NB/T 20009.1-2010Welding Material for Pressurized Water Reactor Nuclear Power Plants - Part 1: Carbon Steel Covered Electrodes for Classes 1, 2, 3 Components (English PDF)
压水堆核电厂用焊接材料 第1部分:1、2、3级设备用碳钢焊条
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for NB/T 20009.1-2010 in 30 minutes.
Issued by
NEA
Level / Type
Industry · Recommended
Issue date
May 1, 2010
Implementation date
October 1, 2010
Scope
NB/T 20009.1-2010 is the English-translated version of 压水堆核电厂用焊接材料 第1部分:1、2、3级设备用碳钢焊条.
NB/T 20009.1-2010 is the Chinese standard "Welding Material for Pressurized Water Reactor Nuclear Power Plants - Part 1: Carbon Steel Covered Electrodes for Classes 1, 2, 3 Components".
Its scope clause reads: This part specifies the models, technical requirements, test methods, inspection rules, etc. of carbon steel covered electrodes for Class 1, 2, 3 components of pressurized water reactor nuclear power plant.
This part is applicable to carbon steel electrodes for manual arc welding of Class 1, 2, 3 components (including container, heat exchanger, pump, pipeline, containment steel liner, etc.) of pressurized water reactor nuclear power plant. Its clauses include models.
Found what you need?
Document preview — NB/T 20009.1-2010
National Standard of the People's Republic of China
Issued by: National Energy Administration of the People's Republic of China
Contents
- Foreword I
- 1 Scope
- 2 Normative References
- 3 Models
- 4 Technical Requirements
- 4.1 Dimension
- 4.2 Coating
- 4.3 T-fillet Weld
- 4.4 Chemical Composition of Deposited Metal
- 4.5 Mechanical Performance of Deposited Metal (As-welded or/and Simulated Stress-relief Heat Treatment State)
- 4.6 Radiographic Testing for Weld
- 4.7 Water Content of Coating
- 4.8 Diffusible Hydrogen Content of Deposited Metal
- 5 Test Methods
- 5.1 T-fillet Weld Test
- 5.2 Chemical Compositions and Mechanical Performance Test of Deposited Metal
- 5.3 Radiographic Testing for Weld
- 5.4 Determination of Water Content of Coating
- 5.5 Determination of Diffusible Hydrogen Content in Deposited Metal
- 6 Inspection Rules
- 6.1 Batch Division
- 6.2 Sampling Method for Electrode
- 6.3 Acceptance
- 6.4 Re-inspection
- 7 Packaging, Marking and Quality Certificate
- 7.1 Packaging
- 7.2 Marking
- 7.3 Quality Certificate
1 Scope
This part specifies the models, technical requirements, test methods, inspection rules, etc. of carbon steel covered electrodes for Class 1, 2, 3 components of pressurized water reactor nuclear power plant.
This part is applicable to carbon steel electrodes for manual arc welding of Class 1, 2, 3 components (including container, heat exchanger, pump, pipeline, containment steel liner, etc.) of pressurized water reactor nuclear power plant.
2 Normative References
The following documents are indispensable for the application of this document. For dated references, only the dated editions apply. For undated references, the latest editions (including any amendments) apply.
