LS/T 8002-2007Regulations to compile the documents of grain engineering design (English PDF)

1.0.4 Principles for the depth of design documentation at each stage

1 The programme design document should meet the needs of the preparation of the preliminary design documents.

Note. For the bidding proposal, the depth of the design documents should meet the requirements of the bidding documents; if the bidding documents are not explicitly required, they can be prepared by referring to these regulations.

2 The preliminary design documents should meet the needs of preparing construction drawing design documents.

3 Construction drawing design documents shall meet the needs of equipment and materials procurement, non-standard equipment commissioning design and engineering construction.

4 When the design contract has additional requirements for the depth of the design documentation, the design documentation should be in depth to meet both the requirements and the design contract.

Requirements.

5 Civil construction projects shall be implemented in accordance with the "Deep Provisions on the Design of Construction Engineering Design Documents" promulgated by the current Ministry of Construction.

6 The preparation of the design documents at each stage shall be based on the project approval documents at the above stages. When the design needs to make major repairs to the approved content when the time is changed, it should be reported to the original examination and approval authority for approval before it can be amended.

7 At each stage of the design, the content and depth of the materials exchanged between the various professions should meet the needs of the corresponding professional design documents.

And in line with the relevant provisions of the state.

8 When the project is separately issued to multiple design units or when designing subcontracting, the design interface should be clearly defined to ensure the design depth requirements. main body the design unit is responsible for the integrity of the design documents.

1.0.5 At each stage of the design, the corresponding design documents are provided in accordance with national regulations, but the electronic version of the design documents is not provided.

1.0.6 In the design, national, industrial and local building standard design should be preferred according to local conditions, and should be listed in the drawing catalogue of the design documents.

Select the name of the atlas and the atlas number; indicate the selected atlas number, the page number and the detail number of the detail in the relevant drawings or design instructions.

1.0.7 The requirements for the depth of design documentation in this regulation are based on the design of a general food project. For specific work the project design can make reasonable choices for the provisions of this regulation according to the content and design scope of the project. When there is a project in the design of the project where the provisions are not covered, they may be supplemented into the design documents in accordance with the principles of 1.0.4 of this regulation.

2.1 General requirements

2.1.1 Composition of the design document

1 Design specifications, including design general instructions and professional design specifications;

2 Investment estimate form;

3 relevant professional design drawings;

4 Design perspectives, models, etc., otherwise specified in the commission or design contract.

2.1.2 Sequence of the design files of the plan

1 cover

Project name, preparation unit, preparation year and month.