LY/T 3216-2020Specification for national park symbol system (English PDF)

4.1 Material

National park signs should use natural materials or recyclable materials, which are waterproof, sun-proof, anti-corrosion, anti-freeze, and durable.

4.2 Dimensions

Except for special regulations in the main text, the size of the logo shall be implemented in accordance with Appendix A. When the mark is rectangular, its width refers to the square in Appendix A the size of the shape mark is preferably 2 to 3 times the length of the width.

4.3 Fonts and text

The font of the logo is in bold or Song typeface. If the national park is located in an area where ethnic minorities live If ethnic minority languages are used, the identification board should be marked with the ethnic minority languages.

4.4 Color

The base color is brown, and the main colors are white, black, red, yellow and blue. Among them, the warning signs are mainly yellow, and it is forbidden Sexual signs are mainly red. See Appendix B for the color numbers of the colors shown in the mode identification in this document.

4.5 Visible at night

For areas that allow night activities such as trails, bicycle lanes, visitor centers, checkpoints, and management and protection sites, the signs should be equipped with night lights.

Yes, improve night visibility.

4.6 Layout position

The sign should be placed in a location where there is no obstruction, no safety hazard, and no impact on the view.

4.7 QR code

According to the actual situation of each national park, two-dimensional code information can be added as appropriate to enrich the content of relevant identification information.

4.8 Preferred

For public signs not specified in this document, GB 2894, GB/T 10001 (all parts) and GB/T 15566 (all parts) shall be selected as priority.

Points), and meet its setting principles and requirements.

4.9 Use of national park emblems

The emblem of this national park may be added as appropriate. When the Chinese national park logo is used together with the national park emblem, the national park emblem the size should be significantly smaller than the China National Park logo.

5.1 Symbol for external guidance

External guide signs are set up along traffic roads outside the national park for visitors to identify. The identification plate is rectangular, the main color is it is brown and white. The left part is the Chinese national park logo, the upper right is the Chinese and English name of the national park, and the lower right is the guide arrow and Distance in kilometers. The pattern identification is shown in Figure 1.

Figure 1 External guide signs for national parks

5.2 Symbol for internal guidance

5.2.1 Internal monomer guidelines

Internal single guidance signs are set along the lines of specific places that require guidance and guidance. The identification plate is rectangular, and there should be a place Logo, Chinese and English name, with arrows to indicate the direction of the road, and mark the distance from the current location. Its mode identification is shown in Figure 2.

Figure 2 Individual guide signs inside national parks Figure 3 Comprehensive guide signs inside national parks

5.2.2 Internal comprehensive guidelines

Internal comprehensive guidance signs are set up at intersections of internal roads in national parks, sightseeing bus stops, recreational attractions, etc. that require guidance and guidance position. The identification plate is rectangular, and the main color is brown and white. There should be a Chinese national park logo, and the Chinese and English words pointing to the place should be marked the name should be indicated by an arrow, and the distance from the current location should be marked; a navigation map should be provided and the current location should be indicated.

The pattern identification is shown in Figure 3.

6.1 Symbol for entrance

Entrance signs should be based on the characteristics of the national park and the site conditions of the entrance, with unique and recognizable gates and locations in prominent locations.

Stone or other landscape objects.

The entrance sign should place the Chinese national park logo in the most eye-catching area, and the Chinese and English name of the national park should be marked.

6.2 Symbol for national park stele

The monument should be set at a prominent position on the border of the national park. The monument is divided into two forms with and without pedestal. The specification is the width of the tablet body not less than 250cm, thickness not less than 20cm; the height of the monument with a base is not less than 150cm above the base, and the height of the monument without a base the degree is not less than 150cm for the above-ground part.

Time." and "Unit.". On the back of the monument, a combination of Chinese and English briefly introduces the general situation of the national park, including location, geographic coordinates, Area, main protection objects, control zoning or functional zoning map, park ban, etc.

The pattern mark of the monument is shown in Figure 4.

6.3 Symbol for boundary stone

Boundary marker signs should be placed at important positions on the border of the national park. The specifications are divided into two types. small and large. The above-ground part of the small boundary marker the inch is 100cm (height) × 60cm (width) × 20cm (thickness); the size of the ground part of the large boundary monument is 160cm (height) × 100cm (width) ×20cm (thickness).

