Valid

NB/T 20007.6-2012Stainless Steel for Pressurized Water Reactor Nuclear Power Plants - Part 6: Controlled Nitrogen Content Austenitic Stainless Steel Plate for Reactor Internal (English PDF)

压水堆核电厂用不锈钢 第6部分:堆内构件用控氮奥氏体不锈钢板

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for NB/T 20007.6-2012 in 30 minutes.

Issued by

NEA

Level / Type

Industry · Recommended

Issue date

January 6, 2012

Implementation date

April 6, 2012

Scope

NB/T 20007.6-2012 is the English-translated version of 压水堆核电厂用不锈钢 第6部分:堆内构件用控氮奥氏体不锈钢板.

NB/T 20007.6-2012 is the Chinese energy industry standard covering stainless Steel for Pressurized Water Reactor Nuclear Power Plants, Part 6: Controlled Nitrogen Content Austenitic Stainless Steel Plate for Reactor Internal.

It was issued on 6 January 2012 and has been in force since 6 April 2012, as a first edition. The document is under the responsibility of the National Energy Administration.

This page is published from the official record of the 2012 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — NB/T 20007.6-2012

National Standard of the People's Republic of China

Issued by: National Energy Administration of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 General requirements
  • 4.1 Environmental conditions
  • 4.2 Basic principles
  • 4.3 Basic process
  • 5 Technical Requirements
  • 6 Test methods
  • 7 Inspection Rules
  • 8 Marking, packaging, transportation and storage
  • 9 Evaluation indicators

1 Foreword

NB/T 20007.6-2012 was issued by National Energy Administration of the People's Republic of China on 6 January 2012 and has been in force since 6 April 2012.

It is one of 76 parts of the NB/T 20007 series.

The NB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

NB/T 20007.6-2012 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 4,537 other NB/T standards.

Of the 1,959 NB/T standards that do carry an ICS number, 1,265 (65%) fall under ICS 27, in the field of energy and heat transfer engineering.

3 About this standard

Issued by: National Energy Administration of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other parts of this standard:

NB/T 20007.1-2010 — Part 1: Classes 1, 2 and 3 Austenitic Stainless Steel Forgings

NB/T 20007.1-2021 — Stainless steel for pressurized water reactor nuclear power plants - Part 1: Class 1, 2 and 3 austenitic stainless steel forgings

NB/T 20007.1-2024 — Stainless steel for pressurized water reactor nuclear power plants - Part 1: Austenitic stainless steel forgings for level 1, 2, and 3 equipment

NB/T 20007.2-2012 — Part 2: Austenitic Stainless Steel Forgings for Classes 2 and 3 Tube Plates of Heat Exchanger

NB/T 20007.2-2021 — Stainless steel for pressurized water reactor of nuclear power plants - Part 2: Austenitic stainless steel forgings for class 2 and 3 tube plates of heat exchanger

NB/T 20007.3-2012 — Part 3: Controlled Nitrogen Content Austenitic Stainless Steel Forgings for Core Upports and Upper Support Plates

NB/T 20007.3-2021 — Stainless steel for pressurized water reactor nuclear power plants - Part 3: Controlled nitrogen content austenitic stainless steel forgings for core supports and upper support plates

NB/T 20007.4-2012 — Part 4: Niobium Stabilized Austenitic Stainless Steel Forgings for the Shafts of Reactor Coolant Pumps

NB/T 20007.5-2010 — Part 5: Classes 1, 2, 3 Austenitic Stainless Steel Plates

NB/T 20007.5-2021 — Stainless steel for pressurized water reactor nuclear power plants - Part 5: Class 1, 2, 3 austenitic stainless steel plates

NB/T 20007.5-2024 — Stainless steel for pressurized water reactor nuclear power plants - Part 5: Austenitic stainless steel plates for level 1, 2 and 3 equipment

NB/T 20007.7-2012 — Part 7: Austenitic Stainless Steel Plate and Strip for Classes S1 and S2 Supports

NB/T 20007.8-2010 — Part 8: Class 1, 2, 3 Austenitic Stainless Steel Seamless Pipes

NB/T 20007.8-2017 — Stainless steel for pressurized water reactor nuclear power plants - Part 8: Class 1, 2 and 3 austenitic stainless steel seamless pipes

NB/T 20007.8-2024 — Stainless steel for pressurized water reactor nuclear power plants - Part 8: Austenitic stainless steel seamless pipes for level 1, 2 and 3 equipment

NB/T 20007.9-2011 — Stainless steel for pressurized water reactor nuclear power plants - Part 9: Classes 1, 2, 3 austenitic stainless steel seamless butt-welding fittings

NB/T 20007.9-2019 — Stainless steel for pressurized water reactor nuclear power plants Part 9: Butt-welded seamless pipe fittings of grade 1, 2, and 3 austenitic stainless steel

NB/T 20007.10-2013 — Power Plants - Part 10: Cold Rolled or Cold Drawn Seamless Austenitic Stainless Steel Tubes for Classes 2 and 3 Heat Exchangers

