Valid

JY/T 0589.5-2020General rules of analytical methods for thermal analysis - Part 5: Simultaneous thermogravimetric-differential thermal analysis and thermogravimetric-differential scanning calorimetry (English PDF)

热分析方法通则 第5部分:热重-差热分析和热重-差示扫描量热法

Preview PDF

This is a limited preview

Buy now to download the full PDF (9 pages)

Need quotation for your management?

Get a formal quotation for JY/T 0589.5-2020 in 30 minutes.

Issued by

Ministry of Education of the People's Republic of China

Level / Type

National · Recommended

Issue date

September 29, 2020

Implementation date

December 1, 2020

Scope

JY/T 0589.5-2020 is the English-translated version of 热分析方法通则 第5部分:热重-差热分析和热重-差示扫描量热法.

JY/T 0589.5-2020 — This standard specifies the principle of the test method using thermogravimetric-differential thermal analysis and thermogravimetric-differential scanning calorimetry, test environment requirements, reagents or materials, instruments, test samples, test procedures, result reports and safety precautions.

Found what you need?

Document preview — JY/T 0589.5-2020

National Standard of the People's Republic of China

ICS
03.180
Classification
Y 51
Replacing
JY/T 014-1996

Issued by: Ministry of Education of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Classification
  • 4 Requirements
  • 4.1 Qualitative analysis of phases
  • 4.2 Quantitative analysis of phase
  • 4.3 Determination of grain size and lattice distortion
  • 4.4 Determination of unit cell parameters of cubic crystals
  • 4.5 Solving the crystal structure from ab initio polycrystalline diffraction data
  • 4.6 High and low temperature diffraction
  • 5 Reagents and materials
  • 5.1 Standard material
  • 5.2 Organic solvents
  • 5.3 Sieves
  • 5.4 Sample preparation tools
  • 5.5 Microscope
  • 5.6 Specimen plate
  • 6 Instruments
  • 6.1 Composition of the instrument
  • 6.2 Verification or calibration
  • 7 Samples
  • 7.1 Pretreatment of samples
  • 7.2 Filling of the specimen plate
  • 7.3 Judge whether the specimen plate is available
  • 8 Analysis steps
  • 8.1 Startup and parameter setting of the instrument
  • 8.2 Steps of phase qualitative analysis
  • 8.3 Steps for phase quantitative analysis
  • 8.4 Determination of grain size and lattice distortion by linewidth method
  • 8.5 Procedure for determination of unit cell parameters of cubic crystals

1 Foreword

JY/T 0589.5-2020 was issued by Ministry of Education of the People's Republic of China on 29 September 2020 and has been in force since 1 December 2020.

It replaces the earlier edition JY/T 014-1996.

It is one of 5 parts of the JY/T 0589 series.

2 Scope Preview

This standard specifies the principle of the test method using thermogravimetric-differential thermal analysis and thermogravimetric-differential scanning calorimetry, test environment requirements, reagents or materials, instruments, test samples, test procedures, result reports and safety precautions. This standard applies to the general thermogravimetric-differential thermal analyzer and thermogravimetric-differential scanning calorimeter for thermal analysis of substances.

JY/T 0589.5-2020 falls under ICS 03.180, in the field of services and company organization.

This catalogue holds 130 other JY/T standards in that field.

In this catalogue, JY/T standards carry edition years from 1999 to 2026.

3 About this standard

Issued by: Ministry of Education of the People's Republic of China

English translation: about 9 pages

Chinese original: about 13,180 characters

Supersedes the earlier edition JY/T 014-1996.

4 Related standards

Other parts of this standard:

JY/T 0589.1-2020 — Part 1: General principles

JY/T 0589.2-2020 — Part 2: Differential thermal analysis

JY/T 0589.3-2020 — General Principles of Thermal Analysis Methods - Part 3: Differential Scanning Calorimetry

JY/T 0589.4-2020 — Part 4: Thermogravimetry

Standards on related subjects:

JY/T 0587-2020 — General rules for X-ray polycrystalline diffractometry

SN/T 0869-2017 — Determination of ascorbic acid in beverage for export

QB/T 1337-2010 — Pencil sharpener

5 Classification and status

International classification (ICS): 03.180

Chinese Standard Classification (CCS): Y 51

Prefix JY/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.

How to Download JY/T 0589.5-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
9 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JY/T 0589.5-2020

$265.00