Valid

JJG 1083-2013Verification Regulation of Anchorage Testing Machines (English PDF)

锚固试验机

Preview PDF

This is a limited preview

Buy now to download the full PDF (11 pages)

Need quotation for your management?

Get a formal quotation for JJG 1083-2013 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine

Level / Type

National · Mandatory

Issue date

February 16, 2013

Implementation date

May 16, 2013

Scope

JJG 1083-2013 is the English-translated version of 锚固试验机.

JJG 1083-2013 is the Chinese standard "Verification Regulation of Anchorage Testing Machines". Issued on 2013-02-16, in force from 2013-05-16.

Found what you need?

Document preview — JJG 1083-2013

National Standard of the People's Republic of China

ICS
17.100

Contents

  • Introduction (II)
  • 1 Scope (1)
  • 2. References (1)
  • 3 Terminology and units of measurement (1)
  • 4 Overview (2)
  • 5 Metering performance requirements (2)
  • 5.1 Test machine measuring system metrological characteristics (2)
  • 5.2 The maximum permissible concentricity error (3)
  • 5.3 Displacement measuring device metrological characteristics (3)
  • 5.4 Noise testing machine (3)
  • 6 General Requirements (3)
  • 6.1 Appearance (3)
  • 6.2 Performance Testing Machine (3)
  • 7 Control of measuring instruments (3)
  • 7.1 Test conditions (3)
  • 7.2 Test items and test methods (4)
  • 8 Test results processing (6)
  • 9 Test cycle (6)
  • Appendix A Reference test schematic (7)
  • Appendix B Anchor testing machine test recording format (8)
  • Appendix C Anchor testing machine test certificate page format (9)
  • Appendix D Anchor testing machine test results of notice inside styles (10)

1 Scope (1)

2 References (1)

3 Terminology and units of measurement (1)

4 Overview (2)

5 Metering performance requirements (2)

5.1 Test machine measuring system metrological characteristics (2)

5.2 The maximum permissible concentricity error (3)

5.3 Displacement measuring device metrological characteristics (3)

5.4 Noise testing machine (3)

6 General Requirements (3)

6.1 Appearance (3)

6.2 Performance Testing Machine (3)

7 Control of measuring instruments (3)

7.1 Test conditions (3)

7.2 Test items and test methods (4)

8 Test results processing (6)

9 Test cycle (6)

Appendix A reference test schematic (7)

Appendix B anchor testing machine test recording format (8)

Appendix C anchor testing machine test certificate page format (9)

Appendix D anchor testing machine test results of notice inside styles (10)

Introduction

The procedure according to JJF1002 "national verification procedures to write rules" be written.

The procedures in the development process to fully consider the national standard GB/T 2611 "Test General technical requirements" GB/T 3159 "hydraulic universal testing machine", GB/T 14370-2007 "Tendons Anchorage, fixtures and connectors "On and JT/T 329-2010" Highway Bridge prestressing strand anchorage, grip and coupler "relevant test machine the relevant technical requirements, technical specifications and test methods.

This procedure is the first issue.

Anchor testing machine test procedures

1 Scope

The order applies to anchor testing machine (hereinafter referred to as test machine) initial verification, and subsequent use an examination.

2. References

This procedure references the following documents.

GB/T 2611 General requirements for testing machines GB/T 3159 hydraulic universal testing machine GB/T 14370-2007 tendons anchorage, grip and coupler JT/T 329-2010 highway bridge prestressing strand anchorage, grip and coupler for dated references, only the dated edition applies to this procedure; undated reference documents Member, the latest edition (including any amendments) applies to this procedure.

3 terminology and units of measurement Symbols used in this procedure, the unit is described in Table 1.

Table 1 Symbols, units and description

Symbol Unit Description FN kN force on the test machine measuring range limits Fr kN test machine force measurement range lower limit Process Fi kN testing machine force indication means indication F'i kN testing machine force indication means indicates a return F kN standard dynamometer process Indication Return indication F 'kN standard Dynamometer Fi kN same measurement point three measurements, the test machine force indication means the process of showing the value of the arithmetic mean of Fi F kN same measurement point three measurements, the arithmetic mean of the standard dynamometer process of showing the value of F Fimax kN same measurement point three measurements, the test machine force indication means the process of showing the value of the maximum Fi Fimin kN same measurement point three measurements, the test machine force indication means the process of showing the value of the minimum Fi Fmax kN same measurement point three measurements, the standard dynamometer process shows the maximum value of F Fmin kN same measurement point three measurements, the standard dynamometer process shows the minimum value F r kN testing machine force indication device resolution alpha% test machine force indication of the relative resolution of the device

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 11 pages — is available in the English PDF.

How to Download JJG 1083-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
11 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJG 1083-2013

$195.00