NB/T 20009.13-2013Welding material for pressurized water reactor nuclear power plants - Part 13: Stainless steel strips and fluxes for cladding of classes 1, 2, 3 components (English PDF)
压水堆核电厂用焊接材料 第13部分:1、2、3级设备不锈钢堆焊用焊带和焊剂
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for NB/T 20009.13-2013 in 30 minutes.
Issued by
NEA
Level / Type
Industry · Recommended
Issue date
June 8, 2013
Implementation date
October 1, 2013
Scope
NB/T 20009.13-2013 is the English-translated version of 压水堆核电厂用焊接材料 第13部分:1、2、3级设备不锈钢堆焊用焊带和焊剂.
NB/T 20009.13-2013 is the Chinese standard "Welding material for pressurized water reactor nuclear power plants - Part 13: Stainless steel strips and fluxes for cladding of classes 1, 2, 3 components".
Its scope clause reads: This part specifies the model, technical requirements, test method and inspection rules of stainless steel strips and fluxes for cladding of class 1, 2, 3 components for pressurized water reactor nuclear power plants.
This part applies to EQ309L and EQ308L stainless steel strips and fluxes for cladding. Its clauses include model.
Found what you need?
Document preview — NB/T 20009.13-2013
National Standard of the People's Republic of China
- Replacing
- EJ/T 486-1999
Issued by: National Energy Administration of the People's Republic of China
Contents
- Foreword I
- 1 Scope
- 2 Normative references
- 3 Model
- 4 Technical requirements
- 5 Test methods
- 6 Inspection rules
- 7 Packaging, marking and quality certification
- Annex A (Normative) Delong diagram
1 Scope
This part specifies the model, technical requirements, test method and inspection rules of stainless steel strips and fluxes for cladding of class 1, 2, 3 components for pressurized water reactor nuclear power plants.
This part applies to EQ309L and EQ308L stainless steel strips and fluxes for cladding.
2 Normative references
The following standards contain provision which, through reference in this standard, constitute provisions of this standard. At the time of publication, all editions listed were valid. All normative references are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the normative standards indicated below.
GB/T 223.03 Methods for chemical analysis of iron, steel and alloy - The diantipyrylmethane phosphomolybdate gravimetric method for the determination of phosphorus content
GB/T 223.04 Alloyed steel - Determination of manganese content - Potentiometric or visual titration method
GB/T 223.05 Steel and iron - Determination of acid-soluble silicon and total silicon content - Reduced molybdosilicate spectrophotometric method (GB/T 223.05-2008, ISO 4829-1:1986, ISO 4829-2:1988, MOD)
GB/T 223.11 Iron, steel and alloy - Determination of chromium content - Visual titration or potentiometric titration method (GB/T 223.11-2008, ISO 4937:1986, MOD)
GB/T 223.18 Methods for chemical analysis of iron, steel and alloy - The sodium thiosulfate separation iodimetric method for the determination of copper content
GB/T 223.19 Methods for chemical analysis of iron, steel and alloy - The neocuproine-chloroform extraction photometric method for the determination of copper
GB/T 223.21 Methods for chemical analysis of iron, steel and alloy - The 5-CI-PADAB spectrophotometric method for the determination of cobalt content
GB/T 223.22 Methods for Chemical Analysis of Iron, Steel and Alloy-The Nitroso-R-salt Spectrophotometric Method for the Determination of Cobalt Content
GB/T 223.25 Methods for chemical analysis of iron, steel and alloy - The dimethylglyoxime gravimetric method for the determination of nickel content
GB/T 223.26 Iron, steel and alloy - Determination of molybdenum content - The thiocyanate spectrophotometric method
GB/T 223.36 Methods for chemical analysis of iron, steel and alloy - The neutral titration method for the determination of nitrogen content after distillation separation
GB/T 223.37 Methods for chemical analysis of iron, steel and alloy - The indophenol blue photometric methods for the determination of nitrogen content after distillation separation
GB/T 223.38 Methods for chemical analysis of iron, steel and alloy - The anion-exchange separation-gravimetric method for the determination of niobium content
