Valid

NB/T 31013-2011Manufacturing technical specification for double fed wind turbine generator (English PDF)

双馈风力发电机制造技术规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for NB/T 31013-2011 in 30 minutes.

Issued by

NEA

Level / Type

Industry · Recommended

Issue date

August 6, 2011

Implementation date

November 1, 2011

Scope

NB/T 31013-2011 is the English-translated version of 双馈风力发电机制造技术规范.

NB/T 31013-2011 is the Chinese energy industry standard covering manufacturing technical specification for double fed wind turbine generator. It was issued on 6 August 2011 and has been in force since 1 November 2011, as a first edition.

The document is under the responsibility of the National Energy Administration. This page is published from the official record of the 2011 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — NB/T 31013-2011

National Standard of the People's Republic of China

Issued by: National Energy Administration of the People's Republic of China

Contents

  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 4 Model, Structural Type, Main Parameter and Quota
  • 4.1 Model
  • 4.2 Structural Type
  • 4.3 Main Parameters
  • 4.4 Quota
  • 5 Technical Requirements
  • 5.1 Overview
  • 5.2 Operating Conditions
  • 5.3 General Performance
  • 5.4 Temperature Rise Limit
  • 5.5 Characteristic Requirements of the Generator
  • 5.6 Tolerance
  • 5.7 Efficiency
  • 5.8 Overspeed
  • 5.9 Collector Ring Device
  • 5.10 Shaft Current
  • 5.11 Overload Capacity
  • 5.12 Insulation Resistance
  • 5.13 Short-time Boosting Voltage
  • 5.14 Voltage Resistance
  • 5.15 Harmonic Wave
  • 5.16 Noise
  • 5.17 Vibration
  • 5.18 Mould-proof Performance
  • 5.19 Salt Mist
  • 5.20 Corrosion Resistance to Chemically Reactive Substance
  • 6 Test Methods
  • 6.1 Test Requirements and Preparation
  • 6.2 Test Items and Methods
  • 7 Inspection Rules
  • 7.1 Type test
  • 7.2 End-of-manufacturing Test
  • 7.3 Test Items
  • 8 Safety and Warning Sign
  • 9 Product Information
  • 9.1 Marking
  • 9.2 Document Equipment

1 Foreword

NB/T 31013-2011 was issued by National Energy Administration of the People's Republic of China on 6 August 2011 and has been in force since 1 November 2011.

This Standard specifies the type, technical requirements, safety and warning signs, product information, test method and inspection rules, package, transport and storage, warranty period etc. of brush-equipped double-fed wind turbine generator for grid-connected double feed wind turbine generator unit.

This Standard is applicable to brush-equipped double feed wind turbine generator for grid-connected double feed wind turbine generator unit (hereinafter referred to as "generator").

2 Scope Preview

NB/T 31013-2011 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 4,537 other NB/T standards.

Of the 1,959 NB/T standards that do carry an ICS number, 1,265 (65%) fall under ICS 27, in the field of energy and heat transfer engineering.

3 About this standard

Issued by: National Energy Administration of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other editions:

NB/T 31013-2019 (later edition)

Standards on related subjects:

GB/T 24625-2024 — Guide for the design and application of synchronous motors for converter supply

GB/T 15548-2023 — General specification for three-phase synchronous generators driven by reciprocating internal combustion engine

GB/T 22669-2008 — Test procedures for three-phase permanent magnet synchronous machines

NB/T 11855-2025 — Technical specifications for stator and rotor segmented design of wind turbine generators

NB/T 11791-2025 — Technical specification for integrating distributed condenser to power grid

NB/T 31012-2019 — Technical specification for permanent magnet type wind turbine generator

5 Classification and status

Prefix NB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download NB/T 31013-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

NB/T 31013-2011

$145.00