Valid

JJF 1261.11-2017Rules of Metrology Testing for Energy Efficiency of Domestic Solar Water Heating Systems (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (26 pages)

Need quotation for your management?

Get a formal quotation for JJF 1261.11-2017 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine

Level / Type

National · Mandatory

Issue date

September 26, 2017

Implementation date

March 26, 2018

Scope

JJF 1261.11-2017 (Rules of Metrology Testing for Energy Efficiency of Domestic Solar Water Heating Systems) is available as an English-translated PDF.

JJF 1261.11-2017 — This standard specifies the energy efficiency measurement requirements, metrological testing procedures, metrological testing methods, criteria for the assessment of measurement results, and test reports for household solar water heating systems with a hot water storage tank capacity of less than 0.6 m3.

This standard is applicable to the measurement and supervision of energy efficiency of domestic solar hot water systems with a capacity of hot water storage tank below 0.6m3.

The entrusted inspection may refer to this standard. Units that produce and sell domestic solar hot water systems may also be tested in accordance with this standard.

Found what you need?

Document preview — JJF 1261.11-2017

National Standard of the People's Republic of China

ICS
17.020
Classification
A 50
Replacing
JJF 1261.11-2013

Issued by: General Administration of Quality Supervision, Inspection and Quarantine

Contents

  • Introduction (II)
  • 1 Scope (1)
  • 2 References (1)
  • 3 Terms and units of measure (1)
  • 3.1 Unit Profiles Daylighting Area Useful Daily Heat (q17) (1)
  • 3.2 Average Heat Loss Factor (USL) (1)
  • 3.3 Domestic solar energy hot water system energy efficiency coefficient (CTP) (1)
  • 3.4 Limitation of Energy Efficiency for Domestic Solar Hot Water Systems (2)
  • 4 Overview (2)
  • 5 Metrological requirements (2)
  • 5.1 Energy Efficiency Labelling (2)
  • 5.2 Energy Efficiency Indicators (2)
  • 5.3 Energy efficiency rating (3)
  • 6 Testing conditions (3)
  • 6.1 Environmental Conditions (3)
  • 6.2 Measuring Equipment (3)
  • 6.3 Measurement uncertainty (5)
  • 7 Testing Items and Methods (5)
  • 7.1 Sampling Principles and Methods (5)
  • 7.2 Sample Testing (6)
  • 7.3 Original Records (13)
  • 7.4 Data Processing (13)
  • 8 Test Results (13)
  • 8.1 Eligibility Criteria for Measurement of Energy Efficiency Index Measurements (13)
  • 8.2 Test results assessment criteria (14)
  • 8.3 Test Report (14)
  • Appendix A Evaluation of the Uncertainty of Thermal Measurement Using a Unit with a Profile Sunlight Area for Domestic Solar Water Heating Systems

1 Scope (1)

2 References (1)

3 Terms and units of measure (1)

3.1 Unit Profiles Daylighting Area Useful Daily Heat (q17) (1)

3.2 Average Heat Loss Factor (USL) (1)

3.3 Domestic solar energy hot water system energy efficiency coefficient (CTP) (1)

3.4 Limitation of Energy Efficiency for Domestic Solar Hot Water Systems (2)

4 Overview (2)

5 Metrological requirements (2)

5.1 Energy Efficiency Labelling (2)

5.2 Energy Efficiency Indicators (2)

5.3 Energy efficiency rating (3)

6 Testing conditions (3)

6.1 Environmental Conditions (3)

6.2 Measuring Equipment (3)

6.3 Measurement uncertainty (5)

7 Testing Items and Methods (5)

7.1 Sampling Principles and Methods (5)

7.2 Sample Testing (6)

7.3 Original Records (13)

7.4 Data Processing (13)

8 Test Results (13)

8.1 Eligibility Criteria for Measurement of Energy Efficiency Index Measurements (13)

8.2 Test results assessment criteria (14)

8.3 Test Report (14)

Appendix A Evaluation of the Uncertainty of Thermal Measurement Using a Unit with a Profile Sunlight Area for Domestic Solar Water Heating Systems