GB/T 223.40 Iron, steel and alloy - Determination of niobium content by the sulphochlorophenol S spectrophotometric method
GB/T 223.59 Iron, steel and alloy - Determination of phosphorus content - Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method
GB/T 223.60 Methods for chemical analysis of iron, steel and alloy - The perchloric acid dehydration gravimetric method for the determination of silicon content
GB/T 223.61 Methods for chemical analysis of iron, steel and alloy - The ammonium phosphomolybdate volumetric method for the determination of phosphorus content
GB/T 223.62 Methods for chemical analysis of iron, steel and alloy - The butyl acetate extraction photometric method for the determination of phosphorus content
GB/T 223.63 Methods for chemical analysis of iron, steel and alloy - The sodium (potassium) periodate photometric method for the determination of manganese content
GB/T 223.64 Iron steel and alloyed - Determination of manganese content - Flame atomic absorption spectrometric method (GB/T 223.64-2008, ISO 10700:1994, IDT)
GB/T 223.65 Methods for chemical analysis of iron, steel and alloy - The flame atomic absorption spectrometric method for the determination of vanadium content
GB/T 223.67 Iron steel and alloy - Determination of sulfur content -Methylene blue spectrophotometric method (GB/T 223.67-2008, ISO 10701: 1994, IDT)
GB/T 223.68 Methods for chemical analysis of iron, steel and alloy - The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content
GB/T 223.72 Iron, steel and alloy - Determination of sulfur content - Gravimetric method
GB/T 223.79 Iron and steel - Determination of multi-element contents - X-ray fluorescence spectrometry
GB/T 223.85 Steel and iron - Determination of high sulfur content - Infrared absorption method after combustion in an induction furnace (GB/T 223.85-2009, ISO 13902:1989, IDT)
GB/T 223.86 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace (GB/T 223.86-2009, ISO 9556:1989, IDT)
GB/T 4334 Corrosion of metals and alloys - Test methods for intergranular corrosion of stainless steels (GB/T 4334-2008, ISO 3651-1: 1998. ISO 3651-2: 1998, MOD)
GB/T 25775 Technical delivery conditions for welding consumables - Type of product ,dimensions, tolerances and markings (GB/T 25775-2010, ISO 544: 2003, MOD)
GB/T 25778 Procurement guidelines for welding consumables (GB/T 25778-2010, ISO 14344: 2010, MOD)
NB/T 20002.4 Welding code for mechanical components of PWR nuclear islands - Part 4: Qualification of filler materials
NB/T 20003.2 Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 2: Ultrasonic testing
NB/T 20003.4 Non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 4: Penetrant testing
3 Model
3.1 Strips
The strips in this part are of Model EQ308L and EQ309L.
3.2 Strip / flux combinations
The strip / flux combinations in this part are classified based on the chemical compositions of deposited metal.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of NB/T 20009.13
| Edition | Title | Revision | Status |
|---|---|---|---|
| NB/T 20009.13-2013 | Welding material for pressurized water reactor nuclear power plants - Part 13: Stainless steel strips and fluxes for cladding of classes 1, 2, 3 components | current edition | Current |
| EJ/T 486-1999 | Welding material for pressurized water reactor nuclear power plants - Part 13: Stainless steel strips and fluxes for cladding of classes 1, 2, 3 components | previous edition | Superseded |
This page sells the current edition, NB/T 20009.13-2013. Earlier editions are listed for reference only.
How to Download NB/T 20009.13-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
NB/T 20009.14-2013 — Welding material for pressurized water reactor nuclear power plants - Part 14: Hard facing welding consumables for classes 1, 2, 3 components
NB/T 20009.12-2013 — Welding materials for pressurized water reactor nuclear power plants - Part 12: Nickel-based alloy strip cladding with flux for class 1 components
NB/T 20009.22-2015 — Welding material for pressurized water reactor nuclear power plants - Part 22: Low alloy covered electrodes for safety-related components
NB/T 20009.13-2013
$309.00