NB/T 11025-2022Stiffening ring (English PDF)
补强圈
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for NB/T 11025-2022 in 30 minutes.
Issued by
NEA
Level / Type
Industry · Recommended
Issue date
November 4, 2022
Implementation date
May 4, 2023
Scope
NB/T 11025-2022 is the English-translated version of 补强圈.
NB/T 11025-2022 is the Chinese standard "Stiffening ring". Its scope clause reads: This document specifies the requirements for materials, types, and dimensions, as well as fabrication and inspection of reinforcing pads for the reinforcement of openings in the shells of pressure vessels.
The reinforcing pads specified in this document are used for structures where the openings in the shell of the pressure vessel are reinforced with reinforcing pads, and the structure with reinforcing pads for reinforcement shall be selected in accordance with those specified in GB/T 150.3.
This document is not recommended for vessels made of chromium-molybdenum steel, nor is it recommended for vessels that are designed to store substances with extreme or high toxicity hazards.
This document is not applicable to vessels that are subjected to fatigue loads. Its clauses include symbols; types and dimensions.
Found what you need?
Document preview — NB/T 11025-2022
National Standard of the People's Republic of China
- Replacing
- JB/T 4736-2002
Issued by: National Energy Administration of the People's Republic of China
Contents
- Foreword iii
- 1 Scope
- 2 Normative references
- 3 Symbols
- 4 Types and dimensions
- 5 Technical requirements
- 6 Designation
- Annex A (Informative) Dimension series and weight of steel reinforcing pads
- Annex B (Informative) Types and application scope of welded joints for reinforcing pads
- Annex C (Informative) Density of materials commonly used for reinforcing pads
1 Scope
1.1
This document specifies the requirements for materials, types, and dimensions, as well as fabrication and inspection of reinforcing pads for the reinforcement of openings in the shells of pressure vessels.
1.2
The reinforcing pads specified in this document are used for structures where the openings in the shell of the pressure vessel are reinforced with reinforcing pads, and the structure with reinforcing pads for reinforcement shall be selected in accordance with those specified in GB/T 150.3.
1.3
This document is not recommended for vessels made of chromium-molybdenum steel, nor is it recommended for vessels that are designed to store substances with extreme or high toxicity hazards.
1.4
This document is not applicable to vessels that are subjected to fatigue loads.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 150.2 Pressure Vessels - Part 2: Materials
GB/T 150.3 Pressure vessels - Part 3: Design
GB/T 150.4 Pressure vessels - Part 4: Fabrication, inspection and testing, and acceptance
GB/T 196 General purpose metric screw threads - Basic dimensions
GB/T 197-2018 General purpose metric screw threads - Tolerances
GB/T 1804-2000 General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
JB/T 4734 Aluminium welded vessels
JB/T 4745 Titanium welded vessels
JB/T 4755 Copper pressure vessels
JB/T 4756 Nickel and nickel alloy pressure vessels
NB/T 47011 Zirconium pressure vessels
NB/T 47013.3 Nondestructive testing of pressure equipment - Part 3: Ultrasonic testing
NB/T 47013.4 Nondestructive testing of pressure equipment - Part 4: Magnetic particle testing
NB/T 47013.5 Nondestructive testing of pressure equipment - Part 5: Penetrant testing
NB/T 47014 Welding procedure qualification for pressure equipment
3 Symbols
D1 - - the inside diameter of reinforcing pad, mm
D2 - - the outside diameter of reinforcing pad, mm;
dN - - the nominal diameter of the nozzle, mm;
do - - the outside diameter of the nozzle, mm;
deltac - - the thickness of reinforcing pad, mm;
deltan - - the nominal thickness at the opening of the shell, mm;
deltant - - the nominal thickness of the nozzle, mm.
4 Types and dimensions
4.1 Bevel type
4.1.1
According to the requirements for the welded joint structure of the reinforcing pad, the bevel of the reinforcing pad can be divided into Types A, B, C, D, and E (see Figure 1). In addition to the types shown in Figure 1, the designers may customize the bevel type of the reinforcing pad according to the structural requirements.
Figure 1 Bevel types for reinforcing pads 4.1.2 The applicable conditions for different types of bevels are as follows:
a) Type A is applicable to fillet welded structures where the shell is internally beveled;
b) Type B is applicable to partial-penetration structures where the shell is internally beveled;
c) Type C is applicable to full-penetration structures where the shell is externally beveled;
d) Type D is applicable to full-penetration structures where the shell is internally beveled;
e) Type E is applicable to full-penetration structures where the shell is internally beveled.
4.2 Dimensions
For steel reinforcing pads, it's advised to determine both their dimension series and weights as per Annex A, Table A.1. For reinforcing pads made of non-ferrous metals, their dimension series shall be determined with reference to Table A.1, with their weights converted based on the densities of the materials selected.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Editions of NB/T 11025
| Edition | Title | Revision | Status |
|---|---|---|---|
| NB/T 11025-2022 | Stiffening ring | current edition | Current |
| JB/T 4736-2002 | Stiffening ring | previous edition | Superseded |
This page sells the current edition, NB/T 11025-2022. Earlier editions are listed for reference only.
How to Download NB/T 11025-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
NB/T 10186-2026 — Technical specification for power conversion equipment used in photovoltaic-storage systems
NB/T 11969-2026 — Guide for energy efficiency assessment of off-board conductive chargers for electric vehicles
NB/T 11970-2026 — Specification for operation safety evaluation of grid-connected electric vehicle charging facilities
NB/T 11025-2022
$105.00