LY/T 1950-2011Fast-growing and high-yielding plantation of Pinus yunnanensis (English PDF)
云南松速生丰产林
This is a limited preview
Buy now to download the full PDF (12 pages)
Need quotation for your management?
Get a formal quotation for LY/T 1950-2011 in 30 minutes.
Issued by
State Forestry Administration
Level / Type
National · Recommended
Issue date
June 10, 2011
Implementation date
July 1, 2011
Scope
LY/T 1950-2011 is the English-translated version of 云南松速生丰产林.
LY/T 1950-2011 — This standard stipulates the technical measures for seedling, afforestation, tending management, harvesting and renewal, etc. adopted by Yunnan Songshengshengfeng Forest. Growth indicator requirements.
Found what you need?
Document preview — LY/T 1950-2011
National Standard of the People's Republic of China
- ICS
- 65.020.40
- Classification
- B 65
Issued by: State Forestry Administration
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Suitability of afforestation
- 3.1 Site type selection
- 3.2 Climate factor selection
- 4 Cultivation purposes and high yield indicators
- 4.1 Purpose of cultivation
- 4.2 Afforestation survival rate and preservation rate
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009 "Standardization Work Guide Part 1. Standard Structure and Compilation".
This standard is proposed and managed by the Construction and Management Office of the Fast-growing and High-yield Timber Forest Base of the State Forestry Administration.
This standard was drafted. Yunnan Forestry Academy, State Forestry Administration Fast-growing and high-yield timber forest base construction project management office.
Introduction
Pinusyunnanensis Franch. is an evergreen tree species of the genus Pinaceae, distributed in the north latitude 23 ° ~ 30 °, east longitude 96 ° ~ Between 108°, it is concentrated in the high mountains with an altitude of 1600m~2800m. It is very light, deep rooted, developed with main and lateral roots, resistant to drought and thinness.
Natural renewal is good under all light. Yunnan pine is a fast-growing afforestation tree species in the five southwestern provinces with a tree height of 40m and a DBH of 1m. Yunnan the pine is widely distributed, with Yunnan as the center, east to Guizhou Bijie, Shuicheng and western Guangxi Baise, north to southwest Sichuan Dadu River, Luding and it is south of Tianquan, west and the southeast of Tibet, and south to the south of Yunnan, Jingdong, Yuanyang, Pingbian and Maguan. Especially in Yunnan Province the cloth area is the widest, and its area and forest stock volume both occupy the first place. It is a pioneer species of barren mountain afforestation, economic, social and ecological to the distribution area.
Benefits play an important role. To standardize afforestation technology, establish and improve the technical responsibility system, and actively promote the application of new scientific and technological achievements and advanced this cultivation standard has been developed to improve the yield and quality of Yunnan pine fast-growing and high-yield forests. In the process of formulation, the technical standards and procedures are formulated in conjunction with the actual and recent developments of Yunnan pine species.
Yunnan Songshengshengfeng Forest
1 Scope
This standard stipulates the technical measures for seedling, afforestation, tending management, harvesting and renewal, etc. adopted by Yunnan Songshengshengfeng Forest.
Growth indicator requirements.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB 2772 forest seed inspection procedures GB/T 15781-2009 Forest tending procedures LY/T 1646-2005 Forest harvesting procedures
3 Suitability of afforestation
3.1 Site type selection
According to the yield and quality of Yunnan pine forest in the distribution area, eight site types suitable for the construction of Yunnan pine fast-growing and high-yield forest were selected and divided into 2 levels. (1) Optimum area. the type of purple soil in the middle of the shady slope of Zhongshan, the type of red soil in the middle of the shady slope, the volcanic ash in the middle thick layer Site type; (2) Appropriate zone. the type of yellow-red soil in the thick slope of the shady slope, the red soil site type in the middle slope of the sunny slope, and the yellow-red soil site in the middle slope of the sunny slope Type, medium-thick layer purple soil site type of Zhongshan Yangpo, and upper-thick layer yellow-red soil site type. See Appendix A for the optimum location characteristics.
See Appendix B for the characteristics of the site.
3.2 Climate factor selection
The altitude of Yunnan Songshengsheng high-yield forest cultivation area is 1400m~2500m, and the climate is mild throughout the year, with no heat and cold. The annual average temperature 13°C~19°C, the average temperature of the hottest month is 20°C~21°C, the average temperature of the coldest month is 7°C~9°C, and the accumulated temperature of >=10°C is 4000 ° C ~ 5500 ° C, annual rainfall of 800mm ~ 1200mm, relative humidity of 60% ~ 80%. The soil is purple soil or red loam soil.
The pH is 4.5~6.0.
4 Cultivation purposes and high yield indicators
4.1 Purpose of cultivation
The purpose of constructing Yunnan pine fast-growing and high-yield forest is to cultivate forests with medium and large-diameter timber as the main forest, for buildings, pillars, furniture and sawn timber.
Provide materials.
4.2 Afforestation survival rate and preservation rate
The survival rate of afforestation in the current year should reach more than 95% of the number of designed afforestation plants, and the preservation rate in the second year is over 90%.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 12 pages — is available in the English PDF.
Referenced standards
How to Download LY/T 1950-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 2772-1999 — Rules for forest tree seed testing
LY/T 1062-2025 — Comprehensive energy consumption for logging production and boardprocessing production
LY/T 1063-2025 — National Forest Fire Risk Zoning
Secure payment via Stripe
Payments accepted
LY/T 1950-2011
$444.00