NB/T 20007.10-2019 — Stainless steel for pressurized water reactor nuclear power plants Part 10: Cold-rolled and cold-drawn austenitic stainless steel seamless steel tubes for heat transfer tubes of Class 2 and 3 heat exchangers

NB/T 20007.10-2024 — Stainless steel for pressurized water reactor nuclear power plants - Part 10: Austenitic stainless steel seamless tubes for 1st, 2nd and 3rd stage heat exchangers

NB/T 20007.11-2013 — Power Plants - Part 11: Classes 1, 2 and 3 Austenitic Stainless Steel Pipes Welded with the Addition of Filler Metal

NB/T 20007.11-2019 — Stainless steel for pressurized water reactor nuclear power plants Part 11: Grade 1, 2, and 3 austenitic stainless steel pipes welded with filler metals

NB/T 20007.12-2013 — Power Plants - Part 12: Classes 1, 2 and 3 Austenitic Stainless Steel Fittings Welded with the Addition of Filler Metal

NB/T 20007.12-2019 — Stainless steel for pressurized water reactor nuclear power plants Part 12: Butt-welded stainless steel pipe fittings of grade 1, 2, and 3 welded with filler metals

NB/T 20007.13-2012 — Part 13: Forged Tubes and Elbows Made from Controlled Nitrogen Austenitic Stainless Steel for Reactor Coolant Piping

NB/T 20007.14-2010 — Part 14: Classes 1, 2, 3 Austenitic Stainless Steel Forged or Rolled Bars

NB/T 20007.14-2021 — Stainless steel for pressurized water reactor nuclear power plants - Part 14: Class 1, 2, 3 austenitic stainless steel forged or rolled bars

NB/T 20007.14-2024 — Stainless steel for pressurized water reactor nuclear power plants - Part 14: Austenitic stainless steel bars and shapes for level 1, 2 and 3 equipment

NB/T 20007.15-2012 — Stainless steel for pressurized water reactor nuclear power plants - Part 15: Strain hardened hot worked rolled or forged austenitic stainless steel bars for bolting material of reactor internals

NB/T 20007.15-2024 — Stainless steel for pressurized water reactor nuclear power plants - Part 15: Cold work hardened austenitic stainless steel bars for fasteners of reactor internals and core measurement seal assemblies

NB/T 20007.16-2012 — Part 16: Classes 2 and 3 Martensitic Stainless Steel Forgings

NB/T 20007.16-2021 — Stainless steel for pressurized water reactor nuclear power plants - Part 16: Class 2 and 3 martensitic stainless steel forgings

NB/T 20007.17-2012 — Part 17: Martensitic Stainless Steel Forgings Used for Internal Hold Down Springs

NB/T 20007.17-2021 — Stainless steel for pressurized water reactor nuclear power plants - Part 17: Martensitic stainless steel forgings used for internal hold down springs

NB/T 20007.18-2012 — Part 18: Rolled or Forged Martensitic Stainless Steel Parts for Classes 2 and 3 Auxiliary Pump Drive Shafts

NB/T 20007.19-2013 — Stainless steel for pressurized water reactor nuclear power plants - Part 19: Classes 1, 2 and 3 pressure-retaining martensitic stainless steel castings

NB/T 20007.19-2021 — Stainless steel for pressurized water reactor nuclear power plants - Part 19: Class 1, 2 and 3 pressure-retaining martensitic stainless steel castings

NB/T 20007.20-2013 — Stainless steel for pressurized water reactor nuclear power plants - Part 20: Martensitic stainless steel for non-pressure-retaining internal category A, B and C parts of pumps

NB/T 20007.20-2019 — Stainless steel for pressurized water reactor nuclear power plants Part 20: Martensitic stainless steel for pumps Class A, B, C non-pressure casting internals

NB/T 20007.21-2012 — Part 21: Martensitic Stainless Steel Plates for Use in Making Steam Generator Tube Support Plates

NB/T 20007.22-2012 — Part 22: Seamless Pipes Made from Martensitic Stainless Steel for Drive Rods of Reactor Control Rod Drive Mechanisms

NB/T 20007.23-2013 — Part 23: Classes 1, 2 and 3 Pressure-retaining Austenitic-ferritic Stainless Steel Castings

NB/T 20007.23-2021 — Stainless steel for pressurized water reactor nuclear power plants - Part 23: Class 1, 2 and 3 pressure-retaining austenitic-ferritic stainless steel castings

NB/T 20007.24-2013 — Stainless steel for pressurized water reactor nuclear power plants - Part 24: Pressure-retaining austenitic-ferritic stainless steel castings for reactor coolant pump casings

NB/T 20007.25-2013 — Stainless steel for pressurized water reactor nuclear power plants - Part 25: Chromium-nickel austenitic-ferritic stainless steel containing no molybdenum for non-pressure-retaining cast internal pump parts of category A, B and C

NB/T 20007.25-2021 — Stainless steel for pressurized water reactor nuclear power plants - Part 25: Austenitic-ferritic stainless steel non-pressure-retaining cast internal parts of category A, B and C for pumps