GB/T 223.3 Methods for Chemical Analysis of Iron, Steel and Alloy - The Diantipyryl Methane Phosphomolybdate Gravimetric Method for the Determination of Phosphorus Content
GB/T 223.11 Iron Steel and Alloy - Determination of Chromium Content - Visual Titration or Potentiometric Titration Method (GB/T 223.11-2008, ISO 4937:1986, MOD)
GB/T 223.12 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Carbonate Separation - Diphenyl Carbazide Photometric Method for the Determination of Chromium Content
GB/T 223.14 Methods for Chemical Analysis of Iron, Steel and Alloy - The N-benzoy-N-phenylhydroxylamine Extraction Photometric Method for the Determination of Vanadium Content
GB/T 223.18 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Thiosulfate Separation Iodimetric Method for the Determination of Copper Content
GB/T 223.19 Methods for Chemical Analysis of Iron, Steel and Alloy - The Neocuproine-chloroform Extraction Photometric Method for the Determination of Copper Content
GB/T 223.23 Methods for Chemical Analysis of Iron, Steel and Alloy - The Dimethylglyoxime Spectrophotometric Method for the Determination of Nickel Content
GB/T 223.24 Methods for Chemical Analysis of Iron, Steel and Alloy - The Extraction Separation - The Dimethylglyoxime Spectrophotometric Method for the Determination of Nickel Content
GB/T 223.26 Methods for Chemical Analysis of Iron, Steel and Alloy - The Thiocyanate Direct Photometric Method for the Determination of Molybdenum Content
GB/T 223.53 Methods for Chemical Analysis of Iron, Steel and Alloy - The Flame Atomic Absorption Spectrophotometric Method for the Determination of Copper Content (GB/T 223.53-1987, eqv ISO/DIS 4943:1986)
GB/T 223.54 Methods for Chemical Analysis of Iron, Steel and Alloy - The Flame Atomic Absorption Spectrophotometric Method for the Determination of Nickel Content (GB/T 223.54-1987, eqv ISO/DIS 4940:1986)
GB/T 223.58 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Arsenite - Sodium Nitrite Titrimetric Method for the Determination of Manganese Content
GB/T 223.59 Methods for Chemical Analysis of Iron, Steel and Alloy - The Reduced Molybdoantimonyl Phosphoric Acid Photometric Method for the Determination of Phosphorus Content
GB/T 223.60 Methods for Chemical Analysis of Iron, Steel and Alloy - The Perchloric Acid Dehydration Gravimetric Method for the Determination of Silicon Content
GB/T 223.61 Methods for Chemical Analysis of Iron, Steel and Alloy - The Ammonium Phosphomolybdate Volumetric Method for the Determination of Phosphorus Content
GB/T 223.62 Methods for Chemical Analysis of Iron, Steel and Alloy - The Butyl Acetate Extraction Photometric Method for the Determination of Phosphorus Content
GB/T 223.63 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium (Potassium) Periodate Photometric Method for the Determination of Manganese Content
GB/T 223.64 Iron Steel and Alloy - Determination of Manganese Content - Flame Atomic Absorption Spectrometric Method (GB/T 223.64-2008, ISO 10700:1994, IDT)
GB/T 223.67 Iron Steel and Alloy - Determination of Sulfur Content - Methylene Blue Spectrophotometric Method (GB/T 223.67-2008, ISO 10701:1994, IDT)
GB/T 223.68 Methods for Chemical Analysis of Iron, Steel and Alloy - The Potassium Iodate Titration Method after Combustion in the Pipe Furnace for the Determination of Sulfur Content
GB/T 223.72 Methods for Chemical Analysis of Iron, Steel and Alloy - The Alumina Chromatographic Separation - Barium Sulfate Gravimetric Method for the Determination of Sulphur Content
GB/T 2650 Impact Test Methods on Welded Joints (GB/T 2650-2008, ISO 9016:2001, IDT)
GB/T 2652 Tensile Test Methods on Weld and Deposited Metal (GB/T 2652-2008, ISO 5178:2001, IDT)
GB/T 3965 Methods for Determination of Diffusible Hydrogen in Deposited Metal
GB/T 4336 Standard Test Method for Spark Discharge Atomic Emission - Spectrometric Analysis of Carbon and Low-alloy Steel (Routine Method)
GB/T 4338 Metallic Materials - Tensile Testing at Elevated Temperature (GB/T 4338-2006, ISO 783:1999, MOD)
GB/T 5117 Carbon Steel Covered Electrodes
GB/T 20123 Steel and Iron - Determination of Total Carbon and Sulfur Content - Infrared Absorption Method after Combustion in an Induction Furnace (GB/T 20123-2006, ISO 15350:2000, IDT)
EJ/T l027 Welding Code for Mechanical Components of PWR Nuclear Islands
NB/T 20003.3 Non-destructive Testing for Mechanical Components in Nuclear Island of Nuclear Power Plants - Part 3: Radiographic Testing
3 Models
Electrode models include E4315, E5015 and E5018. Generally, E4315 is used for the welding of 420MPa carbon steel; E5015 and E5018 are used for the welding of 490MPa carbon steel.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download NB/T 20009.1-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
NB/T 20009.2-2021 — Welding consumables for pressurized water reactor nuclear power plants - Part 2: Low alloy steel electrodes
NB/T 20009.2-2010 — Welding Material for Pressurized Water Reactor Nuclear Power Plants - Part 2: Low Alloy Steel Covered Electrodes for Classes 1, 2, 3, Components
NB/T 20009.3-2021 — Welding consumables for pressurized water reactor nuclear power plants - Part 3: Stainless steel welding rods
NB/T 20009.1-2010
$105.00