Valid

JT/T 1308-2020Highway Engineering Tunnel Fireproof Coating (English PDF)

公路工程 隧道防火涂料

Preview PDF

This is a limited preview

Buy now to download the full PDF (8 pages)

Need quotation for your management?

Get a formal quotation for JT/T 1308-2020 in 30 minutes.

Issued by

Ministry of Transport

Level / Type

National · Recommended

Issue date

January 1, 2020

Implementation date

July 1, 2020

Scope

JT/T 1308-2020 is the English-translated version of 公路工程 隧道防火涂料.

JT/T 1308-2020 is the Chinese standard "Highway Engineering Tunnel Fireproof Coating".

This standard specifies the product classification and marking, general requirements, technical requirements, test methods, inspection rules, and requirements for marking, packaging, transportation and storage of fire retardant coatings for highway engineering tunnels.

This standard applies to the production, inspection and use of fire retardant coatings for the surface of concrete structures in highway engineering tunnels. It was issued by Ministry of Transport.

Found what you need?

Document preview — JT/T 1308-2020

National Standard of the People's Republic of China

ICS
93.080.20
Classification
P66

Issued by: Ministry of Transport

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.2 Abbreviations
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Explosion suppression materials
  • 4.3 Explosion suppression requirements
  • 4.4 Installation and cleaning
  • 5 Test methods
  • 5.1 Basic requirements
  • 6 Inspection rules
  • 6.1 Installation inspection
  • 6.2 Periodic inspection
  • 6.3 Judgment rules
  • 6.4 Security analysis
  • 6.5 Threat intelligence management
  • 6.6 Risk identification
  • 6.7 Cybersecurity warning and judgment
  • 6.8 Information communication
  • 6.9 Response and disposal
  • 7 Marking and operating instructions
  • 7.1 Marking
  • 7.2 Operating instructions
  • 8.1 Contents to be displayed
  • 8.2 Display mode
  • 9 Interface requirements
  • 9.1 System cascade interface
  • 9.2 Data sharing interface

1 Foreword

JT/T 1308-2020 was issued by Ministry of Transport on 28 April 2020 and has been in force since 1 July 2020.

The JT/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 8 pages in English translation.

2 Scope Preview

This standard specifies the product classification and marking, general requirements, technical requirements, test methods, inspection rules, and requirements for marking, packaging, transportation and storage of fire retardant coatings for highway engineering tunnels. This standard applies to the production, inspection and use of fire retardant coatings for the surface of concrete structures in highway engineering tunnels.

JT/T 1308-2020 falls under ICS 93.080.20, in the field of civil engineering.

This catalogue holds 128 other JT/T standards in that field.

In this catalogue, JT/T standards carry edition years from 1991 to 2026.

3 About this standard

Sector: Highway & Transportation Industry Standard (Recommended)

Issued by: Ministry of Transport

English translation: about 8 pages (approximate)

Chinese original: about 11,151 characters

4 Related standards

Standards on related subjects:

GB/T 23827-2021 — Road traffic sign plate and support

CJJ/T 135-2009 — Technical specification for pervious cement concrete pavement

JT/T 496-2004 — High-density polyethylene silicon duct for highway communication conduit

JT/T 1131.5-2025 — Steel deck pavement - Part 5: Polyurethane adhesive

JT/T 1496-2024 — Technical requirements for access control systems in highway tunnel construction

JT/T 1309-2020 — Road hard asphalt

5 Classification and status

International classification (ICS): 93.080.20

Chinese Standard Classification (CCS): P 66

Prefix JT/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.

How to Download JT/T 1308-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
8 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JT/T 1308-2020

$135.00