JGJ 286-2013Design standard for thermal environment of urban residential areas (English PDF)
城市居住区热环境设计标准
This is a limited preview
Buy now to download the full PDF (81 pages)
Need quotation for your management?
Get a formal quotation for JGJ 286-2013 in 30 minutes.
Issued by
Ministry of Housing and Urban-Rural Development of the People's Republic of China
Level / Type
National · Mandatory
Issue date
January 1, 2013
Implementation date
January 1, 2013
Scope
JGJ 286-2013 is the English-translated version of 城市居住区热环境设计标准.
JGJ 286-2013 is the Chinese standard "Design standard for thermal environment of urban residential areas". This standard applies to urban residential areas detailed planning stage of the thermal environment design.
It was issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China.
Found what you need?
Document preview — JGJ 286-2013
National Standard of the People's Republic of China
- ICS
- 91.040.30
- Classification
- P33
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
Contents
- [Preview only]
- 1 General Provisions
- 2 Terms and Symbols
- 2.1 Terms
- 2.2 Symbols
- 3 Materials
- 3.1 General Requirements
- 3.2 General Plan
- 3.3 Ledger Board
- 3.4 Adjustable Forkhead
- 3.5 Steel Shapes in Cantilever Scaffold
- 3.6 Diaphragm System
- 3.7 Limitations for Story Drift and Comfort
- 3.8 Strength Design of Members
- 3.9 Seismic Design Grade of Structural Members
- 4 Architectural Design
- 4.2 Entrance/Exit and Ramp
- 4.3 Parking Area
- 4.4 Constructional Measures
- 4.5 Auxiliary Space
- 4.6 Durability Requirements
- 5 Building Design
- 5.2 Entrance/Exit
- 5.5 Calculation for Upright Tube Foundation Bearing Capacity
- 5.6 Calculation for Steel Shapes Cantilever Scaffold
- 5.7 Design of Upright
- 5.8 Connection of Curtain Wall and Main Structure
- 5.9 Checking of Fatigue
- 6 Structural Design
- 6.5 Door Opening
- 6.6 Bridging and Diagonal Brace
- 6.7 Inclined Platform
- 6.8 Full Scaffold
- 6.9 Full Formwork Support
- 7 Construction
- 7.2 Water Supply and Drainage
- 7.3 Heating and Ventilation
- 7.4 Electricity
- 7.5 Installation Construction Safety of Curtain Wall
- 7.6 Removal of Flying Shuttering
- 7.7 Removal of Tunnel Shuttering
- 8 Shear Wall Structural Design
- 8.1 General Requirement
- 8.2 Check and Accept for Scaffold
- 8.3 Lighting Style and Type
- 8.4 Emergency Lighting
- 8.5 Lighting Control
- 8.6 Medical Mark Lighting
- 8.7 Energy Saving of Lighting
- 9 Multi-storey Shear Wall Structure Design
- 9.2 Frame-corewall Structure
- 9.3 Tube in Tube Structure
- 9.4 Electric Shock Protection
- 9.5 Electromagnetic Compatibility
- 9.6 Harmonic Control
1 Foreword
JGJ 286-2013 is issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China.
The JGJ prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.
The document runs to 81 pages in English translation.
2 Scope Preview
This standard applies to urban residential areas detailed planning stage of the thermal environment design. It was issued by Ministry of Housing and Urban-Rural Development of the People's Republic of China.
JGJ 286-2013 falls under ICS 91.040.30, in the field of construction materials and building.
This catalogue holds 95 other JGJ standards in that field.
In this catalogue, JGJ standards carry edition years from 1980 to 2019.
3 About this standard
Sector: Building & Construction Industry Standard
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
English translation: about 81 pages (approximate)
Chinese original: about 121,145 characters
4 Related standards
Standards on related subjects:
GB/T 50312-2016 — Code for engineering acceptance of generic cabling system
GB 50339-2013 — Code for acceptance of quality of Intelligent building systems
JGJ/T 285-2014 — Technical specification for the remote monitoring system of public building energy consumption
JGJ 284-2012 — Code for electrical design of financial buildings
5 Classification and status
International classification (ICS): 91.040.30
Chinese Standard Classification (CCS): P 33
Prefix JGJ: mandatory standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 81 pages — is available in the English PDF.
How to Download JGJ 286-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JGJ 144-2019 — Technical standard for external thermal insulation on walls
JGJ 459-2019 — Technical standard for self-climbing integrated scaffolding and formwork equipment with steel platform
JGJ 475-2019 — Standard for design of energy efficiency of residential buildings in moderate climate zone
JGJ 286-2013
$1,550.00