The China National Park logo is printed on the front of the boundary monument. If the national park has its own logo, it can be printed and engraved on the China National Park logo.

Number "YY", YY is the serial number, using Arabic numerals.

The pattern mark of the boundary marker is shown in Figure 5.

6.4 Symbol for boundary pillar

6.4.1 Land boundary posts

Land boundary piles should be set at the inflection point of the national park boundary, and areas with frequent human activities or turning points should be appropriately encrypted. Boundary stakes are square Cylinders are divided into small and large specifications, and the mode identification is shown in Figure 6.

6.4.2 Sea area and water area landmarks

The landmarks on the sea area and the water area adopt two forms. spherical buoy and cylindrical buoy. The mode identification is shown in Figure 7.

The diameter of the spherical buoy is not less than 50cm, and the text is marked on the spherical surface, and the upper part is marked with "No.. YY", YY is the serial number, using Allah Bo number; the Chinese and English names of the national parks are marked in red in the middle; "Longitude." and "Latitude." are marked in the lower part to indicate the geography of the national park Coordinates; standard waterline with red line at the bottom.

The cylindrical buoy is yellow, and the most prominent position in the middle is marked with "landmark" and "number. YY" in red, YY is the serial number, use Ah Raber numbers; the prominent place at the bottom is marked with the Chinese and English name of the national park in red. The specific style of the column buoy can be carried out according to the actual situation custom made.

6.5 Boundary symbol of control areas

6.5.1 Land area pile

Piles in the land area should be set at the inflection point of the boundary between the control area and the functional area, and the areas with frequent human activities or turning points should be appropriately encrypted.

The area pile is a square column, divided into small and large specifications.

The size of the aboveground part of the small land control area pile is 50cm (height) × 15cm (width) × 15cm (thickness). The front façade is marked with "core "Protection area", facing away from the core protection area of the national park; the back facade is marked with "General Control Area", facing away from the general control area of the National Park;

The side elevation is marked with "area stake" and "number YY", YY is the serial number, using Arabic numerals; the other side elevation is marked with the year of erection; the top of the district pile the surface is engraved with a red arrow and black text "Core Area", pointing to the core protection area. The mode identification is shown in Figure 8.

The size of the above-ground part of the large-scale land control area pile is 100cm (height) × 20cm (width) × 20cm (thickness). The upper part of the facade is marked with "nucleus" "Heart Protection Area"; the middle part is marked with "area stake" and "number YY", YY is the serial number, using Arabic numerals; the lower part is marked with the year of erection.

The upper part of the facade is marked with "general control area"; "area stake" and its serial number YY, YY is the serial number, using Arabic numerals; the lower part is marked with piles years. A red horizontal line is printed in the middle of the top surface of the district pile, and a red arrow and black text "Core Conservation Area" are printed on the top of the line, and the arrow points to the core Protected area; a red arrow and black text "General Control Area" are engraved below the line, and the arrow points to the general control area. The mode identification is shown in Figure 9.

The zone stakes of the functional zone shall refer to the above-mentioned form, and the name of the functional zone shall be determined in accordance with the relevant national park laws, regulations and technical standards.

6.5.2 Sea area and water area landmarks

The markings of control areas and functional areas in sea areas and water areas adopt two forms. spherical buoys and cylindrical buoys. The mode identification is shown in Figure 10.

The diameter of the spherical buoy is not less than 50cm, and the text is marked on the spherical surface, and the upper part is marked "number. YY number", YY is the serial number, use Ah Raber numbers; the middle part is marked with red text "No Entry" and "Core Protected Area"; the lower part is marked with "Longitude." and "Latitude." to indicate control Geographical coordinates of the district; standard waterline with red line at the bottom.

The column buoy is in red, and the most prominent position in the middle is marked with white "no entry", "core protection area" and "number. YY".

YY is the serial number, using Arabic numerals; the prominent place at the bottom is marked with the Chinese and English name of the national park in white. Specific style of cylindrical buoy can be customized according to the actual situation.

The regional standard of sea area and water area functional area shall refer to the above form, and the name of the functional area shall be determined in accordance with relevant national park laws, regulations and technical standards.