Valid

JJG 1166-2019Single Point Acoustic Doppler Current Measuring Instrument (English PDF)

声学多普勒海流单点测量仪检定规程

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JJG 1166-2019 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Mandatory

Issue date

January 1, 2019

Implementation date

March 31, 2020

Scope

JJG 1166-2019 is the English-translated version of 声学多普勒海流单点测量仪检定规程.

JJG 1166-2019 is the Chinese standard "Single Point Acoustic Doppler Current Measuring Instrument".

Found what you need?

Document preview — JJG 1166-2019

National Standard of the People's Republic of China

ICS
17.140

Contents

  • Introduction (II)
  • 1 Scope (1)
  • 2 References (1)
  • 3 Terms and units of measurement (1)
  • 3.1 Terminology (1)
  • 3.2 Unit of measurement (1)
  • 4 Overview (1)
  • 5 Measurement performance requirements (2)
  • 6 General technical requirements (2)
  • 7 Control of measuring instruments (2)
  • 7.1 Verification conditions (2)
  • 7.2 Verification items (3)
  • 7.3 Verification method (4)
  • 7.4 Processing of verification results (6)
  • 7.5 Verification period (6)
  • Appendix A Calculation of vehicle speed change rate (7)
  • Appendix B Conversion of Standard Flow Rate (8)
  • Appendix C. Acoustic Doppler Current Current Single Point Measuring Instrument Verification Record Table Format (9)
  • Appendix D Format of the inner pages of the verification certificate (14)
  • Appendix E Format of the inner page of the notice of verification result (16)

1 Scope (1)

2 References (1)

3 Terms and units of measurement (1)

3.1 Terminology (1)

3.2 Unit of measurement (1)

4 Overview (1)

5 Measurement performance requirements (2)

6 General technical requirements (2)

7 Control of measuring instruments (2)

7.1 Verification conditions (2)

7.2 Verification items (3)

7.3 Verification method (4)

7.4 Processing of verification results (6)

7.5 Verification period (6)

Appendix A Calculation of vehicle speed change rate (7)

Appendix B Conversion of Standard Flow Rate (8)

Appendix C. Acoustic Doppler Current Current Single Point Measuring Instrument Verification Record Table Format (9)

Appendix D Format of the inner pages of the verification certificate (14)

Appendix E Format of the inner page of the notice of verification result (16)

Introduction

The preparation of this regulation is based on JJF1001-2011 "General Measurement Terms and Definitions", JJG 1002-2010 "Country the "Measuring Verification Regulations Writing Rules" is formulated on the basis and basis.

This regulation is issued for the first time.

Verification Regulation of Acoustic Doppler Current Current Single Point Measuring Instrument

1 Scope

This regulation is applicable to acoustics with a flow direction measurement range of (0~360)° and a flow rate measurement range of (5~300) cm/s the first verification, subsequent verification and in-use inspection of Doppler current single-point measuring instrument.

2 Reference documents this regulation refers to the following documents.

JJG 1001-2011 General Measurement Terms and Definitions GB/T 15920-2010 Oceanographic terminology physical oceanography for dated references, only the dated versions are applicable to this Regulation; for those without dates the latest version (including all amendments) is applicable to this regulation.

3 Terms and units of measurement

3.1 Terminology

The terms and definitions defined in JJG 1001-2001 and GB/T 15920-2010 are applicable to this regulation.

3.2 Unit of measurement

3.2.1 Flow rate unit. centimeters per second, symbol. cm/s.

3.2.2 Flow direction unit. degree, symbol. °.

4 Overview

Acoustic Doppler ocean current single-point measuring instrument (hereinafter referred to as "ocean current meter") is based on the principle of acoustic Doppler frequency shift, the transducer emits short acoustic pulses in the direction of the narrow beam and receives the scattered particles returned by the beam as it passes through the body of water Acoustic signals, use these signals to calculate the velocity and direction. The current meter can measure the current in the anchor/fixed state Measure the flow velocity and direction of the water body in the area of 0.4m~1.0m from the transducer at the installation depth. The working principle of the current meter is shown in Figure 1 as shown.

Note. Scattered particulate matter usually refers to plankton, air bubbles, suspended sediment or organic matter, and particulate matter produced by human activities.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download JJG 1166-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJG 1166-2019

$330.00