QC/T 708-2004Technical specifications for automotive air conditioning blowers (English PDF)
汽车空调风机技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for QC/T 708-2004 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
March 12, 2004
Implementation date
August 1, 2004
Scope
QC/T 708-2004 is the English-translated version of 汽车空调风机技术条件.
QC/T 708-2004 is the Chinese standard "Technical specifications for automotive air conditioning blowers".
Its scope clause reads: This Standard specifies the terms and definitions, requirements, test methods, inspection rules as well as marking, packaging, storage and preservation of blower of air conditioner for motor vehicles (evaporator blower, condenser blower). This Standard is applicable to the blowers driving load to exhaust heat or remit cold air on air conditioning apparatus of automobile. Its clauses include terms and definitions; requirements.
Found what you need?
Document preview — QC/T 708-2004
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword I
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Requirements
- 5 Test Methods
- 6 Inspection Rules
- 7 Marking, Packaging, Storage and Preservation
1 Scope
This Standard specifies the terms and definitions, requirements, test methods, inspection rules as well as marking, packaging, storage and preservation of blower of air conditioner for motor vehicles (evaporator blower, condenser blower).
This Standard is applicable to the blowers driving load to exhaust heat or remit cold air on air conditioning apparatus of automobile.
2 Normative References
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrigendum contents) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this Standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
GB/T 1236 Industrial Fans - Performance Testing Using Standardized Airways
GB/T 2423.17 Basic Environmental Testing Procedures for Electric and Electronic Products - Test Ka: Salt Mist (eqv IEC 68-2-11:1988)
GB/T 4942.1 Classification of Degrees of Protection Provided by Enclosures of Rotating Electrical Machines (IP Code)
GB 18655 Limits and Methods of Measurement of Radio Disturbance Characteristics for the Protection of Receivers Used on Board Vehicles
QC/T 413-2002 Basic Specification for Automotive Electrical Equipment
QC/T 29106 Technical Specification of Automobile Wire Harness
3 Terms and Definitions
For the purpose of this standard, the following terms and definitions apply.
3.1 Rated current
The current of evaporator blower or condenser blower under the state of rated voltage, rated load and free ventilation.
3.2 Rated speed
The rotation speed of evaporator blower or condenser blower under the state of rated voltage, rated load and free ventilation
3.3 Pressure difference
The difference between static pressure static pressure at air inlet and total pressure at air outlet of evaporator blower or condenser blower
3.4 Flowrate
Flow of air volume of evaporator blower or condenser blower under pressure difference in per unit time .
3.5 Compressor blower and fan
The air driving assembly comprising of motor, fan blade and enclosure.
3.6 Evaporator blower
The fan driving fan blade to remit cold air of evaporator on automobile air conditioning apparatus.
3.7 Condenser blower
The fan driving fan blade to remit heat from condenser on automobile air conditioning apparatus
4 Requirements
4.1 General requirements for compressor blower and fan
4.1.1
General requirements for compressor blower and fan:
Compressor blower and fan shall meet requirements of this Standard, and shall be manufactured in accordance with the drawings and technical documents approved by specified procedures. The appearance, mounting dimension and marking of the compressor blower and fan shall meet the requirements of product drawing.
4.1.2
Normal working environment conditions of compressor blower and fan:
Normal working environment conditions of compressor blower and fan shall meet the requirements of 3.1.2 in QC/T 413-2002.
4.1.3
Operating ambient temperature range of compressor blower and fan:
4.1.3.1 Operating ambient temperature range of evaporator blower
-40 ~70°C.
4.1.3.2 Operating ambient temperature range of condenser blower
-40 ~85°C.
4.2 Fundamental performance parameter of compressor blower and fan
4.2.1
The following shall be specified in the product specifications of compressor blower and fan:
a) Rated current and rated speed;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download QC/T 708-2004
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
QC/T 1005-2026 — Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive
QC/T 1022-2026 — Technical specifications and test methods of reduction gearbox for battery electric vehicles
QC/T 1041-2026 — Control system of fuel evaporative pollutants from Motorcycles with petrol engine
QC/T 708-2004
$85.00