Valid

QC/T 631-2009Technical specifications and test methods for automotive exhaust silencer assemblies (English PDF)

汽车排气消声器总成技术条件和试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for QC/T 631-2009 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

November 17, 2009

Implementation date

April 1, 2010

Scope

QC/T 631-2009 is the English-translated version of 汽车排气消声器总成技术条件和试验方法.

QC/T 631-2009 is the Chinese automotive industry standard covering technical specifications and test methods for automotive exhaust silencer assemblies. It was issued on 17 November 2009 and has been in force since 1 April 2010, replacing QC/T 630-1999.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2009 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — QC/T 631-2009

National Standard of the People's Republic of China

Replacing
QC/T 630-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Brake performance
  • 1.2 Heat fade and recovery of brake
  • 1.3 Line failure and booster failure
  • 1.4 Wear of brake linings (pads)
  • 2 Normative references
  • 2.1 Terms
  • 3 Terms and definitions
  • 3.2 Abbreviations
  • 4 Technical requirements
  • 4.1 Arrangement form
  • 5 Test methods
  • 5.1 Protocol stack
  • 5.2 Node state
  • 5.3 Transmission rate
  • 5.4 Connectivity
  • 5.5 Bit error rate
  • 5.6 Wiring harness fault diagnosis
  • 5.7 Electrical indexes
  • 6 Inspection rules
  • 6.1 Test environment
  • 7 Marking, packaging, transport and storage

1 Foreword

QC/T 631-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 November 2009 and has been in force since 1 April 2010.

It replaces the earlier edition QC/T 631-1999.

The QC/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard specifies the terms and definitions, technical requirements, test methods, inspection rules as well as marking, packaging, transportation and storage of automotive exhaust muffler assembly. This standard is applicable to exhaust muffler assemblies for Category-M and -N motor vehicles.

QC/T 631-2009 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 1,612 other QC/T standards.

Of the 409 QC/T standards that do carry an ICS number, 397 (97%) fall under ICS 43, in the field of road vehicle engineering.

3 Normative references

GB/T 3785 — Electric, sonic properties and measuring methods for sound level meters

GB/T 3947 — Acoustical terminology

GB/T 15089-2001 — Classification of power-driven vehicles and trailers

GB/T 15173 — Sound calibrators

GB/T 18297-2001 — Performance test code for road vehicle engines

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

QC/T 631-2025 (later edition)

QC/T 631-1999 (earlier edition)

6 Classification and status

Chinese Standard Classification (CCS): T 13

Prefix QC/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of QC/T 631

EditionTitleRevisionStatus
QC/T 631-2009Technical specifications and test methods for automotive exhaust silencer assembliescurrent editionCurrent
QC/T 630-1999Technical specifications and test methods for automotive exhaust silencer assembliesprevious editionSuperseded

This page sells the current edition, QC/T 631-2009. Earlier editions are listed for reference only.

How to Download QC/T 631-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

QC/T 631-2009

$175.00