Valid

NB/T 31015-2011Manufacturing technical specification for converter of permanent magnet type wind turbine generator (English PDF)

永磁风力发电机变流器制造技术规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for NB/T 31015-2011 in 30 minutes.

Issued by

NEA

Level / Type

Industry · Recommended

Issue date

August 6, 2011

Implementation date

November 1, 2011

Scope

NB/T 31015-2011 is the English-translated version of 永磁风力发电机变流器制造技术规范.

NB/T 31015-2011 is the Chinese standard "Manufacturing technical specification for converter of permanent magnet type wind turbine generator".

Its scope clause reads: This standard specifies the terminologies and definitions, technical requirements, test methods and inspection rules of converter of permanent magnet wind turbine generator (hereinafter referred to as "converter") as well as the relevant information of its products, etc. This standard is applicable to the voltage source converter connecting with the stator winding of permanent magnet wind turbine generator. Its clauses include terminologies and definitions.

Found what you need?

Document preview — NB/T 31015-2011

National Standard of the People's Republic of China

Issued by: National Energy Administration of the People's Republic of China

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative References
  • 3 Terminologies and Definitions
  • 4 Technical Requirements
  • 4.1 Product Types and Main Parameters
  • 4.2 Service Conditions
  • 4.3 Performance Requirements
  • 5 Test Methods
  • 5.1 Test Platform
  • 5.2 Instruments and Equipment
  • 5.3 Inspection and Test
  • 6 Inspection Rules
  • 6.1 Category
  • 6.2 Test Implementation
  • 6.3 Test Items
  • 7 Marking, Packaging, Storage and Transportation
  • 7.1 Marking
  • 7.2 Packaging
  • 7.3 Storage
  • 7.4 Transportation

1 Scope

This standard specifies the terminologies and definitions, technical requirements, test methods and inspection rules of converter of permanent magnet wind turbine generator (hereinafter referred to as "converter") as well as the relevant information of its products, etc.

This standard is applicable to the voltage source converter connecting with the stator winding of permanent magnet wind turbine generator.

2 Normative References

The following documents for the application of this document are essential. For dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 191-2008 Packaging - Pictorial Marking for Handling of Goods

GB/T 2423.1-2008 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods Tests A: Cold

GB/T 2423.2-2008 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods - Tests B: Dry Heat

GB/T 2423.3-2006 Environmental Testing for Electric and Electronic Products - Part 2: Testing Methods - Test Cab: Damp Heat Steady State

GB/T 2423.4-2008 Basic Environmental Testing Procedures for Electric and Electronic Products - Part 2: Test Method - Test Db: Damp Heat, Cyclic ( 12h+12h cycle)

GB/T 2900.33-2004 Electrotoechnical Terminology - Power Electronics

GB/T 2900.53-2001 Electrotechnical Terminology - Wind Turbine Generator Systems

GB/T 3797-2005 Electrical Control Assemblies

GB/T 3859.1-1993 Semiconductor Convertors - Specification of Basic Requirements

GB 4208-2008 Degrees of Protection Provided by Enclosure (IP Code)

GB/T l2668.2-2002 Adjustable Speed Electrical Power Drive Systems - Part 2:General Requirements - Rating Specifications for Low Voltage Adjustable Frequency a.c. Power Drive Systems

GB/T 12668.3-2003 Adjustable Speed Electrical Power Dive Systems - Part 3: EMC Product Standard including Specific Test Methods

GB/T 13384-2008 General Specifications for Packing of Mechanical and Electrical Product

GB/T 13422-1992 Power Semiconductor Converters - Electrical Test Methods

GB 14048-2006 Low-voltage Switchgear and Controlgear - Part 1: General Rules

GB 18451.1-2001 Wind Turbine Generator Systems - Safety Requirements

GB/T 20320-2006 Measurement and Assessment of Power Quality Characteristics of Wind Turbine Generator System

GB/T 20626.1-2006 Special Environmental Condition - Electric and Electronic Products for Plateau - Part 1: General Technical Requirements

GB/T 20626.2-2006 Special Environmental Condition - Electric and Electronic Products for Plateau - Part 2: Selective Types and Testing Specification

GB/T 20626.3-2006 Special Environmental Condition - Electric and Electronic Products for Plateau - Part 3: Protection Requirement of Thunder and Lightning Filth Condensation

JB/T 5777.2-2002 General Specification for Control and Protection Panel (Cabinet, Desk) of Secondary Circuit of Power System

JB/T 5777.3-2002 Basic Testing Method for Control and Protection Panel (Cabinet, Desk) of Secondary Circuit of Power System

3 Terminologies and Definitions

For the purposes of this document, terminologies and definitions established in GB/T 3859.1-1993, GB/T 2900.33-2004 and GB/T 2900.53-2001 as well as the following ones apply.

3.1 Converter of permanent magnet wind turbine generator

The AC/DC voltage source static converter matching with permanent magnet wind turbine generator, connected between stator winding and line and used for transfer stator winding energy into line, it mainly consists of generator-side converter, DC link, line-side converter and its control system. Some types of energy may flow in both directions, while some may only flow toward line side.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download NB/T 31015-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

NB/T 31015-2011

$145.00