Valid

JTGD 702-2014Specifications for Design of Highway Tunnels. Section 2 Traffic Engineering and Affiliated Facilities (English PDF)

公路隧道设计规范 第二册 交通工程与附属设施

Preview PDF

This is a limited preview

Buy now to download the full PDF (66 pages)

Need quotation for your management?

Get a formal quotation for JTGD 702-2014 in 30 minutes.

Issued by

Ministry of Transport

Level / Type

National · Mandatory

Issue date

May 29, 2014

Implementation date

August 1, 2014

Scope

JTGD 702-2014 is the English-translated version of 公路隧道设计规范 第二册 交通工程与附属设施.

JTGD 702-2014 — This standard applies to new construction and renovation mountain tunnels each grade highway.

Found what you need?

Document preview — JTGD 702-2014

National Standard of the People's Republic of China

ICS
93.080
Classification
P 66

Issued by: Ministry of Transport

Contents

  • [Preview only]
  • 1 General Provisions
  • 2 Terms and Symbols
  • 2.1 Terms 2
  • 2.2 Symblos 3
  • 2.3 Setting Position of Sign
  • 2.4 Supporting Mode of Sign
  • 2.5 Structure Design of Sign
  • 2.6 Material Requirements
  • 3 Design Standards 4
  • 3.1 General Requirements 6
  • 3.2 Characteristic Analysis of the Project and Highway Network 6
  • 3.3 Design Objectives 7
  • 3.4 Arrangement Scale 7
  • 3.5 Structural Design Standards 8
  • 3.6 Design Coordination and Interface Division 12
  • 3.7 Other Warning Signs
  • 4 Structural Composition Design 7
  • 4.1 General Requirements
  • 4.2 Pavement Structure Composition 7
  • 4.3 Subgrade 8
  • 4.4 Base and Subbase 8
  • 4.5 Surface Course 10
  • 4.6 Functional Layers 11
  • 4.7 Shoulder 12
  • 4.8 Pavement Drainage 12
  • 5 Material Property Requirements and Design Parameters 14
  • 5.2 Subgrade
  • 5.3 Granular Materials
  • 5.4 Inorganic Binder Stabilized Materials
  • 5.5 Asphalt Binder Materials
  • 5.6 Poisson's Ratio
  • 6 Checking Calculation of Pavement Structure 25
  • 6.2 Design Indexes
  • 6.3 Traffic, Material and Environment Parameters
  • 6.4 Checking Calculation Process of Pavement Structure
  • 6.5 Impact Attenuators
  • 6.6 Tourist Area Sign
  • 6.7 Setting of Directional signs in Particular Cases
  • 7 Renovation Design 30
  • 7.2 Investigation and Analysis of Existing Pavement
  • 7.3 Renovation Scheme
  • 7.4 Checking Calculation for Renovated Pavement Structure
  • 7.5 Guide Sign for Highway Information
  • 7.7 Notice Sign
  • 8 Bridge Deck Pavement Design 37
  • 8.2 Cement Concrete Bridge Deck Pavement
  • 8.3 Steel Bridge Deck Pavement
  • 8.4 Tide Lane Marking
  • 8.5 Carriageway Edge Marking
  • 8.6 Left-Turn Waiting Area Marking
  • 8.7 Intersection Guide Marking
  • 8.8 Guide Lane Marking
  • 8.9 No Parking Marking
  • 9 Preventing Fallen Object Fence 47
  • 9.2 Arrangement Principles
  • 9.3 Vehicle Distance Confirmation Marking
  • 9.4 Stop Line
  • 9.5 Stop to Yield Marking
  • 9.6 Speed Reduction Markings

1 Foreword

JTGD 702-2014 was issued by Ministry of Transport on 29 May 2014.

It has been in force since 1 August 2014.

The document runs to 66 pages in English translation.

2 Scope Preview

This standard applies to new construction and renovation mountain tunnels each grade highway.

JTGD 702-2014 falls under ICS 93.080, in the field of civil engineering.

This catalogue holds 6 other JTGD standards in that field.

In this catalogue, JTGD standards carry edition years from 2005 to 2017.

3 About this standard

Issued by: Ministry of Transport

English translation: about 66 pages

Chinese original: about 100,129 characters

4 Related standards

Standards on related subjects:

GB/T 23827-2021 — Road traffic sign plate and support

CJJ/T 135-2009 — Technical specification for pervious cement concrete pavement

JT/T 496-2004 — High-density polyethylene silicon duct for highway communication conduit

5 Classification and status

International classification (ICS): 93.080

Chinese Standard Classification (CCS): P 66

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 66 pages — is available in the English PDF.

How to Download JTGD 702-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
66 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JTGD 702-2014

$2,169.00