Valid

JGJ/T 268-2012Technical specification for cast-in-situ concrete hollow floor structure (English PDF)

现浇混凝土空心楼盖技术规程

Preview PDF

This is a limited preview

Buy now to download the full PDF (71 pages)

Need quotation for your management?

Get a formal quotation for JGJ/T 268-2012 in 30 minutes.

Issued by

Ministry of Housing and Urban-Rural Development of the People's Republic of China

Level / Type

National · Recommended

Issue date

January 1, 2012

Implementation date

January 1, 2012

Scope

JGJ/T 268-2012 is the English-translated version of 现浇混凝土空心楼盖技术规程.

JGJ/T 268-2012 is the Chinese standard "Technical specification for cast-in-situ concrete hollow floor structure". This standard applies to industrial and civil buildings and general structures situ reinforced concrete and prestressed concrete hollow floor structure design, construction and acceptance.

It was issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China. It cites 1 other standard.

Found what you need?

Document preview — JGJ/T 268-2012

National Standard of the People's Republic of China

ICS
91.080.40
Classification
P54

Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China

Contents

  • [Preview only]
  • 1 General Provisions
  • 2 Terms and Symbols
  • 2.1 Terms
  • 2.2 Symbols
  • 3 Basic Requirements
  • 3.1 General Requirements
  • 3.2 Earthwork
  • 3.3 Ground Treatment
  • 3.4 Pile Foundation
  • 3.5 Shoring of Foundation Pit
  • 4 Masonry Works
  • 4.2 Additive Method
  • 4.3 Tent Healing Method
  • 4.4 Mortar Pumping
  • 4.5 Motor Spraying
  • 4.6 Disposals after Spraying
  • 5 Steel Bar Works
  • 5.2 Welding of Steel Bars at Subzero Temperature
  • 5.3 Carrying Capacity Calculation for Local Compressive Members
  • 5.4 Carrying Capacity Calculation for Axial Tensile Members
  • 5.5 Carrying Capacity Calculation for Flexural Members
  • 5.6 Carrying Capacity Calculation for Shearing Members
  • 5.7 Allowable Ratio of Height to Sectional Thickness of Wall or Column
  • 5.8 General Details
  • 5.9 Crack Resisting Details of Masonry Wall
  • 6 Concrete Works
  • 6.2 Heating, Mixing, Transportation and Placing of Raw Materials of Concrete
  • 6.3 Concrete Curing by Thermos Method and Comprehensive Thermos Method
  • 6.4 Concrete Curing by Steam Heating Method
  • 6.5 Concrete Curing by Electrical Heat Method
  • 6.6 Concrete Curing by Tent Healing Method
  • 6.7 Curing Method at Subzero Temperature
  • 6.8 Sulphoaluminate Cement Concrete
  • 6.9 Concrete Quality Control and Inspection
  • 7 Thermal Insulation and Roof Waterproof Works
  • 7.2 Construction of External Thermal Insulation Works
  • 7.3 Construction of Roof Thermal Insulation Works
  • 7.4 Construction of Roof Waterproofing Works
  • 7.5 Post-grouting of Large-diameter Belled Cast-in-place Pile
  • 7.6 Safety Measures
  • 8 Building Decoration Works
  • 8.2 Plastering Works
  • 8.3 Painting, Swabbing, Paperhanging and Glass Works
  • 8.4 Basic Requirements for Wall Construction
  • 8.5 Construction of Insulation Wall
  • 8.6 Construction of Core Column
  • 8.7 Constructional of Structural Column
  • 8.8 Construction of Infilled Wall
  • 8.9 Construction of Single-storey Building with Non-load Carrying Wall
  • 9 Steel Structure Works
  • 9.2 Materials
  • 9.3 Steel Structure Fabrication
  • 9.4 Steel Structure Installation
  • 9.5 Soft Package
  • 9.6 Glass Finish

1 Foreword

JGJ/T 268-2012 is issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China.

The JGJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 71 pages in English translation.

2 Scope Preview

This standard applies to industrial and civil buildings and general structures situ reinforced concrete and prestressed concrete hollow floor structure design, construction and acceptance.

JGJ/T 268-2012 falls under ICS 91.080.40, in the field of construction materials and building.

This catalogue holds 191 other JGJ/T standards in that field.

In this catalogue, JGJ/T standards carry edition years from 1984 to 2023.

3 Normative references

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document.

GB 3536-2008

4 About this standard

Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China

English translation: about 71 pages (approximate)

5 Related standards

Standards on related subjects:

GB/T 16311-2024 — Specification and test method for road traffic markings

GB 50788-2012 — Technical code for water supply and sewerage of urban

6 Classification and status

International classification (ICS): 91.080.40

Chinese Standard Classification (CCS): P 54

Prefix JGJ/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 71 pages — is available in the English PDF.

Referenced standards

Normative references

GB 3536-2008

How to Download JGJ/T 268-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
71 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JGJ/T 268-2012

$1,040.00