994 — Large ring-type coil taping machines - Technical specifications
Industry·Recommended
Instant delivery (0–9 sec)
$170.0015 pages
Valid
JB/T 7639.1-1994 — Cold stamped metal parts for relays and relay equipment - General technical specifications
Industry·Recommended
Instant delivery (0–9 sec)
$80.0015 pages
Valid
JB/T 7639.2-1994 — Cold stamped metal parts for relays and relay equipment - Tolerances
Industry·Recommended
Instant delivery (0–9 sec)
$140.0015 pages
Valid
JB/T 7640-1994 — Cross-flow (Banki) hydraulic turbines - Series spectrum
Industry·Recommended
Instant delivery (0–9 sec)
$170.0015 pages
Valid
JB/T 7641.1-1994 — Electric drive mining dump trucks - Technical specifications
Industry·Recommended
Instant delivery (0–9 sec)
$110.0015 pages
Valid
JB/T 7641.2-1994 — Electric drive mining dump trucks - Test methods
Industry·Recommended
Instant delivery (0–9 sec)
$350.0020 pages
Valid
JB/T 7642.1-1994 — Stamping die parts and technical specifications - General-purpose die sets - Round upper die bases with shank
Industry·Recommended
Instant delivery (0–9 sec)
$170.0015 pages
Valid
JB/T 7642.2-1994 — Stamping die parts and technical specifications - General-purpose die sets - Rectangular upper die bases with shank
Industry·Recommended
Instant delivery (0–9 sec)
$170.0015 pages
Valid
JB/T 7642.3-1994 — Stamping die parts and technical specifications - General-purpose die sets - Type A upper die bases
Industry·Recommended
Instant delivery (0–9 sec)
$170.0015 pages
Valid
JB/T 7642.4-1994 — Stamping die parts and technical specifications - General-purpose die sets - Type B lower die bases
Industry·Recommended
Instant delivery (0–9 sec)
$170.0015 pages
Valid
JB/T 7642.5-1994 — Stamping die parts and technical specifications - General-purpose die sets - Lower die bases for bending dies
Industry·Recommended
Instant delivery (0–9 sec)
$170.0015 pages
Valid
JB/T 7645.1-1994 — Guiding devices for stamping dies - Type A small guide pillars
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7645.2-1994 — Guiding devices for stamping dies - Type B small guide pillars
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7645.3-1994 — Guiding devices for stamping dies - Small guide bushings
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7645.4-1994 — Guiding devices for stamping dies - Plate-clamped guide pillars
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7645.5-1994 — Guiding devices for stamping dies - Plate-clamped guide bushings
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7645.6-1994 — Guiding devices for stamping dies - Clamping plates
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7645.7-1994 — Guiding devices for stamping dies - Guide pillar holders
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7645.8-1994 — Guiding devices for stamping dies - Guide bushing holders
Industry·Recommended
Instant delivery (0–9 sec)
$110.0015 pages
Valid
JB/T 7646.1-1994 — Stamping die shanks - Part 1: Press-in shanks
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7648.1-1994 — Pitch punches and stock guides for stamping dies - Pitch punches
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7648.2-1994 — Pitch punches and stock guides for stamping dies - Type A pitch punch stops
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7648.3-1994 — Pitch punches and stock guides for stamping dies - Type B pitch punch stops
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7648.4-1994 — Pitch punches and stock guides for stamping dies - Type C pitch punch stops
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7648.5-1994 — Stamping die parts and their technical specifications - Side cutters and stock guides - Stock guide plates
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7648.6-1994 — Pitch punches and stock guides for stamping dies - Stock support plates
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7649.1-1994 — Stop and spring ejection devices for stamping dies - Starting stop devices
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7649.10-1994 — Stop and spring ejection devices for stamping dies - Fixed stop pins
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7649.2-1994 — Stop and spring ejection devices for stamping dies - Spring core posts
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7649.3-1994 — Stop and spring ejection devices for stamping dies - Spring side pressure devices
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7649.4-1994 — Stop and spring ejection devices for stamping dies - Side pressure spring leaves
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7649.5-1994 — Stop and spring ejection devices for stamping dies - Spring-loaded stop devices
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7649.6-1994 — Stop and spring ejection devices for stamping dies - Torsion spring-loaded stop devices
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7649.7-1994 — Stop and spring ejection devices for stamping dies - Return-type stop devices
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7649.8-1994 — Stop and spring ejection devices for stamping dies - Steel ball spring-loaded stop devices
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages
Valid
JB/T 7649.9-1994 — Stop and spring ejection devices for stamping dies - Sliding stop pins
Industry·Recommended
Instant delivery (0–9 sec)
$780.0020 pages
Valid
JB/T 7650.1-1994 — Stamping die parts and their technical specifications - Stripping devices - Shouldered ejector pins
Industry·Recommended
Instant delivery (0–9 sec)
$174.0015 pages