JJG 1074-2012Verification Regulation of Vehicle Laser Speed Measurement Device (English PDF)
机动车激光测速仪
This is a limited preview
Buy now to download the full PDF (10 pages)
Need quotation for your management?
Get a formal quotation for JJG 1074-2012 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine
Level / Type
National · Mandatory
Issue date
March 2, 2012
Implementation date
June 2, 2012
Scope
JJG 1074-2012 is the English-translated version of 机动车激光测速仪.
JJG 1074-2012 is the Chinese standard "Verification Regulation of Vehicle Laser Speed Measurement Device". Issued on 2012-03-02, in force from 2012-06-02.
Found what you need?
Document preview — JJG 1074-2012
National Standard of the People's Republic of China
- ICS
- 17.080
Contents
- Introduction (II)
- 1 Scope (1)
- 2. References (1)
- 3 Terminology and units of measurement (1)
- 3.1 Pulse laser speed (1)
- 3.2 Vehicle laser gun simulation test device (1)
- 4 Overview (1)
- 5 Metering performance requirements (1)
- 5.1 Pulse repetition rate of change (1)
- 5.2 Speed range (1)
- 5.3 Analog tachometer error (2)
- 5.4 Field speed error (2)
- 6 General Requirements (2)
- 6.1 Appearance and structure (2)
- 6.2 Safety requirements and environmental suitability (2)
- 7 Control of measuring instruments (2)
- 7.1 Verification Conditions (2)
- 7.2 Verification Project (2)
- 7.3 Verification Methods (3)
- 7.4 Test results processing (4)
- 7.5 Test cycle (4)
1 Scope (1)
2 References (1)
3 Terminology and units of measurement (1)
3.1 Pulse laser speed (1)
3.2 Vehicle laser gun simulation test device (1)
4 Overview (1)
5 Metering performance requirements (1)
5.1 Pulse repetition rate of change (1)
5.2 Speed range (1)
5.3 Analog tachometer error (2)
5.4 Field speed error (2)
6 General Requirements (2)
6.1 Appearance and structure (2)
6.2 Safety requirements and environmental suitability (2)
7 Control of measuring instruments (2)
7.1 Verification Conditions (2)
7.2 Verification Project (2)
7.3 Verification Methods (3)
7.4 Test results processing (4)
7.5 Test cycle (4)
A single beam laser velocimetry test Examples Appendix (5) Appendix B dual-beam laser velocimetry test sample (6) Appendix C vehicle laser velocimetry test certificate within page format (8) Appendix D vehicle laser velocimetry test results in the notice page format (9)
Introduction
JJG 1074-2012 "vehicle laser gun" basis JJF1002-2010 "national verification procedures compiled Write the rules ", JJF1001-1998" common measurement terms and definitions ", JJF1059-1999" Measurement Uncertainty assessment and given that "family norm-setting and other infrastructure.
JJG 1074-2012 "vehicle laser gun" main reference GB/T 21255-2007 "Motor Vehicle Speedometer ", JJG 527-2007" vehicle speed automatic monitoring system ", JJG 528-2004" Ray motor vehicle Speedometer up "and IACPLIDAR Module.2006" SPEED-MEASURINGDEVICEPER-FORMANCESPECIFICATIONS. LIDARMODULE "formulation, and in accordance with domestic laser gun Usage, adds dual laser gun related content.
Vehicle laser gun verification procedures
1 Scope
The order applies to motor vehicle mobile laser gun (including handheld) and pulsed laser velocimetry principle Speed overdrive automatic vehicle monitoring system unit (hereinafter referred to as "laser gun") velocity measurement of performance for the first time Test, test and subsequent use of checks.
2. References
This procedure references the following documents.
JJG 527-2007 vehicle speed automatic monitoring system JJG 528-2004 vehicle radar gun JJF1094-2002 measuring instrument characteristics evaluation GB 7247.1-2001 Safety of laser products - Part 1. Equipment Classification, Requirements and User's Guide GB/T 21255-2007 vehicle speedometer for dated references, only the dated edition applies to this procedure; undated reference documents Member, the latest edition (including any amendments) applies to this procedure.
3 terminology and units of measurement 3.1 pulse laser gun lightdetectionandranging by a semiconductor laser emits a narrow laser pulse train to the measured target, a series of successive fixed time interval Laser ranging, to give the measured target position of the sequence relative to the measurement point changes with time, to thereby obtain the measured target mobile speed.
3.2 vehicle laser gun simulation verification device simulatorforlidarspeed-measuringdevice Pulsed laser beam for periodically receiving the vehicle speed laser gun or a laser emitting unit, and send Detection value corresponding to the set simulation speed, distance and direction of travel of the corresponding time delay after the pulsed laser beam equipment.
4 Overview
Laser gun is the use of laser speed principle, the vehicle speed measuring instruments. According to how the points Mobile and fixed, structured into a single beam and double beam.
5 metering performance requirements 5.1 pulse repetition rate of change <=0.1%.
5.2 speed range
Approaching and leaving direction is at least satisfied (20 ~ 180) km/h.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 10 pages — is available in the English PDF.
Referenced standards
How to Download JJG 1074-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJG 1151-2025 — Verification Regulation of Liquid Chromatograph-Atomic Fluorescence Spectrometers
JJG 1204-2025 — Verification Regulation of Electronic Price Computing Scales(for Trial Implementation)
JJG 579-2025 — Trial Case Lenses
JJG 1074-2012
$195.00