JC/T 963-2005Building industrial automatic brick cutter (English PDF)

1 Foreword

JC/T 963-2005 was issued by Ministry of Industry and Information Technology on 14 February 2005 and has been in force since 1 July 2005.

2 Scope

This standard specifies: Building industrial automatic cut billet machine the type, model and basic parameters, technical requirements, test methods, inspection rules and signs, packaging, transportation and storage, This standard applies to: Building industrial automatic cut blanks machine (hereinafter referred to as automatic cut billet machine).It cites 11 other standards.

3 Normative references

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document.

JC 532

JC/T 402

JC/T 406

GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications

GB/T 13306-1991

GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications

GB/T 2346-2003 — Fluid power systems and components -- Nominal pressures

GB/T 3768-1996

GB/T 699-1999

GB/T 7932-2003

GB/T 9439-1988

4 About this standard

Issued by: Ministry of Industry and Information Technology

English translation: about 8 pages (approximate)

5 Classification and status

International classification (ICS): 91.110

Chinese Standard Classification (CCS): Q 91

Prefix JC/T: recommended standard.