JGJ/T 264-2012Code for operation and maintenance of building mounted photovoltaic system (English PDF)
光伏建筑一体化系统运行与维护规范
This is a limited preview
Buy now to download the full PDF (24 pages)
Need quotation for your management?
Get a formal quotation for JGJ/T 264-2012 in 30 minutes.
Issued by
Ministry of Housing and Urban-Rural Development of the People's Republic of China
Level / Type
National · Recommended
Issue date
January 1, 2012
Implementation date
January 1, 2012
Scope
JGJ/T 264-2012 is the English-translated version of 光伏建筑一体化系统运行与维护规范.
JGJ/T 264-2012 is the Chinese standard "Code for operation and maintenance of building mounted photovoltaic system". This standard applies to acceptance and put into normal use BIPV system operation and maintenance.
It was issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China.
Found what you need?
Document preview — JGJ/T 264-2012
National Standard of the People's Republic of China
- ICS
- 91.040.01
- Classification
- P33
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
Contents
- [Preview only]
- 1 General Provisions
- 2 Terms and Symbols
- 2.1 Terms
- 2.2 Symbols
- 3 Basic Requirements
- 3.1 General Requirements
- 3.2 Earthwork
- 3.3 Ground Treatment
- 3.4 Pile Foundation
- 3.5 Shoring of Foundation Pit
- 4 Masonry Works
- 4.2 Additive Method
- 4.3 Tent Healing Method
- 4.4 Mortar Pumping
- 4.5 Motor Spraying
- 4.6 Disposals after Spraying
- 5 Steel Bar Works
- 5.2 Welding of Steel Bars at Subzero Temperature
- 5.3 Carrying Capacity Calculation for Local Compressive Members
- 5.4 Carrying Capacity Calculation for Axial Tensile Members
- 5.5 Carrying Capacity Calculation for Flexural Members
- 5.6 Carrying Capacity Calculation for Shearing Members
- 5.7 Allowable Ratio of Height to Sectional Thickness of Wall or Column
- 5.8 General Details
- 5.9 Crack Resisting Details of Masonry Wall
- 6 Concrete Works
- 6.2 Heating, Mixing, Transportation and Placing of Raw Materials of Concrete
- 6.3 Concrete Curing by Thermos Method and Comprehensive Thermos Method
- 6.4 Concrete Curing by Steam Heating Method
- 6.5 Concrete Curing by Electrical Heat Method
- 6.6 Concrete Curing by Tent Healing Method
- 6.7 Curing Method at Subzero Temperature
- 6.8 Sulphoaluminate Cement Concrete
- 6.9 Concrete Quality Control and Inspection
- 7 Thermal Insulation and Roof Waterproof Works
- 7.2 Construction of External Thermal Insulation Works
- 7.3 Construction of Roof Thermal Insulation Works
- 7.4 Construction of Roof Waterproofing Works
- 7.5 Post-grouting of Large-diameter Belled Cast-in-place Pile
- 7.6 Safety Measures
- 8 Building Decoration Works
- 8.2 Plastering Works
- 8.3 Painting, Swabbing, Paperhanging and Glass Works
- 8.4 Basic Requirements for Wall Construction
- 8.5 Construction of Insulation Wall
- 8.6 Construction of Core Column
- 8.7 Constructional of Structural Column
- 8.8 Construction of Infilled Wall
- 8.9 Construction of Single-storey Building with Non-load Carrying Wall
- 9 Steel Structure Works
- 9.2 Materials
- 9.3 Steel Structure Fabrication
- 9.4 Steel Structure Installation
- 9.5 Soft Package
- 9.6 Glass Finish
1 Foreword
JGJ/T 264-2012 was issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China on 26 December 2011.
The JGJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 24 pages in English translation.
2 Scope Preview
This standard applies to acceptance and put into normal use BIPV system operation and maintenance. It was issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China.
JGJ/T 264-2012 falls under ICS 91.040.01, in the field of construction materials and building.
This catalogue holds 191 other JGJ/T standards in that field.
In this catalogue, JGJ/T standards carry edition years from 1984 to 2023.
3 About this standard
Sector: Building & Construction Industry Standard (Recommended)
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
English translation: about 24 pages (approximate)
Chinese original: about 35,354 characters
4 Related standards
Standards on related subjects:
GB/T 50312-2016 — Code for engineering acceptance of generic cabling system
GB 50339-2013 — Code for acceptance of quality of Intelligent building systems
JGJ/T 263-2012 — Standard for module coordination of residential bathroom
JGJ/T 262-2012 — Standard for modular coordination of residential kitchen
5 Classification and status
International classification (ICS): 91.040.01
Chinese Standard Classification (CCS): P 33
Prefix JGJ/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.
How to Download JGJ/T 264-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JGJ/T 492-2023 — Standard for seamless construction of ultra-long concrete structures (with description)
JGJ/T 497-2023 — Technical standards for prestressed steel structures (with clarifications)
JGJ/T 493-2022 — Professional skill standards for intelligent building administrators
JGJ/T 264-2012
$315.00