NB/SH/T 0954-2026Standard test method for apparent bulk density of catalytic cracking catalysts (English PDF)
催化裂化催化剂表观松密度的测定
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for NB/SH/T 0954-2026 in 30 minutes.
Issued by
National Energy Administration
Level / Type
Industry · Recommended
Issue date
December 27, 2017
Implementation date
June 1, 2018
Scope
NB/SH/T 0954-2026 is the English-translated version of 催化裂化催化剂表观松密度的测定.
NB/SH/T 0954-2026 is the Chinese standard "Standard test method for apparent bulk density of catalytic cracking catalysts". This standard specifies a method for determining the apparent bulk density of a catalytic cracking catalyst.
This standard applies to catalytic cracking catalysts, catalytic cracking catalysts and additives. The applicable measurement range is from 0.6 g/mL to 0.9 g/mL, and the method can also be applied to the apparent bulk density measurement in which the application range exceeds this range, but the precision has not been examined.
It was issued by National Energy Administration. Issued on 2017-12-27, in force from 2018-06-01. It cites 3 other standards.
Found what you need?
Document preview — NB/SH/T 0954-2026
National Standard of the People's Republic of China
- ICS
- 71.100.99
- Classification
- G74
Issued by: National Energy Administration
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Terms and Definitions
- 4 Overview
- 4.1 General requirements
- 5 Technical Requirements
- 6 Calibration conditions
- 6.1 Environmental conditions
- 6.2 Measurement standards and other equipment
- 7 Calibration items and calibration methods
- 7.1 Calibration Items
- 7.2 Calibration method
- 8 Expression of calibration results
- 9 Recalibration interval
1 Foreword
NB/SH/T 0954-2026 was issued by National Energy Administration on 27 December 2017 and has been in force since 1 June 2018.
The NB/SH/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 8 pages in English translation.
2 Scope Preview
This standard specifies a method for determining the apparent bulk density of a catalytic cracking catalyst. This standard applies to catalytic cracking catalysts, catalytic cracking catalysts and additives. The applicable measurement range is from 0.6 g/mL to 0.9 g/mL, and the method can also be applied to the apparent bulk density measurement in which the application range exceeds this range, but the precision has not been examined.
NB/SH/T 0954-2026 falls under ICS 71.100.99, in the field of chemical technology.
This catalogue holds 2 other NB/SH/T standards in that field.
In this catalogue, NB/SH/T standards carry edition years from 2010 to 2026.
3 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document.
GB/T 6379.2
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
NB/SH/T 0960
4 About this standard
Issued by: National Energy Administration
English translation: about 8 pages (approximate)
5 Related standards
Standards on related subjects:
GB/T 37354-2019 — Analytical method of chemical composition for activated carbon mercury removal catalyst
GB/T 34248-2017 — Performance test method of three-way catalyst
HG/T 2976-2011 — Fertilizer catalysts - Determination of attrition rate
6 Classification and status
International classification (ICS): 71.100.99
Chinese Standard Classification (CCS): G 74
Prefix NB/SH/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 6379.2Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
- GB/T 6682-2008Water for analytical laboratory use - Specification and test methods
NB/SH/T 0960
How to Download NB/SH/T 0954-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6379.2-2004 — Measurement methods and results -- Accuracy (trueness and precision) -- Part 2: Determine the standard methods of measurement repeatability and reproducibility of the basic method
GB/T 6379.2-2026 — Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
NB/SH/T 0954-2026
$154.00