JJG 1076-2012Verification Regulation of Verification Equipment for Traffic Loop-based Speed Meters (English PDF)
机动车地感线圈测速系统检定装置
This is a limited preview
Buy now to download the full PDF (11 pages)
Need quotation for your management?
Get a formal quotation for JJG 1076-2012 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine
Level / Type
National · Mandatory
Issue date
March 5, 2012
Implementation date
June 5, 2012
Scope
JJG 1076-2012 is the English-translated version of 机动车地感线圈测速系统检定装置.
JJG 1076-2012 - This standard applies by changing the sense coil inductance principle vehicle speed sense coil system verification device initial verification, testing and use of follow-up checks.
Found what you need?
Document preview — JJG 1076-2012
National Standard of the People's Republic of China
- ICS
- 17.080
Contents
- Introduction (II)
- 1 Scope (1)
- 2. References (1)
- 3 Terminology and units of measurement (1)
1 Scope (1)
2 References (1)
3 Terminology and units of measurement (1)
Trigger 3.1 (1)
3.2 Trigger signal (1)
Interval 3.3 (1)
Sense of distance between the coils to 3.4 (1)
3.5 Simulation speed (1)
4 Overview (1)
5 Metering performance requirements (1)
5.1 1s frequency stability (1)
5.2 The maximum permissible time interval error (2)
5.3 Analog speed range (2)
5.4 Simulation Speed The maximum permissible error (2)
6 General Requirements (2)
6.1 Appearance (2)
6.2 Other (2)
7 Control of measuring instruments (2)
7.1 Verification Conditions (2)
7.2 Test items and test with appliances (2)
7.3 Verification Methods (3)
7.4 Test results processing (4)
7.5 Test cycle (4)
Appendix A sense coil type speedometer calibration device test records (recommended) format (5)
Appendix B test certificate page format (7)
Appendix C test results in the notice page format (8)
Distance, speed and time interval between the coil table in Appendix D (9)
Introduction
This procedure based on JJF1002-2010 "national verification procedures write rules", JJF1001-1998 "Tong Metering terms and definitions ", JJF1059-1999" Evaluation and Expression of Uncertainty in Measurement ", JJF1094-2002 "Measuring instrument characteristics assessment" and other basic family of specifications developed.
Vehicle speed sense coil system verification test procedures means
1 Scope
The order applies to the sense by changing the vehicle speed and the sense coil system verification device inductance coil principle (Hereinafter referred to as "verification unit") the initial verification, subsequent verification and the use of checks.
2. References
This procedure references the following documents.
JJG 180-2002 electronic measuring instruments within the quartz oscillator JJG 527-2007 vehicle speed automatic monitoring system for dated references, only the dated edition applies to this procedure; undated reference documents Member, the latest version (including all repair orders) applies to this procedure.
3 terminology and units of measurement
3.1 Trigger
By a wire wound or hollow core toroidal coil for sensing and sense coil excitation subject.
3.2 trigger triggersignal Verification issued by the host device, the signal generated by the flip-flop, in order to simulate the vehicle speed.
3.3 Interval timeinterval the time between two trigger signals.
Distancebetweencoils 3.4 distance between the sense coil Coil mounted on the same lane, according to the direction of travel of the vehicle, adjacent edges of two coils (i.e., vehicle the vertical distance to go through the edge) between.
3.5 analog speed simulationspeed when the distance between adjacent coils being determined by measuring the time interval between their respective trigger signal derived ratio.
4 Overview
Test device to simulate the speed and distance needed to set a given sense coil between the respective trigger signal derived Intervals. The principle of electromagnetic induction trigger signal is transmitted to the sense coil speedometer, thus simulating the bus Traveling speed vehicle.
Verification by the host device and flip-flops for more than two and a sense coil vehicle speed automatic monitoring System simulation test speed error.
5 metering performance requirements 5.1 1s frequency stability
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 11 pages — is available in the English PDF.
How to Download JJG 1076-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJG 1151-2025 — Verification Regulation of Liquid Chromatograph-Atomic Fluorescence Spectrometers
JJG 1204-2025 — Verification Regulation of Electronic Price Computing Scales(for Trial Implementation)
JJG 579-2025 — Trial Case Lenses
JJG 1076-2012
$195.00