JT/T 1241-2019Technical specifications of separating facility for drivers compartment of urban public bus and trolley bus (English PDF)
城市公共汽电车驾驶区防护隔离设施技术要求
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for JT/T 1241-2019 in 30 minutes.
Issued by
Ministry of Transport
Level / Type
National · Recommended
Issue date
January 1, 2019
Implementation date
July 1, 2019
Scope
JT/T 1241-2019 is the English-translated version of 城市公共汽电车驾驶区防护隔离设施技术要求.
JT/T 1241-2019 is the Chinese standard "Technical specifications of separating facility for drivers compartment of urban public bus and trolley bus".
This standard specifies the composition and classification, general requirements, protection requirements, and technical requirements for guard doors, installation and identification of protective isolation facilities in urban bus and tram driving areas.
This standard is applicable to the protective isolation facilities in the driving area of ??newly purchased urban buses and trams with standing areas for passengers over 6m.
The installation of protective isolation facilities in the driving area of ??vehicles in use can be referred to as applicable. It was issued by Ministry of Transport.
Found what you need?
Document preview — JT/T 1241-2019
National Standard of the People's Republic of China
- ICS
- 43.080.20
- Classification
- T09
Issued by: Ministry of Transport
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.2 Abbreviations
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Explosion suppression materials
- 4.3 Explosion suppression requirements
- 4.4 Installation and cleaning
- 5 Test methods
- 5.1 Basic requirements
- 6 Inspection rules
- 6.1 Installation inspection
- 6.2 Periodic inspection
- 6.3 Judgment rules
- 6.4 Security analysis
- 6.5 Threat intelligence management
- 6.6 Risk identification
- 6.7 Cybersecurity warning and judgment
- 6.8 Information communication
- 6.9 Response and disposal
- 7 Marking and operating instructions
- 7.1 Marking
- 7.2 Operating instructions
- 8.1 Contents to be displayed
- 8.2 Display mode
- 9 Interface requirements
- 9.1 System cascade interface
- 9.2 Data sharing interface
1 Foreword
JT/T 1241-2019 is issued by Ministry of Transport.
The JT/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 8 pages in English translation.
2 Scope Preview
This standard specifies the composition and classification, general requirements, protection requirements, and technical requirements for guard doors, installation and identification of protective isolation facilities in urban bus and tram driving areas. This standard is applicable to the protective isolation facilities in the driving area of ??newly purchased urban buses and trams with standing areas for passengers over 6m. The installation of protective isolation facilities in the driving area of ??vehicles in use can be referred to as applicable.
JT/T 1241-2019 falls under ICS 43.080.20, in the field of road vehicle engineering.
This catalogue holds 38 other JT/T standards in that field.
In this catalogue, JT/T standards carry edition years from 1991 to 2026.
3 About this standard
Sector: Highway & Transportation Industry Standard (Recommended)
Issued by: Ministry of Transport
English translation: about 8 pages (approximate)
Chinese original: about 7,787 characters
4 Related standards
Standards on related subjects:
JT/T 1095-2022 — Flame resistance of commercial bus interior materials
QC/T 1174-2022 — High voltage fuse of electric vehicles
QC/T 1175-2022 — High voltage contactor for electric vehicles
JT/T 999-2015 — Basic Operation Procedures of Urban Bus and Trolleybus Emergency Disposal
5 Classification and status
International classification (ICS): 43.080.20
Chinese Standard Classification (CCS): T 09
Prefix JT/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
How to Download JT/T 1241-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JT/T 102-2026 — Anti-Money Laundering data collection and monitoring - Terminology
JT/T 1058-2026 — Transportation information system - Specification for database field naming and properties definition
JT/T 1142.1-2026 — Ship Traffic Management System Data Exchange - Part 1: IVEF Service
JT/T 1241-2019
$128.00