LS/T 8006-2010Regulations to compile feasibility study report of grain engineering project (English PDF)

0.0.3 Principles and related requirements for the preparation of the feasibility study report

1 Must comply with national laws, regulations and regulations; implement relevant standards, norms and procedures in the countries, industries and areas where the project is located;

2 Feasibility studies must be realistic and adhere to objectivity, impartiality and scientificity;

3 Reflecting the state's requirements for the safety of food and its products; rational use of resources, land conservation, energy conservation, environmental protection and public protection interest;

4 For foreign-related projects such as overseas projects, foreign investment, joint ventures and cooperation, in addition to the implementation of these regulations, they shall also implement relevant national laws and regulations.

And in line with the contract and agreement documents signed by the parties to the investment;

5 If the competent department has special requirements for the preparation of the feasibility study report of the project, it shall be prepared according to its requirements;

When the contract of the research report requires otherwise, the requirements of the contract shall be met;

6 For independent projects involving docks, railways, off-site roads, etc., additional explanations should be made in the relevant sections;

7 The feasibility study report shall have the signature of the preparation unit and the registered consulting engineer and the signature of the main technical person in charge. By multiple units Collaborate on the feasibility study project, the overall responsible organization should be responsible for the depth, quality and integrity of the feasibility study report preparation;

8 In the implementation of these Provisions, if the State provides otherwise, it shall be prescribed.

0.0.4 Basic requirements for the depth of content of the feasibility study report

1 The compilation is based on reliable, complete content, accurate data, sufficient argumentation, clear conclusions, and standardized formats. Schedules, annexes and drawings should be complete.

Meet the requirements of the decision makers to set the project;

2 The main technical and economic programs in the feasibility study should have a comparison of two or more programs;

3 The technical parameters such as the performance and specifications of the main equipment proposed shall meet the requirements for the equipment reservation; the information on the introduction of technology and equipment shall be Meet the requirements of contract negotiation; the main raw and auxiliary materials, fuel, power and other data should meet the requirements of the foreign agreement;

4 The project's investment estimate, financing plan and financial evaluation should meet the credit decision requirements of financial institutions such as banks;

5 The main engineering and technical data determined shall meet the requirements for the preliminary design of the project.

1.1 Project Overview

1.1.1 Project Name

The full name of the project.

1.1.2 Project Management Department

The full name of the project authority or major investor.

1.1.3 Construction unit

The full name, address and legal representative of the construction unit. For Sino-foreign joint venture or cooperative business projects, the names of the parties, the country of registration, the address, and the law must be indicated.

Representatives and nationality.

1.1.4 Project construction site

Explain the detailed construction location of the project.