QC/T 636-2000Electric window regulators for automobiles (English PDF)

1 Scope

This standard specifies the technical requirements, test methods and inspection rules for electric window regulators of automobile.

This standard is applicable to rope wheel electric window regulators with a nominal voltage of 12 V, and may also serve as a reference for other types of electric window regulators (such as gear arm electric window regulators, flexible shaft electric window regulators, etc.).

2 Normative references

The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, all editions cited are valid. All standards are subject to revision, and all parties using this standard are encouraged to investigate the possibility of applying the latest editions of the following standards.

GB/T 2423.17-1981 Basic environmental testing procedures for electric and electronic products - Test Ka: Salt mist

GB/T 2828-1987 Sampling procedures and tables for lot-by-lot inspection by attributes (Apply to inspection of successive lots or batches)

GB/T 4942.2-1985 Degrees of protection provided by enclosures for low-voltage apparatus

QC/T 413-1999 Basic specifications for automotive electrical equipment

ISO 7637-1:1990 Road vehicles - Electrical disturbance by conduction and coupling - Part 1: Passenger cars and light commercial vehicles with nominal 12 V supply voltage - Electrical transient conduction along supply lines only

3 Definitions

For the purposes of this standard, the following definitions apply.