Example(16)

Appendix B Examples of Evaluation of Uncertainty in Measurement of Average Heat Loss Factor for Domestic Solar Hot Water Systems (21)

Appendix C Examples of Evaluation of Uncertainty in Measurement of Energy Efficiency Coefficient (CTP) of Domestic Solar Hot Water Systems (24)

Appendix D Sample Sheet for Energy Efficiency Measurement of Domestic Solar Hot Water Systems (format) (25)

Appendix E Original records of energy efficiency measurement for domestic solar hot water systems (format) (26)

Appendix F Energy Efficiency Measurement Test Report for Domestic Solar Hot Water Systems (Format) (30)

Introduction

In order to regulate the implementation of energy efficiency logo management of domestic solar hot water systems (hereinafter referred to as home solar energy) the energy efficiency measurement and inspection work is based on the JJF 1261.1-2017 Energy Efficiency Measurement and Detection Rules for Energy-using Products.

Requirements, the development of this specification.

This specification replaces JJF 1261.11-2013, compared with JJF 1261.11-2013, except for editorial modifications.

The main changes are as follows.

--- The name of the specification was changed from "Household solar hot water system energy efficiency identification measurement and measurement rules" to "Home use too Yangneng Hot Water System Energy Efficiency Measurement and Detection Rules;

--- "5.1 energy efficiency labeling" to increase "energy efficiency information code" and "energy efficiency 'leader' information", etc.

Claim;

--- The original record format and test report format were revised accordingly (Appendix E, Appendix F).

The previous versions of this specification were issued as follows.

---JJF 1261.11-2013.

Domestic solar hot water system energy efficiency measurement and detection rules

1 Scope

This specification stipulates the energy efficiency measurement of domestic solar hot water systems with a hot storage tank volume of less than 0.6m3.

Requirements, metrology and testing procedures, metrological testing methods, criteria for the assessment of measurement results, and test reports.

This specification applies to energy efficiency measurement of domestic solar hot water systems with a capacity of up to 0.6m3 Supervisor inspection, commission inspection can refer to this specification. Units that produce and sell home solar hot water systems can also refer to this specification is tested.

The tested domestic solar hot water system should be a product that the producers have passed their own inspection or imported by the seller.

Sales of goods.

2 references

This specification refers to the following documents.

JJF 1261.1-2017 Energy Product Energy Efficiency Measurement Inspection Rules GB/T 2829-2002 Periodic Inspection Count Sampling Procedures and Tables (Applicable to Inspection of Process Stability) GB/T 12936 Solar Thermal Terms GB/T 18708 Domestic solar hot water system thermal performance test method GB/T 19141 Domestic Solar Hot Water System Technical Conditions GB 26969-2011 Domestic solar energy hot water system energy efficiency limit and energy efficiency grade GB/T 26970 home split dual loop solar hot water system technical conditions for dated references, only dated editions apply to this specification; for undated references, the latest version (including all amendments) applies to this specification.

3 Terms and units of measure the following terms and units of measurement apply to this specification.

3.1 Unit outline lighting area daily useful heat (q17) dailyusefulenergypercontouraperture Areaofdomesticsolarwaterheatingsystem when the water temperature in the hot water storage tank is not lower than the specified value under a certain amount of solar radiation, the unit outline lighting area is stored in the hot water tank the daily useful heat of water is measured in units of MJ/m2.

3.2 Average Heat Loss Factor (USL) averageheatlossfactorofdomesticsolarwaterheatingsys-Tem in the absence of solar irradiation, when the temperature difference between the temperature of the water stored in the domestic solar hot water system and the ambient temperature is 1K, the single the average heat loss of a domestic solar hot water system per unit of time, in units of W/(m3·K).

3.3 Domestic solar hot water system energy efficiency coefficient (CTP) thecoefficientofthermalperformanceof Domesticsolarwaterheatingsystem

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 26 pages — is available in the English PDF.

How to Download JJF 1261.11-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
26 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJF 1261.11-2017

$455.00