JJG 1092-2013Locomotive Speedmeters (English PDF)
机车速度表检定规程
This is a limited preview
Buy now to download the full PDF (9 pages)
Need quotation for your management?
Get a formal quotation for JJG 1092-2013 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine
Level / Type
National · Mandatory
Issue date
November 28, 2013
Implementation date
February 28, 2014
Scope
JJG 1092-2013 is the English-translated version of 机车速度表检定规程.
JJG 1092-2013 is the Chinese standard "Locomotive Speedmeters". Issued on 2013-11-28, in force from 2014-02-28.
Found what you need?
Document preview — JJG 1092-2013
National Standard of the People's Republic of China
- ICS
- 17.080
Contents
- Introduction (II)
- 1 Scope (1)
- 2 Overview (1)
- 3 Metering performance requirements (1)
- 3.1 Measurement range (1)
- 3.2 Indication error (1)
- 3.3 Return error (1)
- 3.4 Zero Error (1)
- 3.5 Speed setpoint deviations (1)
- 3.6 Insulation Resistance (2)
- 4 General Requirements (2)
- 4.1 Appearance (2)
- 4.2 Interaction of each part (2)
- 5 Control of measuring instruments (2)
- 5.1 Verification Conditions (2)
- 5.2 Verification Project (2)
- 5.3 Calibration Method (2)
- 5.4 Test results processing (4)
- 5.5 Test cycle (4)
- Appendix A Locomotive speedometer test records (5)
- Appendix B Test certificates/test results in the notice page format (6)
1 Scope (1)
2 Overview (1)
3 Metering performance requirements (1)
3.1 Measurement range (1)
3.2 Indication error (1)
3.3 Return error (1)
3.4 Zero Error (1)
3.5 Speed setpoint deviations (1)
3.6 Insulation Resistance (2)
4 General Requirements (2)
4.1 Appearance (2)
4.2 Interaction of each part (2)
5 Control of measuring instruments (2)
5.1 Verification Conditions (2)
5.2 Verification Project (2)
5.3 Calibration Method (2)
5.4 Test results processing (4)
5.5 Test cycle (4)
Appendix A locomotive speedometer test records (5)
Appendix B test certificates/test results in the notice page format (6)
Introduction
JJF1002-2010 "national verification procedures write rules", JJF1001-2011 "common terminology and measurement Definitions ", JJF1059.1-2012" Evaluation and Expression of Uncertainty in Measurement "together constitute the support of the protocol development the basic series of specifications.
This procedure is a reference to the TB/T 2438-1993 "indicating analogue speedometer locomotive" of metering and general performance requirements Drafting of technical requirements.
This procedure was first formulated.
Locomotive speed meter testing procedures
1 Scope
The order applies to locomotive speed table (hereinafter referred to as the speedometer) initial verification, and subsequent use an examination.
2 Overview
The speedometer is used to measure the speed of the train of a special measuring instruments, speedometer indicator is mounted on the locomotive or motor car Driver's steering group on stage, instead of supporting a sensor mounted to the wheel shaft, the locomotive speed indicator values come out.
Speedometer refers magnetic sensor speedometer (hereinafter referred to as "magnetic speed table") and a photoelectric sensor Speedometer (hereinafter referred to as "photoelectric speedometer").
Magnetic-electric speedometer is driven to rotate within the magnetic sensor AC tachometer generator rotor by locomotive axle, resulting in post DC voltage, AC voltage and the linear relationship between the locomotive speed to measure the speed of the locomotive. Sample output for speed control Locomotive automatic control operation, when the engine speed reaches or exceeds the speed setpoint, speed of the surface of the respective board LED status transformation, the corresponding relay contacts switch simultaneously, in order to achieve the locomotive speed control.
Photoelectric speedometer is driven to rotate the grating within the photosensor by the locomotive axle, generates a pulse signal having a pulse the frequency is proportional to the rotational speed of the wheel, which is proportional to the engine speed; pulse signal output circuit and then through the channel conversion circuit no, by measuring the signal circuit to measure the speed of the locomotive.
3 metering performance requirements
3.1 Measuring range
Measuring upper range of the speedometer should be one of the following values. 100km/h, 120km/h, 150km/h, 160km/h, 200km/h, 250km/h, 300km/h, 350km/h, 400km/h, 450km/h.
3.2 Indication error in the measuring range, the error rate than the value shown in Table zero value should not be negative error, the error value should not at 5km/h.
3.3 Return Error
Within the speedometer measuring range at any point hysteresis errors should be less than 2.5km/h.
3.4 Zero Error
When a table showing the value of stable speed limit was reduced from measurement to zero, if not the pointer back to zero, the error should not exceed Over ± 2km/h.
3.5 speed setpoint deviations (for magnetic-electric speedometer) when the value of the speed setpoint and speed for switching differential value shall not exceed ± 3km/h.
Note. The "speed setpoint bias" applies only to the speed set point speedometer.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.
How to Download JJG 1092-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJG 1151-2025 — Verification Regulation of Liquid Chromatograph-Atomic Fluorescence Spectrometers
JJG 1204-2025 — Verification Regulation of Electronic Price Computing Scales(for Trial Implementation)
JJG 579-2025 — Trial Case Lenses
JJG 1092-2013
$165.00