Valid

NB/T 20009.3-2010Welding Material for Pressurized Water Reactor Nuclear Power Plants - Part 3: Stainless Steel Covered Electrodes for Classes 1,2,3 Components (English PDF)

压水堆核电厂用焊接材料 第3部分:1、2、3级设备用不锈钢焊条

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for NB/T 20009.3-2010 in 30 minutes.

Issued by

NEA

Level / Type

Industry · Recommended

Issue date

May 1, 2010

Implementation date

October 1, 2010

Scope

NB/T 20009.3-2010 is the English-translated version of 压水堆核电厂用焊接材料 第3部分:1、2、3级设备用不锈钢焊条.

NB/T 20009.3-2010 is the Chinese standard "Welding Material for Pressurized Water Reactor Nuclear Power Plants - Part 3: Stainless Steel Covered Electrodes for Classes 1,2,3 Components".

Its scope clause reads: This part specifies the technical requirements, test methods and inspection rules of stainless steel covered electrodes for manual arc welding for Class 1, 2, 3 components of PWR nuclear power plants.

This part is applicable to E308L, E309L, E316L stainless steel covered electrodes for manual arc welding for Class 1, 2, 3 mechanical components of PWR nuclear power plants. Its clauses include model; technical requirements.

Found what you need?

Document preview — NB/T 20009.3-2010

National Standard of the People's Republic of China

Issued by: National Energy Administration of the People's Republic of China

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative references
  • 3 Model
  • 4 Technical requirements
  • 4.1 Dimension
  • 4.2 Coating
  • 4.3 T-joint fillet welds
  • 4.4 Chemical composition of deposited metal
  • 4.5 Mechanical properties of deposited metal (as-welded condition)
  • 4.6 Measurement of delta ferrite content in deposited metal
  • 4.7 Intergranular corrosion test of deposited metal
  • 4.8 Non-destructive testing of welds
  • 5 Test methods
  • 5.1 T-joint fillet welds
  • 5.2 Preparation of deposited metal test plate
  • 5.4 Mechanical property test of deposited metal
  • 5.5 Measurement of delta ferrite content in deposited metal
  • 5.6 Intergranular corrosion test of deposited metal
  • 5.7 Non-destructive testing of welds
  • 6 Inspection rules
  • 6.1 Classification of batches
  • 6.2 Sampling method of electrodes
  • 6.3 Acceptance
  • 6.4 Re-inspection
  • 7 Packaging, marking and quality certificate
  • 7.1 Packaging
  • 7.2 Marking
  • 7.3 Quality certificate
  • Annex A (Normative) Delong diagram

1 Scope

This part specifies the technical requirements, test methods and inspection rules of stainless steel covered electrodes for manual arc welding for Class 1, 2, 3 components of PWR nuclear power plants.

This part is applicable to E308L, E309L, E316L stainless steel covered electrodes for manual arc welding for Class 1, 2, 3 mechanical components of PWR nuclear power plants.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 223.3 Methods for chemical analysis of iron, steel and alloy - The diantipyryl methane phosphomolybdate gravimetric method for the determination of phosphorus content

GB/T 223.11 Iron steel and alloy - Determination of chromium content - Visual titration or potentiometric titration method (GB/T 223.11-2008, ISO 4937:1986, MOD)

GB/T 223.19 Methods for chemical analysis of iron steel and alloy - The neocuproine-chloroform extraction photometric method for the determination of copper content

GB/T 223.21 Methods for chemical analysis of iron, steel and alloy - The 5-CI-PADAB spectrophotometric method for the determination of cobalt content

GB/T 223.22 Methods for chemical analysis of iron, steel and alloy - The nitroso-R-salt spectrophotometric method for the determination of cobalt content

GB/T 223.25 Methods for chemical analysis of iron, steel and alloy - The dimethylglyoxime gravimetric method for the determination of nickel content

GB/T 223.26 Methods for chemical analysis of iron, steel and alloy - The thiocyanate direct photometric method for the determination of molybdenum content

GB/T 223.28 Methods for chemical analysis of iron steel and alloy - The alpha-benzoinoxime gravimetric method for the determination of molybdenum content

GB/T 223.36 Methods for chemical analysis of iron, steel and alloy - The neutral titration method for the determination of nitrogen content after distillation separation

GB/T 223.40 Methods for chemical analysis of iron, steel and alloy; The anion-exchange separation-sulphochlorophenol S photometric method for the determination of niobium content

GB/T 223.58 Methods for chemical analysis of iron, steel and alloy - The sodium arsenite-sodium nitrite titrimetric method for the determination of manganese content

GB/T 223.60 Methods for chemical analysis of iron, steel and alloy - The perchloric acid dehydration gravimetric method for the determination of silicon content

GB/T 223.61 Methods for chemical analysis of iron, steel and alloy - The ammonium phosphomolybdate volumetric method for the determination of phosphorus content

GB/T 223.63 Methods for chemical analysis of iron, steel and alloy - The sodium (potassium) periodate photometric method for the determination of manganese content

GB/T 223.64 Iron steel and alloyed - Determination of manganese content - Flame atomic absorption spectrometric method (GB/T 223.64-2008, ISO 10700:1994, IDT)

GB/T 223.68 Methods for chemical analysis of iron, steel and alloy - The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content

GB/T 223.72 Iron, steel and alloy - Determination of sulfur content - Gravimetric method

GB/T 223.78 Methods for chemical analysis of iron, steel and alloy - Curcumin spectrophotometric method for the determination of boron content (GB/T 223.78-2000, idt ISO 10153:1997)

GB/T 229 Metallic materials - Charpy pendulum impact test method (GB/T 229-2007, ISO 148-1:2006, MOD)

GB/T 983 Stainless steel covered electrodes

GB/T 2652 Tensile test methods on weld and deposited metal

GB/T 4334.5 Method of copper sulfate-sulfuric acid test for stainless steels

GB/T 4338 Metallic materials - Tensile testing at elevated temperature (GB/T 4338-2006, ISO 783:1999, MOD)

GB/T 11170 Method for photoelectric emission spectroscopic analysis of stainless steel

GB/T 20123 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (GB/T 20123-2006, ISO 5350:2000, IDT)

EJ/T 1027 Welding code for mechanical components of PWR nuclear islands

NB/T 20003.3 Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 3: Radiographic testing

NB/T 20003.4 Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 4: Penetrant testing

3 Model

The electrode models are E308L, E309L, and E316L.

Electrode manufacturers shall evaluate the electrode grades in accordance with the relevant provisions of EJ/T 1027.

4 Technical requirements

4.1 Dimension

The electrode dimension shall meet the requirements of Table 1.

The length of the holding end of the electrode shall meet the requirements of Table 2.

Table 1 Electrode dimension […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download NB/T 20009.3-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

NB/T 20009.3-2010

$165.00