Valid

JT/T 1261-2019Technical specifications for the repair of port car dumper system (English PDF)

港口翻车机系统修理技术规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (24 pages)

Need quotation for your management?

Get a formal quotation for JT/T 1261-2019 in 30 minutes.

Issued by

Ministry of Transport

Level / Type

National · Recommended

Issue date

January 1, 2019

Implementation date

July 1, 2019

Scope

JT/T 1261-2019 is the English-translated version of 港口翻车机系统修理技术规范.

JT/T 1261-2019 is the Chinese standard "Technical specifications for the repair of port car dumper system".

This standard specifies the material requirements for port dumpers, the repair techniques for dumpers, wheel pickers, wheel grippers, feeding systems, steel structures, special parts, general parts, hydraulic systems and components, electrical equipment and safety protection devices requirements, as well as the assembly and installation of port dumpers, and the requirements for commissioning and acceptance.

This standard is applicable to the rotary single-car, double-car, three-car and four-car dumper system for unloading and unloading of railway gondolas. The gondolas are fixed by hydraulic drive.

Other types of dumper systems can also be used for reference. It was issued by Ministry of Transport.

Found what you need?

Document preview — JT/T 1261-2019

National Standard of the People's Republic of China

ICS
53.020.20
Classification
R46

Issued by: Ministry of Transport

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.2 Abbreviations
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Explosion suppression materials
  • 4.3 Explosion suppression requirements
  • 4.4 Installation and cleaning
  • 5 Test methods
  • 5.1 Basic requirements
  • 6 Inspection rules
  • 6.1 Installation inspection
  • 6.2 Periodic inspection
  • 6.3 Judgment rules
  • 6.4 Security analysis
  • 6.5 Threat intelligence management
  • 6.6 Risk identification
  • 6.7 Cybersecurity warning and judgment
  • 6.8 Information communication
  • 6.9 Response and disposal
  • 7 Marking and operating instructions
  • 7.1 Marking
  • 7.2 Operating instructions
  • 8.1 Contents to be displayed
  • 8.2 Display mode
  • 9 Interface requirements
  • 9.1 System cascade interface
  • 9.2 Data sharing interface

1 Foreword

JT/T 1261-2019 is issued by Ministry of Transport.

The JT/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 24 pages in English translation.

2 Scope Preview

This standard specifies the material requirements for port dumpers, the repair techniques for dumpers, wheel pickers, wheel grippers, feeding systems, steel structures, special parts, general parts, hydraulic systems and components, electrical equipment and safety protection devices requirements, as well as the assembly and installation of port dumpers, and the requirements for commissioning and acceptance. This standard is applicable to the rotary single-car, double-car, three-car and four-car dumper system for unloading and unloading of railway gondolas. The gondolas are fixed by hydraulic drive. Other types of dumper systems can also be used for reference.

JT/T 1261-2019 falls under ICS 53.020.20, in the field of materials handling equipment.

This catalogue holds 14 other JT/T standards in that field.

In this catalogue, JT/T standards carry edition years from 1991 to 2026.

3 About this standard

Sector: Highway & Transportation Industry Standard (Recommended)

Issued by: Ministry of Transport

English translation: about 24 pages (approximate)

Chinese original: about 35,353 characters

4 Related standards

Standards on related subjects:

JT/T 1493-2024 — Safety requirements for boarding bridges at cruise terminals

JT/T 1492-2024 — Safety requirements for continuous bulk ship loaders

JT/T 1262-2019 — Technical specifications requirements for testing of jib cranes

5 Classification and status

International classification (ICS): 53.020.20

Chinese Standard Classification (CCS): R 46

Prefix JT/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.

How to Download JT/T 1261-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
24 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JT/T 1261-2019

$579.00