NB/T 20007.26-2012 — Part 26: Austenitic-ferritic Stainless Steel Centrifugally Cast Pipes for Reactor Coolant Piping

NB/T 20007.27-2013 — Stainless steel for pressurized water reactor nuclear power plants - Part 27: Cast elbows and inclined nozzles made from austenitic-ferritic stainless steel for reactor coolant piping

NB/T 20007.28-2014 — Stainless steel for pressurized water reactor nuclear power plants - Part 28: Class 3 pressure-retaining austenitic-ferritic (duplex) stainless steel castings for seawater application

NB/T 20007.29-2014 — Stainless steel for pressurized water reactor nuclear power plants - Part 29: Non-pressure-retaining category A, B and C austenitic-ferritic duplex stainless steel castings for pumps

NB/T 20007.31-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 31: 022Cr19Ni10 stainless steel forgings used for containment vessel

NB/T 20007.32-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 32: 022Cr19Ni10 stainless steel seamless pipes for containment vessel

NB/T 20007.33-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 33: 015Cr17Ni12Mo2N stainless steel forged pipes for reactor coolant piping

NB/T 20007.34-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 34: 03Cr22Mn5Ni2MoCuN duplex stainless steel plates for modules

NB/T 20007.35-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 35: 06Cr18Ni11Ti stainless steel plates used for containment vessel mechanical penetrations

NB/T 20007.36-2015 — Stainless steel for pressurized water reactor nuclear power plant - Part 36: Austenitic stainless steel forged bars used for pressure-retaining components of CRDM

NB/T 20007.37-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 37: Austenitic stainless steel bars used for non-pressure-retaining components of CRDM

NB/T 20007.38-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 38: Austenitic stainless steel bars used for locking screw of CRDM

NB/T 20007.39-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 39: Martensitic stainless steel bars used for drive rod of CRDM

NB/T 20007.40-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 40: austenitic stainless steel forgings used for reactor vessel internals

NB/T 20007.41-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 41: austenitic stainless steel seamless pipes used for reactor vessel internals

NB/T 20007.42-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 42: precipitation-hardening stainless steel bars for reactor vessel internals

NB/T 20007.43-2016 — Stainless steel for pressurized water reactor nuclear power plants - Part 43: 022Cr17Ni12Mo2N austenitic stainless steel forgings used for nozzles for reactor coolant piping

NB/T 20007.44-2016 — Stainless steel for pressurized water reactor nuclear power plants - Part 44: 015Cr17Ni12Mo2N austenitic stainless steel pipes for surge line pipe spool pieces

NB/T 20007.45-2016 — Stainless steel for pressurized water reactor nuclear power plants - Part 45: 04Cr13Ni5Mo martensitic stainless steel forgings for hold-down springs

NB/T 20007.45-2017 — Stainless steel far pressurized water reactpr nuclear power plant. Part 45: 04Cr13Ni5Mo martensitic stainless steel for hold-down spring

NB/T 20007.46-2017 — Stainless steel for pressurized water reactor nuclear power plants - Part 46: 06Cr13Al stainless steel plates used for steam generator

NB/T 20007.47-2017 — Stainless steel for pressurized water reactor nuclear power plant - Part 47: 06Cr13Al stainless steel bars used for steam generator

NB/T 20007.48-2017 — Stainless steel for pressurized water reactor nuclear power plants - Part 48: Stainless steel bars for fasteners of nuclear safety related equipment

NB/T 20007.49-2018 — Stainless steel for pressurized water reactor nuclear power plants - Part 49: Strain-hardened stainless steel bars for safety class components

NB/T 20007.50-2018 — Stainless steel for pressurized water reactor nuclear power plants - Part 50: Austenitic stainless steel forgings for nuclear safety related components

NB/T 20007.51-2018 — Stainless steel for pressurized water reactor nuclear power plants - Part 51: Austenitic stainless steel plates for nuclear safety related components

NB/T 20007.52-2018 — Stainless steel for pressurized water reactor nuclear power plants - Part 52: Austenitic stainless steel bars and sections for safety related components

NB/T 20007.53-2019 — Stainless steel for pressurized water reactor nuclear power plants Part 53: Austenitic stainless steel seamless steel tubes for safety grade equipment

NB/T 20007.54-2019 — Stainless steel for pressurized water reactor nuclear power plants Part 54: Austenitic stainless steel seamless heat exchange tubes for safety equipment

Other editions:

NB/T 20007.6-2024 (later edition)

Standards on related subjects:

GB/T 19879-2023 — Steel plate for building structure

GB/T 20564.1-2017 — Continuously cold-rolled high strength steel sheet and strip for automobiles - Part 1: Bake hardening steel

GB/T 20564.10-2017 — Continuously cold-rolled high strength steel sheet and strip for automobiles - Part 10: Twinning induced plasticity steel

5 Classification and status

Chinese Standard Classification (CCS): H 46

Prefix NB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download NB/T 20007.6-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

NB/T 20007.6-2012

$135.00