QB/T 4096.21-2011Performance of room heaters for household and similar purposes. Part 21: Particular requirements for convector heaters (English PDF)

Foreword

QB/T 4096 is the first part of the series of performance standards for household and

similar indoor heaters. It is a general requirement. This part is QB/T 4096.23-2011

Performance of room heaters for household and similar purposes - Part 21.Particular

requirements for convector heaters.

This Part should be used together with QB/T 4096-2010 Performance of room heaters

for household and similar purposes - Part 1.General requirements.

This part is formed by modification or addition of QB/T 4096-2010... Where it states

"applicable", it means that the corresponding provisions in QB 4096-2010 apply to this

part; where it states "replacement", it means that the provisions in this part shall prevail;

where is states "modification", it means that the modified content of the related

provisions in the corresponding clauses of QB/T 4096-2010 shall prevail, and the rest

content of the clause is still applicable; where it states "addition", it means that the

additional provisions in this part shall, at the same time, meet the related provisions in

QB/T 4096-2010.

The additional provisions of QB/T 4096 will be numbered from 101.

This Part was proposed by the China Light Industry Federation

This Part shall be under the jurisdiction of the National Household Electrical

Standardization Technical Committee (SAC/TC46).

Main drafting organizations of this Part. SINGFUN Group Co., Ltd., Ningbo SINGFUN

Electrical Manufacturing Co., Ltd., Guangdong Midea Environmental Electrical

Manufacturing Co., Ltd.

Drafting organizations of this Part. Shenzhen LIAN Industrial Co. Ltd., Emmett

(Shenzhen) Electric Co. Ltd., China Institute of Electrical Appliances, Ningbo Product

Quality Supervision and Inspection Institute, China Electrical Science Research

Institute, Zhejiang Quality and Technical Supervision and Inspection Institute,

Guangzhou Qi Kai Testing Technology Research Institute, National Infrared and

Industrial Electrothermal Products Quality Supervision and Inspection Center.

Main drafters of this Part. Fang Qinglian, Zhu Yongguo, Nie Yong, Ma Dejun, Tian

Hongtao, Luo Lizhen, Bao Jun, Xu Yanrong, Zhao Qi, Su Tao, Chen Yonghua, Zeng

Yu.

Performance of room heaters for household and similar purposes -

Part 21.Particular requirements for convector heaters

1 Scope

This chapter of QB/T 4096-2010 is replaced by the following contents.

This part specifies the terms and definition, product classification, requirements, testing

methods, inspection rules, as well as marking, packaging, transportation, storage of

convector heaters for household and similar purposes (hereinafter "heaters").

This part is applicable to heaters – for single-phase appliance, the rated-voltage is not

more than 250V; for other appliances, the rated-voltage is not more than 480V; the

heaters are used in household or similar venues. The heaters can be portable, fixed,

standing etc.

This part is not applicable to.

- Heaters installed in the structure of a building;

- Central heating system;

- Heaters connecting air ducts;

- Wallpaper, blanket, curtain or tube with flexible electric heating components;

- Household room heaters of thermal storage type;

- Bathroom electric heater (bathroom heat lamp fixture);

- Electrical oil heater.

2 Normative references

This chapter of QB/T 4096-2010 is applicable.

3 Terms and definitions

This chapter of QB/T 4096-2010 is applicable.

......