Valid

JJG 1179-2021Medical Diagnostic X-ray Radiation Sources for Spiral Computed Tomography(CT)Radiation Therapy Simulating Localization (English PDF)

医用诊断螺旋计算机断层摄影装置(CT)放射治疗模拟定位X射线辐射源检定规程

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JJG 1179-2021 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Mandatory

Issue date

October 18, 2021

Implementation date

April 18, 2022

Scope

JJG 1179-2021 is the English-translated version of 医用诊断螺旋计算机断层摄影装置(CT)放射治疗模拟定位X射线辐射源检定规程.

JJG 1179-2021 is the Chinese standard "Medical Diagnostic X-ray Radiation Sources for Spiral Computed Tomography(CT)Radiation Therapy Simulating Localization". Issued on 2021-10-18, in force from 2022-04-18.

Found what you need?

Document preview — JJG 1179-2021

Contents

  • 1 Scope(1)
  • 2 References (1)
  • 3 Terms and units of measurement(1)
  • 4 Overview(3)
  • 5 Measurement performance requirements(3)
  • 6 General technical conditions (5)
  • 7 Measuring Instrument Control(5)
  • 7.1 Verification Conditions (5)
  • 7.2 Verification items (6)
  • 7.3 Verification method (7)
  • 7.4 Processing of Verification Results (11)
  • 7.5 Verification Period(11)
  • Introduction

1 Scope(1)

2 References (1)

3 Terms and units of measurement(1)

4 Overview(3)

5 Measurement performance requirements(3)

6 General technical conditions (5)

7 Measuring Instrument Control(5)

7.1 Verification Conditions (5)

7.2 Verification items (6)

7.3 Verification method (7)

7.4 Processing of Verification Results (11)

7.5 Verification Period(11)

Appendix A Recommended Format for the Record of Radiation Source Verification for Simulated Location of CT Radiotherapy (12)

Appendix B Recommended Format of the CT Radiotherapy Simulation Positioning Radiation Source Verification Certificate (Inner Page) (14)

Appendix C Schematic diagram of detection of spiral CT phantom (15)

Appendix D CT Radiotherapy Simulation Positioning Radiation Source 3D Indication Diagram (17)

Introduction

JJF1002-2010 "Rules for the Compilation of National Metrological Verification Regulations", JJF1001-2011 "General Metrology Terms and Definition" and JJF1059.1-2012 "Measurement Uncertainty Evaluation and Representation" together constitute support for the formulation of this Regulation the basic series of specifications.

In the formulation of this regulation, reference is made to JJG 961-2017 "Medical Diagnostic Spiral Computed Tomography (CT) X-ray radiation source", AAPMRPT_83 "CT radiotherapy simulation positioning machine and the quality of CT simulation positioning process Quantity Guarantee" and other documents technical requirements and methods.

This regulation is published for the first time.

Medical Diagnostic Spiral Computed Tomography (CT) Radiotherapy simulation positioning X-ray radiation source verification regulations

1 Scope

This regulation applies to medical diagnostic spiral computed tomography (CT) radiotherapy simulation positioning X-ray the initial verification, subsequent verification and inspection in use of radiation sources (hereinafter referred to as CT radiotherapy analog positioning radiation sources).

2 Reference documents this regulation cites the following documents.

JJG 961-2017 Medical diagnostic spiral computed tomography (CT) X-ray radiation source JJG 1028-2007 Radiotherapy simulation positioning X-ray radiation source GB/T 10149 Terms and Symbols of Medical X-ray Equipment AAPMRPT _83 CT Radiation Therapy Simulation Positioning Machine and Quality Assurance of CT Simulation Positioning Process simulation process) for dated citations, only the dated version applies to this Regulation; for undated citations the latest version (including all amendments) applies to this regulation.

3 Terminology and units of measurement

3.1 Terminology

The terms and definitions defined in JJF1001, JJF1035 and the following apply to this regulation.

3.1.1 dose index

3.1.1.1 CT dose index 100 CTdoseindex100 (CTDI100) Vertical line dose distribution along the tomographic plane from -50mm to 50mm for a single axial scan the integral of is divided by the product of the number of volume slices N and the nominal volume slice thickness T.

For beamwidths with N·T less than 40mm.

CTDI100=integral

50mm

-50mm

N·Tdz

For beam widths with N·T greater than 40mm (all CT amplifiers except for beam limiter settings during measurement the operating conditions of the radiation source for the simulation positioning radiation source remain the same).

CTDI100=integral

50mm

-50mm

DRefz

(N·T)Ref

CTDIfreeair,N×T

CTDIfreeair,Ref

where.

D(z)---dose distribution along the z-axis of the vertical line of the body plane (centered at z=0), this dose is divided into the cloth is measured in a polymethyl methacrylate (PMMA, plexiglass) phantom, but as measured by air absorbed dose;

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download JJG 1179-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJG 1179-2021

$330.00