Valid

JGJ/T 484-2019Technical Standards for the Intelligent System of Pension Service (Article Description) (English PDF)

养老服务智能化系统技术标准

Preview PDF

This is a limited preview

Buy now to download the full PDF (48 pages)

Need quotation for your management?

Get a formal quotation for JGJ/T 484-2019 in 30 minutes.

Issued by

Ministry of Housing and Urban-Rural Development of the People's Republic of China

Level / Type

National · Recommended

Issue date

January 1, 2019

Implementation date

March 1, 2020

Scope

JGJ/T 484-2019 is the English-translated version of 养老服务智能化系统技术标准.

JGJ/T 484-2019 is the Chinese standard "Technical Standards for the Intelligent System of Pension Service (Article Description)". It was issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China.

Found what you need?

Document preview — JGJ/T 484-2019

National Standard of the People's Republic of China

ICS
91.010
Classification
P07

Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China

Contents

  • [Preview only]
  • 1 General Provisions
  • 2 Terms and Symbols
  • 2.1 Terms
  • 2.2 Symbols
  • 3 Basic Requirements
  • 3.1 General Requirements
  • 3.2 Earthwork
  • 3.3 Ground Treatment
  • 3.4 Pile Foundation
  • 3.5 Shoring of Foundation Pit
  • 4 Masonry Works
  • 4.2 Additive Method
  • 4.3 Tent Healing Method
  • 4.4 Mortar Pumping
  • 4.5 Motor Spraying
  • 4.6 Disposals after Spraying
  • 5 Steel Bar Works
  • 5.2 Welding of Steel Bars at Subzero Temperature
  • 5.3 Carrying Capacity Calculation for Local Compressive Members
  • 5.4 Carrying Capacity Calculation for Axial Tensile Members
  • 5.5 Carrying Capacity Calculation for Flexural Members
  • 5.6 Carrying Capacity Calculation for Shearing Members
  • 5.7 Allowable Ratio of Height to Sectional Thickness of Wall or Column
  • 5.8 General Details
  • 5.9 Crack Resisting Details of Masonry Wall
  • 6 Concrete Works
  • 6.2 Heating, Mixing, Transportation and Placing of Raw Materials of Concrete
  • 6.3 Concrete Curing by Thermos Method and Comprehensive Thermos Method
  • 6.4 Concrete Curing by Steam Heating Method
  • 6.5 Concrete Curing by Electrical Heat Method
  • 6.6 Concrete Curing by Tent Healing Method
  • 6.7 Curing Method at Subzero Temperature
  • 6.8 Sulphoaluminate Cement Concrete
  • 6.9 Concrete Quality Control and Inspection
  • 7 Thermal Insulation and Roof Waterproof Works
  • 7.2 Construction of External Thermal Insulation Works
  • 7.3 Construction of Roof Thermal Insulation Works
  • 7.4 Construction of Roof Waterproofing Works
  • 7.5 Post-grouting of Large-diameter Belled Cast-in-place Pile
  • 7.6 Safety Measures
  • 8 Building Decoration Works
  • 8.2 Plastering Works
  • 8.3 Painting, Swabbing, Paperhanging and Glass Works
  • 8.4 Basic Requirements for Wall Construction
  • 8.5 Construction of Insulation Wall
  • 8.6 Construction of Core Column
  • 8.7 Constructional of Structural Column
  • 8.8 Construction of Infilled Wall
  • 8.9 Construction of Single-storey Building with Non-load Carrying Wall
  • 9 Steel Structure Works
  • 9.2 Materials
  • 9.3 Steel Structure Fabrication
  • 9.4 Steel Structure Installation
  • 9.5 Soft Package
  • 9.6 Glass Finish

1 Foreword

JGJ/T 484-2019 was issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China on 8 November 2019 and has been in force since 1 March 2020.

The JGJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 48 pages in English translation.

2 Scope Preview

JGJ/T 484-2019 falls under ICS 91.010, in the field of construction materials and building.

This catalogue holds 191 other JGJ/T standards in that field.

In this catalogue, JGJ/T standards carry edition years from 1984 to 2023.

3 About this standard

Sector: Building & Construction Industry Standard (Recommended)

Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China

English translation: about 48 pages (approximate)

Chinese original: about 71,730 characters

4 Related standards

Standards on related subjects:

JGJ/T 231-2021 — Technical standard for safety of disk lock steel tubular scaffold in construction

GB 50300-2013 — Unified standard for constructional quality acceptance of building engineering

JGJ/T 496-2022 — Uniform coding and basic attribute data standards for buildings and buildings

JGJ/T 489-2021 — Technical standard for digitalization of historic building

5 Classification and status

International classification (ICS): 91.010

Chinese Standard Classification (CCS): P 07

Prefix JGJ/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 48 pages — is available in the English PDF.

How to Download JGJ/T 484-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
48 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JGJ/T 484-2019

$1,200.00