GB/T — National Recommended

Found: 76458 — page 1152 of 1593

PDF

GB/T 3804-2004 — 3.6 kV~40.5 kV high voltage a.c. load switches

National·Recommended
Superseded$650.00
PDF

GB/T 3832.1-2004 — Broaches shanks - Part 1: Rectangular shanks

National·Recommended
Superseded$205.00
PDF

GB/T 3832.2-2004 — Broaches shanks - Part 2: Round shanks

National·Recommended
Superseded$245.00
PDF

GB/T 3832.3-2004 — Broaches shanks - Part 3: Round follower end

National·Recommended
Superseded$205.00
20 pages

GB/T 3859.4-2004 — Semiconductor converter - Self-commutated semiconductor converters including direct d.c. converters

National·Recommended
Valid$225.00
PDF

GB/T 3939.1-2004 — Nomenclature and signs of main fishing gear materials - Netting twine

National·Recommended
Superseded$210.00
PDF

GB/T 3939.2-2004 — Nomenclature and signs of main fishing gear materials - Netting

National·Recommended
Superseded$210.00
PDF

GB/T 3939.3-2004 — Nomenclature and signs of main fishing gear material - Rope

National·Recommended
Superseded$85.00
PDF

GB/T 3939.4-2004 — Nomenclature and signs of main fishing gear material - Float

National·Recommended
Superseded$85.00
PDF

GB/T 3939.5-2004 — Nomenclature and signs of main fishing gear material - Sinker

National·Recommended
Superseded$85.00
13 pages

GB/T 3984.1-2004 — Power capacitors for induction heating installations -- Part 1: General

National·Recommended
Valid$195.00
7 pages

GB/T 3984.2-2004 — Power capacitors for induction heating installations -- Part 2: Ageing test, destruction test and requirements for disconnecting internal fuses

National·Recommended
Valid$105.00
PDF

GB/T 4026-2004 — Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system

National·Recommended
Superseded$360.00
PDF

GB/T 4107-2004 — Determination of apparent density of magnesium powder Scott volumetric method

National·Recommended
Withdrawn$205.00
PDF

GB/T 4108-2004 — Magnesium powder and aluminium-magnesium alloy powder determination of particle size - Dry sieving method

National·Recommended
Withdrawn$165.00
PDF

GB/T 4137-2004 — Rare earth ferrosilicon alloy

National·Recommended
Superseded$130.00
PDF

GB/T 4138-2004 — Rare earth ferrosilicon magnesium alloy

National·Recommended
Superseded$130.00
PDF

GB/T 4139-2004 — Ferrovanadium

National·Recommended
Superseded$165.00
15 pages

GB/T 4160-2004 — Steel-strain ageing sensibility test(Charpy impact method)

National·Recommended
Valid$85.00
4 pages

GB/T 4211.1-2004 — High speed steel tool bits -- Part 1: Types and dimensions

National·Recommended
Valid$25.00
15 pages

GB/T 4211.2-2004 — High speed steel tool bits--Part 2:Technical requirements

National·Recommended
Valid$89.00
PDF

GB/T 4223-2004 — Steel scrap

National·Recommended
Superseded$205.00
PDF

GB/T 4243-2004 — Long fluted machine reamers, Morse tape shanks

National·Recommended
Superseded$145.00
PDF

GB/T 4244-2004 — Machine reamers with edge inclination with parallel shanks

National·Recommended
Superseded$249.00
15 pages

GB/T 4245-2004 — Technical conditions for machine reamers

National·Recommended
Valid$90.00
3 pages

GB/T 4246-2004 — Special tolerances for reamers

National·Recommended
Valid$80.00
PDF

GB/T 4247-2004 — Machine bridge reamers with Morse taper shanks

National·Recommended
Superseded$85.00
15 pages

GB/T 4248-2004 — Technical conditions for handtaper 1: 50 pin reamers

National·Recommended
Valid$55.00
15 pages

GB/T 4250-2004 — Taper reamers--Technical requirements

National·Recommended
Valid$89.00
PDF

GB/T 4251-2004 — Machine reamers with parallel shanks with carbide tips

National·Recommended
Superseded$135.00
PDF

GB/T 4252-2004 — Machine reamers with Morse taper shanks with carbide tips

National·Recommended
Superseded$85.00
PDF

GB/T 4253-2004 — Reamers with carbide tips - Technical requirements

National·Recommended
Superseded$165.00
PDF

GB/T 4256-2004 — Core drills with parallel shanks and with Morse taper shanks

National·Recommended
Superseded$150.00
15 pages

GB/T 4257-2004 — Core drills--Technical requirements

National·Recommended
Valid$90.00
1 pages

GB/T 4258-2004 — Parallel shanks countersinks for angles 60-degree, 90-degreeand 120-degreeinclusive

National·Recommended
Valid$49.00
15 pages

GB/T 4259-2004 — Countersinks--Technical requirements

National·Recommended
Valid$89.00
3 pages

GB/T 4260-2004 — Counterbores with parallel shanks and solid pilots

National·Recommended
Valid$89.00
4 pages

GB/T 4261-2004 — Counterbores with Morse taper shanks and detachable pilots

National·Recommended
Valid$55.00
15 pages

GB/T 4262-2004 — Counterbores--Technical requirement

National·Recommended
Valid$89.00
3 pages

GB/T 4263-2004 — Countersinks, 90-degree, with parallel shanks and solid pilots

National·Recommended
Valid$89.00
4 pages

GB/T 4264-2004 — Countersinks, 90-degree, with Morse taper shanks and detachable pilots

National·Recommended
Valid$89.00
15 pages

GB/T 4265-2004 — 90°Countersinks with pilots--Technical requirements

National·Recommended
Valid$89.00
4 pages

GB/T 4266-2004 — Detachable pilots for use with counterbores and countersinks

National·Recommended
Valid$85.00
5 pages

GB/T 4267-2004 — Rotating tools with parallel shanks -- Diameters of shanks and sizes of driving squares

National·Recommended
Valid$125.00
PDF

GB/T 4296-2004 — Inspection method for microstructure of wrought magnesium alloy

National·Recommended
Superseded$390.00
15 pages

GB/T 4297-2004 — Inspection method for macrostructure of wrought magnesium alloy products

National·Recommended
Valid$225.00
15 pages

GB/T 4380-2004 — Assessment of departure from roundness--Two-and three-point methods

National·Recommended
Valid$259.00
33 pages

GB/T 4549.1-2004 — Railway vehicle vocabulary - Part 1: Basic vocabulary

National·Recommended
Valid$155.00