QC/T 729-2005Technical specifications for automotive alternators (English PDF)
汽车用交流发电机技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for QC/T 729-2005 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 14, 2005
Implementation date
July 1, 2005
Scope
QC/T 729-2005 is the English-translated version of 汽车用交流发电机技术条件.
QC/T 729-2005 is the Chinese standard "Technical specifications for automotive alternators". Its scope clause reads: This standard specifies the requirements, test methods, inspection rules, marking, package, storage and preservation of automotive alternator.
This standard is applicable to automotive alternator (hereinafter referred to as "alternator"). Its clauses include terminologies and definitions; requirements.
Found what you need?
Document preview — QC/T 729-2005
National Standard of the People's Republic of China
- Replacing
- QC/T 29094-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative References
- 3 Terminologies and Definitions
- 4 Requirements
- 5 Test Methods
- 6 Inspection Rules
- 7 Marking, Packaging, Storage and Preservation
- Appendix A (Normative) Generator Operating Performance at Cold and Hot State
1 Scope
This standard specifies the requirements, test methods, inspection rules, marking, package, storage and preservation of automotive alternator.
This standard is applicable to automotive alternator (hereinafter referred to as "alternator").
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB 18655 Limits and Methods of Measurement of Radio Disturbance Characteristics for the Protection of Receivers Used on Board Vehicles (idt IEC/CISPR 25)
QC/T 413-2002 Basic Technical Requirements for Automotive Electric Equipment
QC/T 424 Test Method for Electrical Characteristic of Automotive Alternator
ISO 7637-2:2004 Road Vehicles - Electrical Disturbances from Conduction and Coupling - Part 2: Electrical Transient Conduction along Supply Lines Only
3 Terminologies and Definitions
For the purposes of this standard, the following terminologies and definitions apply.
3.1 Test voltage, Ut
The specified voltage value when testing the characteristics of output current.
3.2 Rated speed, nR
The speed of alternator when testing the hot-state rated current output IR at the ambient temperature of 23°C±5°C and test voltage Ut.
3.3 Maximum operating speed, nmax
The maximum rotation speed that may appear when alternator is actually used.
3.4 Cold output of alternator
The cold current output value of alternator at the ambient temperature of 23°C±5°C and test voltage Ut.
3.5 Hot output of alternator
The current output value of the alternator when it operates continuously for more than 0.5h at the ambient temperature of 23°C±5°C and test voltage Ut and its body temperature reaches stable state.
4 Requirements
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of QC/T 729
| Edition | Title | Revision | Status |
|---|---|---|---|
| QC/T 729-2005 | Technical specifications for automotive alternators | current edition | Current |
| QC/T 29094-1992 | Technical specifications for automotive alternators | previous edition | Superseded |
This page sells the current edition, QC/T 729-2005. Earlier editions are listed for reference only.
How to Download QC/T 729-2005
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
QC/T 1005-2026 — Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive
QC/T 1022-2026 — Technical specifications and test methods of reduction gearbox for battery electric vehicles
QC/T 1041-2026 — Control system of fuel evaporative pollutants from Motorcycles with petrol engine
Secure payment via Stripe
Payments accepted
QC/T 729-2005
$105.00